Construction of Amphitheatre, Cafeteria & Restrooms, Development of Park/Garden, Landscaping, Beautification, Children Play Area, Provision for Toy Train, Construction of Rest Areas, Walkways, Cascading, Waterfalls, Museum and other related Civil, Mechnical & Electrical works for Establishment of Theme Park project at South East Corner of New Mega Dairy Premises for Hassan Milk Union at KIADB Industrial area, Hassan

Construction of Amphitheatre, Cafeteria & Restrooms, Development of Park/Garden, Landscaping, Beautification, Children Play Area, Provision for Toy Train, Construction of Rest Areas, Walkways, Cascading, Waterfalls, Museum and other related Civil, Mechnical & Electrical works for Establishment of Theme Park project at South East Corner of New Mega Dairy Premises for Hassan Milk Union at KIADB Industrial area, Hassan

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

More than 2m Filling

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...

Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0....

Tack coat on Bituminous surface Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broo...

Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight of total...

Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 percent of mix and filler, tra...

Providing and laying 3mm thick asphalt seal pad made of actatic polypropylene polymer (app) modified bituminous pad reinforced with non woven polyester mat of high bear strength as a carrier (confirmi...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions more than 10MSA upto 20MSA f...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewallsand gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of P...

Construction of Median and Island with Soil Taken from Roadway Cutting Construction of Median and Island above road level with approved material deposited at site from roadway cutting and excavation f...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

same as above with cost of dewatering

In all kinds of soils Depth 3m to 6 m

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Providing and Filling in foundation with granite / trap broken metal 100mm. And down size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour with...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

PCC for Open Foundation Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

PCC for Open Foundation Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

PCC for Open Foundation Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Same as above in Foul & Under water Condition

PCC for Open Foundation Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a ...

Same as above in Foul & Under water Condition

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Floor Ht 3.6 to 6m-1% Lift Charges

Floor Ht (6 to 9m)-2% Lift Charges

Floor Ht (9 to 12m)-3% Lift Charges

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

Floor Ht Upto 3.6 to 6m Ht

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Sub Structure Concrete Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel wo...

Same as above in Foul & Under water Condition

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Form Work for Foundation a) Open Foundation (4% on finished rate of concrete per m3)

Floor Ht Upto 3.6 to 6m Ht

Form Work for Foundation Plinth Beams of building 50%

Column Shuttering a) RCC Column (70% on finished rate of concrete per m3) Floor Ht Upto 0 to 3.6m Ht

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

Floor Ht Upto 9 to 12m Ht

Column Shuttering a) Piers & Abutments 10%

Form Work Beams a) RCC Beams, Lintels (60% on finished rate of concrete per m3) Floor Ht Upto 0 to 3.6m Ht

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

Floor Ht Upto 9 to 12m Ht

Form Work Slab a) RCC Roof Slab,chejja (50% on finished rate of concrete per m3) Floor Ht Upto 0 to 3.6m Ht

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

Floor Ht Upto 9 to 12m Ht

Form Work Chejjas a) RCC Chejjas (45% on finished rate of concrete per m3)

Form Work Slab For Curved RCC Roof Slabs, Domes & Sloped Roofs (70% on finished rate of concrete per m3) Floor Ht Upto 0 to 3.6m Ht

Floor Ht Upto 3.6 to 6m Ht

Form Work for Staircase and Other Similar Structure (50% on finished rate of concrete per m3) Floor Ht Upto 0 to 3.6m Ht

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

Form Work for Canal lining (only verticle sections) 10%

Form Work for Cement Concrete Drain Walls (35% on finished rate of concrete per m3)

Floor Ht Upto 3.6 to 6m Ht

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

For Substructure

For Buildings Floor Ht Upto 0 to 3.6m Ht

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

Floor Ht Upto 9 to 12m Ht

For Foundation of Bridges

For Canal & Allied Works

For Super structure of Bridges

Providing Steel Liner 10 mm thick for Curbs and 6 mm thick for Steining of Wells including Fabricating and Setting out as per Detailed Drawing.

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

Floor Ht Upto 9 to 12m Ht

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , includining ...

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...

Floor Ht Upto 3.6 to 6m Ht

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Floor Ht Upto 3.6 to 6m Ht

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joi...

Floor Ht Upto 3.6 to 6m Ht

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...

Floor Ht Upto 3.6 to 6m Ht

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Anti-skid / matt finish tile flooring for baths Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Ba...

Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel o...

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made o...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete.

Providing & Fixing in position Acoustical wall panelling with Integral Densified Square/Butt edged Fully Perforated Eco Friendly Lightweight Calcium Silicate panels/tiles with fabricated galvanised mi...

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

Celling plastering : Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and rem...

Floor Ht Upto 3.6 to 6m Ht

Internal Plastering Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, ...

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

Floor Ht Upto 9 to 12m Ht

External plastering : Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement p...

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

Floor Ht Upto 9 to 12m Ht

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Floor Ht Upto 3.6 to 6m Ht

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Floor Ht Upto 3.6 to 6m Ht

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbent single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size compris...

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-inc...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing Jungle wood such as Nerale, Neem wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications.

UPVC windows (sliding) Providing fixing of 3 track 3 track x 2 Panel with mesh Specification for uPVC windows chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6P...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as per gr...

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...

Floor Ht Upto 3.6 to 6m Ht

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge 22.15.2) SS Handles 300mm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and applying white cement based putty of average thicknes 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per spe...

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

Floor Ht Upto 9 to 12m Ht

Internal painting & Ceiling Painting Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resis...

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

Floor Ht Upto 9 to 12m Ht

External painting: Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/...

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

Floor Ht Upto 9 to 12m Ht

External painting: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of requi...

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 6 to 9m Ht

External painting Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remov...

Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and f...

Floor Ht Upto 3.6 to 6m Ht

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

Floor Ht Upto 3.6 to 6m Ht

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

Providing and applying two coats of ready mix paint of approved brand on steel surface after thorough cleaning of surface to give an even shade

Same as above with Enamel paint

Gopura Construction with Cement, Brick, Copper wire, Surya Powder, M sand, Sarve polls, Painting and Labour Charges.

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Floor Ht Upto 3.6 to 6m Ht

Floor Ht Upto 9 to12m Ht

Retaining Wall (Inside) / OHT / UG Sump Tanks: Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The material having chemical resistance p...

UGTorOHT (inside) waterproofing with Antimicrobial Coating Providing and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti algae, a...

Floor Ht Upto 3.6 to 6m Ht

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

With MS angle of 65 x 65 x 10mm

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Floor Ht Upto 3.6 to 6m Ht

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

For All Other Ht

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of approv...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and Fixing of Shingles roof with necessary base preparation by screed and fixing of Shingles of approved shades / make (Saint gobain or equialent) and colour. Floor Ht Upto 0 to 3.6m Ht

Floor Ht Upto 3 to 6m Ht

Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charg...

Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete

Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete.

Providing and Fixing 15 mm thick densified tegular edged eco friendl light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on i...

Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with peed of 1mtr per second, variable voltage variable requency drive, with or without machine ro...

14.4 (D) With Out Machine Room-SS Finish 14.4.3 10 PASSANGERS 3 STOPS

Providing and laying of an elastomeric slab steel expansion joint, catering to right or skew (less than 20 deg., moderately curved with maximum horizontal movement upto 50 mm, complete as per approved...

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. As per MoRT &H Technical Specification Clause 2504 .

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than...

Providing & Placing Pebble Stones of required size & shape (as per instruction / architectural details)

AV Systems & Projector VIEWSONIC 950 4K PROJECTOR

400inch 16:9 PERFORATED FIXED SCREEN

SWITCH AUDIO 15"SPEAKERS

SA X10 10"SPEAKERS

SA DPA 12 AMPLIFIER

SA DPA 21 AMPLIFIER

HDMI CABLES,SPEAKER CABLES,MOUNTS,INTERCONNECTS ,BRACKETS

INSTALLATION AND DELIVERY

Acoustics & Seating WALL ACOUSTICS

CEILING ACOUSTICS

AUDITORIUM CHAIR

Supply of 1. Flap Barrier SS304, 520mm Passage Width, Anti-Tailgating 2. Flap Barrier SS304, 900mm Wide Passage, Anti-Tailgating (Accessible Gate) , rates inclusive of transportation charges.

Supply of Ticketing Software Online & Offline Ticketing Management System, rates inclusive of transportation charges.

Supplyg of Zebra DS457 Fixed Barcode Scanner, rates inclusive of transportation charges.

Supply of People Counting System, rates inclusive of transportation charges.

Supply of On-Premises Software License (Real Time Count) for 3 years, rates inclusive of transportation charges.

Supply of Walkthrough Metal Detector 9 Zones, rates inclusive of transportation charges.

Supply of Hand Held Metal Detectors, rates inclusive of transportation charges.

Supply Installation testing Commissioning of Baggage Scanner Tunnel Size 500mmW x300mmH rates inclusive of transportation charges

Supply of Server for Monitoring, rates inclusive of transportation charges.

Supply of Jack Panel- 24 Port, rates inclusive of transportation charges.

Supply of 6U Network Rack with All Accessories, rates inclusive of transportation charges.

Supply of Cat 6 Cable, rates inclusive of transportation charges.

Supply of Power Cable with Accessories, rates inclusive of transportation charges.

Installation, testing & Commissioning of above items Installation, rates inclusive of transportation charges.

Supply, Installation & Commissioning of Furnitures including Reception Chair - Aero High Back Knitted Fabric Ergonomic Office Chair (Earthstone), rates inclusive of transportation charges. Make Godrej...

Supply, Installation & Commissioning of Furnitures including Office Table - Nilkamal Endura - Width (cm) 120, Depth (cm) 60, Height (cm) 75, rates inclusive of transportation charges. Make Nilkamal Fu...

Food Kiosk Supply, transportation & installation of Food Kiosk (size 10ft X 10ft X 7ft)

INTERNAL DRAINAGE, DUCTS AND SUSPENDED LINES (Supplying and Installing) Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark a...

Pipes of SN 4, 75mm dia.

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete (1 Multifloor trap)

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...

Extra for depth beyond 45 cm of brick masonry chamber : For 455x610 mm size With common burnt clay (non modular) bricks of class designation 3.5

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

Constructing Pre-cast RCC Machinehole 1.5 m internal dia. , 2.0 M depth & SFRC cover & frame

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

6 Kg/sqm :110mm(weight of pipe -1.894 kg)

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Supply,fixing,testing comissioning of multi inlet PVC floor trap with boss coupler suitable for ceiling suspended/sunken system with minimum 50mm water seal moulded ,with or with out vent arm jointing...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Rain water pipes (external in shafts/ slabs etc) Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to...

Supplying and fixing of approved make at site GI Slotted Rail Brackets,hangers,c clamp supports with necessary drilling holes to suit the insirtion of pipe clamps, deburring etc.,as per detailed drawi...

Butterfly valve Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of...

Ball Valves Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092 25 mm dia

65 mm dia(63 mm dia in SR )

Supply ,fixing,testing and comissioning of the cast iron Y type strainer body with suitable flanged ,tested 15KG sqmm confirming IS 210 Gr Fg 200 with screen of SS304 standards and including a set of ...

20 mm air release valve

Supply,Installation, testing and commissioning of water meter confirming to IS 4064(1) neccesary fittings such as threaded pieces, unions, check nuts complete as required for following dia as per the ...

Supply and fixing of plastic ball float valve with gun metal lever of IS specification make and approved by the client / consultant for muncipal water inlet pipe to UG sump as per the directions of en...

Supplying & Fixing at site in position Fabricated u PVC Astm Sch 80 Puddle flanges in the overhead water tanks as per the drawings and the requirement of the Project Manager. 80 mm dia

Providing of 4 pair 1.5 sq mm cable as control cable of liquid water level controller including ISI Heavy duty 20mm conduit as per the directions of engineer in charge.

Providing and fixing 130 mm size floor clean outs stainless steel as per the directions of engineer in charge with all the necessary fittings.

Construction of a 25 KLD Sewage Treatment Plant (STP), including detailed design and execution of all civil works, and the design, supply, installation, testing, and commissioning of all required elec...

The scope also includes commissioning and two (2) years of operation and maintenance of the STP as per the directions of engineer in charge.

Supply & Installation of Water treatment plant ( WTP) of capacity 30 KLD including water sump of capacity 25 KLD including civil tanks as per the directions of engineer in charge.

Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....

Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...

Providing Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends: 150 X 90

WATER SUPPLY (Supplying and Installing) Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes joint...

25 mm nominal dia pipes

32 mm nominal dia pipes

Providing, fixing ,testing and commissioning of uPVC SCH-80 pipes confirming to ASTM D- 1785, including all fitting uPVC SCH-80 conforming to ASTM D 2467, like tees, elbows ,bends, unions, coupling, r...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing of Gunmetal Ball Valve of Non rising stem, screwed in bonnet, inside screw, integral seats, screwed female ends to IS:554/ BS 21/ ISO 7, Unbreakable sheet metal Handwheel, confoming to IS:77...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Construction of RCC Machinehole chambers of 1:1.5:3 proportionor approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, dan...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

SANITARY FIXTURES & BATH FITTINGS Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including in...

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operation...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class b.Premium

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

C.P. Brass long body bibcock 15 mm

Providing and fixing Robe hook with 5 points made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class b.Premium

C.I. grating 180X180 mm

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 g

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...

LIGHT FIXTURES &ACCESSORIES Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, P...

Supplying of recess mounting non integrated type LED down light...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB w...

11.4.4) 24W - LED Spot light

Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI less than 80. Power Input: 220-240V @ ...

Supplying & fixing- flexible LED Strip Light.....W Power consumption in 5ms length CCT 6500 degree K, CRI less than 70%. efficacy less than 80 lumen per W, life less than 25000 burning hours and Compl...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Supply of LED Bollard light fitting of ...W with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection mould...

Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications.

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

FANS & AIR CONDITIONERS Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V...

Supplying wall mounting fan suitable to operate at single- phase 230v AC. Supply 6.5.2).400 mm Sweep

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of...

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 6.2.2) 15" Sweep (450 mm)

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R41...

6.8.5) 1.5 Ton capacity

6.8.6) 2 Ton capacity

SWITCHES, SOCKETS & ACCESSORIES Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.1) 6A One Way Switch

3.6.7) 16A One Way Switch

3.6.10) 6/16A Universal Socket

3.6.12) RJ45/I.O Outlet Cat-6

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

3.5.4) 6 Module

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...

2.1.2) Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch

2.1.3) Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

LIGHT POINT WIRING Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper ...

2.1.3) Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3...

Supplying and drawing of 2 Core X 1.5 Sqmm copper conductor armoured cable

CIRCUIT AND POWERPOINT WIRING Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed syst...

Supplying and drawing UTP-CAT 6E LAN cable.

Supplying & Fixing of Patch panel for LAN cabling 8.12.2) 24 Port 101100 patch panel

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supply & Fixing : Outdoor/Indoor 2.0MP IP IR Bullet camera

Supply and Installation of H.265 2MP 32x Network IP PTZ Camera, 1/2.8” CMOS, 200M IR, SD Card 256GB support, IP66/IK10, Smart IVA having AI-Based Analytics: Motion detection, facial recognition, ANP...

Supply and Installation of H.265 4MP IR Vandal Proof Dome N/W Camera, 2.8mm, 30M, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA having AI-Based Analytics: Motion detection, facial recognition, ANPR, and s...

Supply and Installation of Pole mount bracket for PTZ Camera having as part of the product mandate specification kit provides adjustable angle, complete as per approved specifications and drawings.

Supply and Installation of Pole for Camera 3 to 6 mtr having to ensure optimal field of view and avoid obstructions such as trees, structures, or moving vehicles & camera poles of 3 to 6 meters in hei...

Supply, installation, testing & commissioning of smart managed L2 8 port POE switch of 10/100/1000 Mbps with 2 Gig SFP. & power budget of min. 120W. The switch shall be mounted on existing rack. The r...

Supply, installation, testing and commissioning of network video recorder Supporting up to 8 Camera Streams with 8TB HDD , shall support windows platform, warning system alerts for fan fault, HDD temp...

Supply and fixing of switch mounting rack with power manager and cable manager 8.4.3) 9U with 450mm depth

Supply, Installation, testing and Commissioning of 40" LED TV without tuner for monitoring the cameras.

Supply, Installation, Testing, and Commissioning of Intelligent Call station with Accessories and Connection Hardwares complete as per approved specifications and drawings. The station enables manual,...

Supply, Installation, Testing & Commissioning of Mixer amplifier, 60 Watt, USB/BT complete with all standard accessories as per the tender specification.

Supply, Installation, Testing, and Commissioning of 24U Equipment Rack for housing all rack mountable equipments with internal wiring, front glass door; heat dessipation fans; movement wheels, power d...

Supply and Installation of Supply, Installation, Testing, and Commissioning of Connector & Patch Cables complete with all standard accessories as per the tender specification essential for linking act...

DB AND METER BOARD Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wo...

1.1.2) 25 mm dia 2 mm thick

1.2.4) 40 mm dia 2.5 mm thick

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

5.19.7) 6 Way SP & N

5.19.8) 8 Way SP & N

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 5.20.5) 63A 2 pole

EARTHING Grounding of towers including cost of 40 mm dia 2.5 mm thick, class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excav...

Supplying & Laying cable trays including welding, fixing of supports i) Cable tray of 600 mm width (suitable for cable ducts of A, B & C type)

Providing and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...

Suplly, Installation, Testing and commission of 50 W Speakers

Suplly, Installation, Testing and commission of 500W/240 V RMS Amplifier

Suplly, Installation, Testing and commission of 1x 6/8 Channel Mixer Controller

Suplly, Installation, Testing and commission of mounting hardware / brackets / clamps for speakers

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

4.2.4) 6 m - Top 70 mm and Bottom 130 mm dia

4.2.2) 4 m - Top 70 mm and Bottom 130 mm dia

Fabrication, Supplying, Erection, Testing and Commissioning of ...... ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) ...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

11.9.1) LED Floodlight 70W

Supply of LED pole mounting type post top lantern with pressure die castaluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection ...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supply and fixing of 4Pole Power Contactor With No NC Contacts on existing wood panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40AMPS

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying and fixing angle iron frame work fabricated out of M.S angle iron and M.S flat 50X50X6MM with bolts washers and painted with 2 coats of red oxide and then two coats of approved paint 50X50X6...

Fabricating supplying and mounting MS box made out 14 SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped w...

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.

Supplying of on load change over switches 4 poles, AC 23Amps duty 415V, 50HZ, AC Supply. (Open Execution) Upto 63Amps.

Supplying, fixing and wiring rotary selector switch suitable for Ammeter.

Supplying, fixing and wiring 3 phase Digital Ammeter Voltmeter.

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32 63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter.

SOLAR PANNEL ACCESSORIES Supplying, Installation, commissioning, Liasoning & synchronization of Solar Panels 600 Wp

Supplying, Installation, commissioning, Liasoning & synchronization of String Inverter 100KW

BOS Components Supplying and fitting Aluminium rails, DCDB & ACDB DC / AC Cables (Make : Polycab) Earthing, Lightning arrestor Walkway & side hand rails Conduits & accessories 500KW

TERMINATION BOXES Supply, installation, testing and commisioning of self extinguishing, weatherproof cabinets suitaible tfor outdoor application (IP 65, IK 09) with reversible door and cabinet with te...

Supply, installation, testing and commisioning of self extinguishing, weatherproof cabinets suitaible tfor outdoor application (IP 65, IK 09) with reversible door and cabinet with terminals for loopin...

Surge Protection device Supply installation testing and commissioning of Surge protection devices of the following class protection DIN rail mounting type suitable for fixing it in DB/VDB's, with all ...

EARTHING Supplying & earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe ...

Supplying & Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. withcharcoa...

Supplying and laying 25 mm X 6 mm copper strip at 0.50 meter below ground/wall surface/cable tray as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as req...

Supplying and laying 25 mm X 3 mm copper strip at 0.50 meter below ground/wall surface as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Joi...

Providing and fixing 25 mm X 5 mm G.I. strip on surface/cable tray or in recess for connections etc. as required.

Supplying and laying10 SWG G.I. wire surface/cable tray for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.

HT/LT CABLE SUPPLY HT Cable : Supply of following 11kV (E) grade XLPE insulated PVC sheathed compact circular armoured aluminium conductor HT power cable, insulation screened with extruded semi conduc...

MV/LTCable Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx240sq.mm Al Cable

3.5cx185sq.mm Al Cable

3.5cx150sq.mm Al Cable

3.5cx120sq.mm Al Cable

3.5cx95sq.mm Al Cable

3.5cx35sq.mm Al Cable

4cx16sq.mm Al Cable

4cx10sq.mm Al Cable

4x4sq.mm Al Cable

3x6sq.mm Al Cable

3x4sq.mm Al Cable

3x2.5sq.mm Cu Ar Cable

3x1.5sq.mm Cu Ar Cable

Supply of the following size Control Copper Cables, Solid Copper conductor upto 6sqmm balance Stranded, XLPE Insulated, cores laid up, PVC tape innersheathed for Multicore Cables, Unarmoured/Armour (G...

2cx2.5sq.mm Cu Control Cable

LAYING OF HT/MV CABLES Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade offollowing size in the existing masonry open duct as required. Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the t...

Above 185 sq. mm and upto 400 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray/wall surface as required. Upto 35 sq. mm (clamped with 25/ 40x3mm MS f...

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/ 40x3mm MS flat clamp)

Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.l. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in groun...

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size in the existing masonry open duct as required with proper clamping at intervals. Above 120 sq. m...

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size in the existing RCC/HUME/ METAL pipe as required. Above 120 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size in the existing cable tray as required. Above 120 sq. mm and upto 400 sq. mm

HT/MV CABLE TERMINATIONS Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1...

3.5cx185sq.mm Al Cable

3.5cx150sq.mm Al Cable

3.5cx120sq.mm Al Cable

3.5cx95sq.mm Al Cable

3.5cx35sq.mm Al Cable

4cx16sq.mm Al Cable

4cx10sq.mm Al Cable

4x4sq.mm Al Cable

3x6sq.mm Al Cable

3x4sq.mm Al Cable

Supply and making end termination with brass double compression gland, earth clip and aluminum lugs/ Cu lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminum conductor cable of 1.1k...

12Cx2.5 sq.mm Cu Control Cable

Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable o...

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable ...

CABLE TRAY Supplying and installing following size of perforated pre-painted M.S/GI Hot Dipped Galvanized cable trays with perforation not more than 17.5%, in convenient sections, joined with connecto...

HT PART Unitised Sub Station-Indoor-with VCB Panel-250 KVA Supply Installation testing & commissioning of 11KV/433V, 3 phase,250kVA vector DYN-11 USS with offcircuit tappings from +10% to -15% in step...

HT TOD Meter Supply, Installation, testing & commissioning of 3 phase 4 wire according to IS14697-1999, CBIP-325, IS 159595A, class: 0.2S, TOD meter with, LCD with backlit display of Electricity board...

Metering Cubicle-HT Supply Installation, testing & commissioning of cubicle type, dust and vermin proof, floor mounted, front operated HT Metering cubicle made out of 14 SWG thick CRCA sheet, fully co...

160 kVA DIESEL GENERATOR Supply & Installation of, of radiator cooled 3 phase, 415V plus or minus 0.1%, 0.8pf 50hz. prime rated DG set of the rating 160KVA/128KW, Diesel Generating Set with CPCB appro...

82.5 kVA DIESEL GENERATOR Supply, of radiator cooled 3 phase, 415V plus or minus0.1%, 0.8pf 50hz. prime rated DG set of the rating 82.5KVA/66KW, Diesel Generating Set with latest CPCB approved acousti...

EXHAUST PIPES Supply, erection, commissioning of additional length of exhaust pipes with long radius bend from residential silencer with necessary clamps, fixtures, civil works and painted with heat r...

Supply & providing insulation for exhaust pipe with thermal insulation and providing aluminium cladding as per standards.

UPS Installation 5 kVA UPS Supply Installation, and commissioning of 5kva UPS stand-alone Configuration. single phase in and out. without isolation transformer (IP20), Input pf 0.99, it shall be 100% ...

1 kVA UPS Supply Installation, and commissioning of 1 kva UPS stand-alone Configuration. single phase in and out. without isolation transformer (IP20), Input pf 0.99, it shall be 100% generator compat...

MV PANELS 70 kVAr APFC PANEL Supply,erection, testing and commissioning of 16 SWG freestanding indoor cubicle made of CRCA sheet steel with seven tank process. Automatic power factor control panel o...

MSBSupply,Installation, testing commissioning of cubicle type, dust and vermin proof, floor mounted, front operated MV panel board made out of 16 SWG thick CRCA sheet, fully compartmentalised complete...

SUB PANEL-1 Supply,Installation, testing & commissioning of cubicle type, dust and vermin proof, floor mounted, front operated MV panel board made out of 16 SWG thick CRCA sheet, fully compartmentalis...

SUB PANEL 2 Supply, installation, testing & commissioning of cubicle type, dust and vermin proof, floor mounted, front operated MV panel board made out of 16 SWG thick CRCA sheet, fully compartmentali...

FEEDER PILLER 01 Supply installation testing & commissioning GlassFiber Reinforced Polyester (GRP) EnclosureIngress Protection of IP66 (IEC 60529) & Mechanical Impact Strength of IK10 (IEC 62262). IP6...

FEEDER PILLER02 Supply installation testing and commissioning GlassFiber Reinforced Polyester (GRP) EnclosureIngress Protection of IP66 (IEC 60529) & Mechanical Impact Strength of IK10 (IEC 62262). IP...

MISCELLANEOUS Supply, and Providing the following:- Synthetic insulating mats conforming to IS: 15652:2006 use to 3.3 - 11kV voltage - 2.5 mm Thick, 2Mtr Length 1 Mtr Width

Synthetic insulating mats conforming to IS: 15652:2006 use to 3.3 - 11kV voltage - 2 mm Thick, 2Mtr Length 1 Mtr Width

DCP type 5Kg fire extinguisher or equivalent.

Co2 type fire extinguishers

Caution board (HT & LT )

Shock treatment chart as per the Electrical Inspectorate scope

Rubber gloves (11KV) 1 pair

First aid box with all items

Supply and installing of DG exhaust support etc using structural steel work (riveted, bolted or welded) in built up sections, including angle, channel, I section, necessary nut and bolt and all requir...

Supply and installing of Cable tray support outdoor etc using structural steel work (riveted, bolted or welded) in built up sections, including angle, channel, I section, necessary nut and bolt and al...

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing ...

Supply installation testing and commissioning of 30kW DC wall box with single CCS2 gun, cable 5 meters (from Charger to EV), with metallic cable hanger, 415VAC, 50Hz, 3, 5Wire (L1, L2, L3, N & PE), wi...

Kitchen Equipments Tandoor Bhatti: St. Steel body with wheels, the unit will have a glass wool insulation apart from Packing of mud, glass pieces and sand. An ash collecting door is provided on one s...

Granite Top Table with 1 Under Shelf: Work Table with 19mm granite top and St. Steel frame & with one under shelf. Size: 32" x 24" x 34"

Single Sink: Made out of St. Steel 16 Swg, Sink size: 18” x 18” x 10” deep Overall Size: 32” x 20” x 34” + 6”

Single Burner Cooking Range: Made out of St. Steel, 16 Swg top and 18 Swg body. The unit is fitted with all fittings and accessories Size: 24” x 24” x 30”

Two Burner Cooking Range: Made out of St. Steel , 16 Swg top and 18 Swg body. The unit is fitted with all Fittings and accessories. Size: 46” x 24” x 30”

Masala Table 1 under shelf: Made out of St. Steel , 16 Swg top and 18 Swg body with 1 under shelf. Size: 30” x 20” x 34”

Three Burner Chinese Cooking Range: Made out of St. Steel, 16 Swg top and 18 Swg body with two Chinese pan support & one stock pot burner with drain channel and 12’’ splash. The unit is fitted...

Dosa Bhatti: Made out of St. Steel 16 / 18 Swg with a M.S plate of ¾” thickness, the unit Will be provided with burners and all fittings and accessories. Plate Size: 48” x 24” x ¾” thicknes...

Dosa Work Table: Made out of St. Steel, 16 Swg with 4 round containers with 1 under shelf Size: 24” x 24” x 34”

Work Top Refrigerator: Inner & outer body made out of St. Steel. The refrigerator will have 2 doors with PUF insulated with Emerson Climate Technology Compressor. It will have 2 Overhead Shelf Size:...

Six Hole Hot Case: Made out of St. Steel, with Six round containers with lid, the unit will be electrically operated with thermostatic control.

Pickup  Table  with  2  under  shelf  &  2 over head shelf: Made out of St. Steel, 16 Swg top and 18 Swg 2 under shelf & 2 over head shelf. The unite will be covered on all three sides...

Work Table: Made out of St. Steel, 16 Swg top and 18 Swg 2 under shelf & 2 over head shelf. The unite will be covered on all three sides. Size: 46” x 24” x 34” + 18” +12”

Two Hole Hot Case: Made out of St. Steel, with two round containers with lid, the unit will be electrically operated with thermostatic control

Single Burner for Tea/ Coffee: Made out of St. Steel, 16 Swg top and 18 Swg body. The unit is fitted with all fittings and accessories. size:20” x 20”

Idly Plant: (120 Idly Cap): Made out of St. Steel, 16 Swg 2 compartments, with 20 idly 06 trays, steam operated unit will be mounted on a St. Steel stand.

Steam Boiler: (L.P.G operated 9 Kw Cap) The inner shell is made out of 6mm M.S sheet and 3” TATA “C” class pipe. The outer shell is St. Steel which is insulated with glass wool. The unit is fitt...

Idly work Table with 1 under shelf: Made out of St. Steel, 16 Swg with 2 round containers with 1 under shelf. size: 30”x 24”x 34”

Conventional Wet Grinder: Main Bed is made up of Mild steel with painted. Post & arms are made up Mild steel with nickel plated. Body & Drum made up of stainless steel 202 grade. 07 Ltrs Cap

Tilting Wet Grinder: (10 ltr Cap.) Main Bed is made up of Mild steel with painted. Post & arms are made up Mild steel With nickel plated. Body & Drum made up of stainless steel 202 grade.

Four Door Vertical Chiller: Inner and outer body made out of St. Steel. The Freezer will have 4 doors, PUF insulated with Emerson Climate Technology Compressor Size: 48” x 24” x 72”

Work Table with 1 under shelf: Made out of St. Steel, 16 Swg top and 18 Swg 1 under shelf. It will have splash back of 6” Size:46” x 24” x 34” +6”

Work Table with Sink: Made out of 16 Swg along with 1 no. sink with 6” Splash Back. size:46” x 24” x 34” +6”

Storage Rack with 4 Shelf: Made out of St. Steel, 18 Swg with 4 shelves. Size: 46” x 18” x 60” Ht

Pot Rack: Made out of St. Steel round pipe with 3 shelves. size 42” x 24” x 60”

Clean Dish Rack with 4 Shelf: Made out of St. Steel, 18 Swg with 4 shelves. Size: 46” x 18” x 60” Ht

Wall Mounting Shelf : Made out of St. Steel, 18 Swg Size: 66” x 12” x 12”

Three Sink Washing Unit: Made out of St. Steel, 16 Swg with 3 Sink, each Sink.Size: 18”x 18” x 10” deep. Overall Size: 66” x 24” x 34” + 6”

Soiled Dish Landing Table: Dish Landing Table made out of St. Steel 18 Swg with a chute of 8” dia. Size: 46” x 24” x 34” Ht

Work Table with 1 under shelf: Made out of St. Steel, 16 Swg top and 18 Swg 1 under shelf. Size: 60” x 24” x34”

Work Table with 1 under shelf: Made out of St. Steel, 16 Swg top and 18 Swg 1 under shelf. Size: 72” x 24” x34”

Display Tea Coffee Counter: Made out of St. Steel with 2 nos of container and Cup Warmer and burner on one side. The unit will have 1 under shelf and all three-side covered. front Korian design, top g...

Display Cash Counter: Made out of St. Steel. It will have a drawers on one side. The unit will be covered on three-side. front Corian design, top glass with granite. Size:30”x 30” x 48”

Work Table with Sink: Made out of 16 Swg along with 1 no. sink with 6” Splash Back. size:46” x 24” x 34” +6”

L.P.G Line: LPG line drawn with half inch Tata C Class M.S Pipe with all Fittings And accessories

Fume Exhaust System Exhaust Hood: Made out of St. Steel, wall mounting type of the following size: Size: 29 feet x 1’- 6” x 3’- 3”

Grease Filter: Made out of St. Steel, 20 Swg to suit the above hood

Ducting: Made out of G.I 22/24 Swg to suit the site condition Note: The quantity of ducting mentioned is tentative, actual quantity will be known only after installation.

Centrifugal Blower: Centrifugal Blower run with a motor of 5 H.P 1440rpm, 3 Phase supply.

Installation Charges:

Chair Wooden top with M.S leg

4 - Seater Quartz Table (M.S) (with artificial Granite) M.S powder coated leg. Size: 42” x 30” x 30”

Musical Fountain with Laser Show effects And Water Channel Recirculation MEP Works Cross Jet Nozzles: with color lights-1" BSP ,8 mm bore, Brass/Gun metal with adjustable flange, and fast acting solen...

Sunburst jets: with color lights-1" BSP-19 nos of jet nozzles of 6mm bore , connected to a manifold pipe of 50mm MS Pipe ,powder coated with nozzle tappings and collars welded , Brass/Gun metal with a...

Volcano jets: with color lights-1" BSP- 6 nos of jet nozzles of 6mm bore , connected to a Cylindrical Drum pipe of 90mm MS Pipe ,powder coated with nozzle tappings and collars welded , Brass/Gun metal...

Sway jets: with color lights-1" BSP- 1 nos of jet nozzles of 12mm bore , connected to a manifold pipe of 50mm MS Pipe ,powder coated with nozzle tappings and collars welded , Brass/Gun metal with adju...

Vertical High Jets: with color lights-1" BSP- 9 nos of jet nozzles of 18mm bore , cBrass/Gun metal with adjustable flange, RGB controller and fast acting solenoid Valve of 1"( IP68) jet connected with...

Cross High jets: with color lights-1" BSP- 4 nos of jet nozzles of 12mm bore , connected to a manifold pipe of 50mm MS Pipe ,powder coated with nozzle tappings and collars welded , Brass/Gun metal wit...

Revolving Basket jets: with color lights-1" BSP- 6 nos of jet nozzles of 12mm bore , connected to a manifold pipe of 50mm MS Pipe ,powder coated with nozzle tappings and collars welded , Brass/Gun met...

Tower jets: with color lights-1" BSP- 9 nos of jet nozzles of 12mm bore , connected to a manifold pipe of 50mm MS Pipe ,powder coated with nozzle tappings and collars welded , Brass/Gun metal with adj...

Fast Acting Solenoid Valve( IP 68 Standard- Under water type) with water proof coil and connectors- 1" BSP- with noryl diaphram. And under water type coil with water proof connectors. 12v DC

Brass Gate Valve for control- 1" BSP-inner thread type with CI control ring and noryl washer for connection between manifold and nozzles-Gauge of brass should be 16 and above for long lasting performa...

Butter Fly Valve- PVC with flanges and SS 304 Fasteners-6"size- Length of the fasteners shall be 8" of 12mm dia. Butterfly valve should have proper groove for rubber gasket positioning. Make: Aqvastar...

Non Return Valve- PVC with flanges and SS 304 Fasteners-6"size- Length of the fasteners shall be 8" of 12mm dia.Non Return valve should have proper groove for rubber gasket positioning. Make: Aqvastar...

PVC Pipe 10 Kg pressure rated- 300mm dia with necessary Fittings of 10 kg pressure and PVC solvent cement as required for perfect bonding and connection between Submersible pump and Effect Nozzle

PVC Pipe 10 Kg pressure rated- 200mm dia with necessary Fittings of 10 kg pressure and PVC solvent cement as required for perfect bonding and connection between Submersible pump and Effect Nozzle

PVC Pipe 10 Kg pressure rated- 160mm dia with necessary Fittings of 10 kg pressure and PVC solvent cement as required for perfect bonding and connection between Submersible pump and Effect Nozzle

PVC Pipe 10 Kg pressure rated- 110mm dia with necessary Fittings of 10 kg pressure and PVC solvent cement as required for perfect bonding and connection between Submersible pump and Effect Nozzle

PVC Pipe 10 Kg pressure rated- 75mm dia with necessary Fittings of 10 kg pressure and PVC solvent cement as required for perfect bonding and connection between Submersible pump and Effect Nozzle

PVC Pipe 10 Kg pressure rated- 90mm dia with necessary Fittings of 10 kg pressure and PVC solvent cement as required for perfect bonding and connection between Submersible pump and Effect Nozzle

PVC Pipe 10 Kg pressure rated- 63mm dia with necessary Fittings of 10 kg pressure and PVC solvent cement as required for perfect bonding and connection between Submersible pump and Effect Nozzle

PVC Pipe 10 Kg pressure rated- 50mm dia with necessary Fittings of 10 kg pressure and PVC solvent cement as required for perfect bonding and connection between Submersible pump and Effect Nozzle

PVC Pipe 50 Kg pressure rated- 110mm dia with necessary Fittings of 50 kg pressure and PVC solvent cement as required for perfect bonding and connection between Submersible pump and Effect Nozzle

Supply nstallation of 900 Bobbinwound polyester resin glass fibre anti corrosive sand filter, with 2 inch dia 6 way side mounted multiport valve for filtration, backwash, rinsing recirculation and nec...

Filter media- Silica Sand- 0.5mm nominal size mixed with 1mm size gravel Make: Aqvastar- Singapore

6 inch Main Drain cover- ABS , white with anti vortex suction Make: Aqvastar- Singapore

Vacuum point with spring lid - ABS white Make: Aqvastar- Singapore

Adjustable floor / Wall inlets- ABS white with 9000 cum/hr flow rate Make: Aqvastar- Singapore

Supply & installation of centrifugal self priming pump with high hydraulic efficiency, chemical resistant and ultra quiet operation. Each pump integrated along with IP-55 protection- class F continuou...

Floating hose 18 Mtrs- PVC flexible with White ABS connectors- UV treated Make: Aqvastar- Singapore

18inch plastic brush-Make: Aqvastar- Singapore

5inch Algae brush Make: Aqvastar- Singapore

Deep net-ABS Make: Aqvastar- Singapore

8-16 feet Aluminium handle-ABS plastic Make: Aqvastar- Singapore

Vacuum Head with Wheel 12" Make: Aqvastar- Singapore

Test Kit for Pool ID 5 in 1 Certikin/Aqvastar packaged Make: Aqvastar- Singapore

Hydro Shield Projection Water screen (30 m x 20 m) : Hydro Screen Projection Water screen nozzle Radius 16 meters Connection 6 inches’ flange with: Pump Motor Controller unit PVC Sheet for Water Tan...

LED under water type ( IP68) light 12v18W- RGB with 45degree lens, SS 304 body with connecting stand, nozzle mounted type Make: Riege Energy

RGB Controller for lights with power driver-12v 24W mounted on an outdoor panel box of size 600mmx600 mm , powder coated. Make: Riege Energy

Cable for lights- 1.5 Sqmm 4 Core- Make: Polycab

Cable for Pumps- 4 Sqmm 3 Core Make: Polycab

Electrical Conduits 25mm-FRLS Standard- PVC Make: Polycab

Electrical Conduits 32mm-FRLS Standard- PVC Make: Polycab

Water proof type connection gland-25mm Make: Polycab

Silicone Sealent- Water Resistant Type - Momentive

Tulip Jet Nozzle 1.5" with necessary universal ball joints,control valve & 12v18w RGB nozzle mounted LED light with necessary cables, conduits and power driver

Providing & Fixing, testing and commission, of openwell submersible Type Water Transfer Pump, for pumping water from Treated water tank-to Overhead water tank including level switches, control wires ,...

Providing & Fixing, testing and commission, of horizontal/vertical centrifugal monoblock Type Water Transfer Pump, for pumping water from raw water tank to WTP including level switches, control wires ...

Providing & Fixing, testing and commission, of openwell submersible Type Water Transfer Pump, for pumping water from Lake to sump tank including level switches, control wires ,startor etc.The price sh...

Centrifugal self priming Open well submersible pump- 1 HP- with suction strainer - CI body and noryl impeller Type: DOL

Centrifugal self priming Open well submersible pump- 5 HP- with suction strainer - CI body and noryl impeller- Type: DOL- 1250 LPM@ 10 Mtr Head

Centrifugal self priming Open well submersible pump- 7.5 HP- with suction strainer - CI body and noryl impeller- Type : Star Delta 1550 LPM @12 mtr Head

Centrifugal self priming Open well submersible pump- 10 HP- with suction strainer - CI body and noryl impeller Type: Star Delta- 1750 LPM @ 10 Mtr Head

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 15 HP, size 80x65 Head 44M, Discharge 900 LPM

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for: For 80 mm dia GI collar:

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any. For 80 mm dia GI BEND

Supply and delivery at site wrought middle steel (galvanized) GI tee confirming to IS 1239-II, 1991 with latest amendments if any. For 80 mm dia GI TEE

Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any.For 80 mm dia GI collar:

Computer for Projector & Laser Equipment Pro RGB Multicolor Laser Projector 2 Nos 20 Watts Intel Xeon Processor E5 Windows 10 Pro 64 bit 64 GB RAM Quad Channel exp. To 1TB NVIDIA Quadro K6000 3D Card ...

Computer Hardware: Supply of Industrial Grade Media Engine Desktop Server Computer for controlling Laser and Audio system Customised with high performance Video display card to sync with Laser program...

Laser Designer System: Supply of Pangolin LD2000 Professional & Intro Laser Designing and 3D Animation software to control and execute laser shows with License Professional .Net QM2000/FB3/FB4 for Las...

Video Projector : Panasonic/Epson/Christie/Barco HD Video Projector: Supply of 3 D Compatible , 12000 Lumens HD Video Projector with custom Lens All relevant cables and accessories, data convertors Co...

Control system : Completely self-contained lighting playback controller with 512 channels Seamlessly handles static scenes, cross fading and real-time "streaming" DMX playback Web-based "live" operati...

Audio System Multiple driver, full range stackable IP55 rated The transducer complement shall consist of at least eight (8) full range environmental drivers of 11 cm diameter or better, mounted symmet...

Fountain & Pump Control Panel: Supplying, Providing, Fixing, Testing & Commissioning of composite control panel for pump sets made out of 2 mm thick CRC steel duly powder coated having a degree of pro...

Pump Control Panel: Supplying, Providing, Fixing, Testing & Commissioning of composite control panel for pump sets made out of 2 mm thick CRC steel duly powder coated having a degree of protection. Th...

Content, Music & Film:High quality content which can run on Pangolin LD 2000/Beyond software. with video projection. Content should be of 20 minutes duration and should be developed through a good His...

62.5 kVA ,3- Phase OJUS Leyland Diesel Generator set with Standard Control Panel.

Installation: Install, Execute, Commissioning, Training and Testing Laser Show which should include Power Cabling, Data transfer Cabling, Network Cabling with related accessories

Installation: Install, Execute, Commissioning, Training and Testing of water channel Re circulation system

Supply, Installation and fixing of Main Statue & Dr. Vargese Kurian statue made of bronze with 20 feet height with all necessary supports and fixing details, painting and finishes as per vendor specif...

Supply fixing of Ganesha Statue & Shankaracharya statue made of bronze with 10 feet height with all necessary supports and fixing details as per vendor specification and Engineer in charge. Cost inclu...

CLIMBING PEGS (PRICING PER PIECE) " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " The indoor products are all in rotomoulded LLDPE Virgin...

HORSE RIDER Supply and Fixing of Horse Rider : " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached.As per NIUA Guidlines all products must be te...

ELEPHANT RIDER Supply and Fixing of Elephant Rider:" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidlines all products must ...

MERRY GO ROUND - DX Supply and Fixing of Merry Go Round DX: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidlines The Merry...

SEE SAW TWO SEATER-E upply and Fixing of 2 Seater See Saw: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidlines all produc...

Supply and Fixing of Fiero A Swing: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidlines all products must be tested and c...

900MM SINGLE MOUND SLIDE Supply and Fixing of 900MM SINGLE MOUND SLIDE : " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " "As per NIUA Gui...

EUROPA TRIPLET Supply & Fixing of Europa Triplet: "The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "As per NIUA Guidlines all components desi...

HEXA CLIMBER-E Supply and Fixing of Hexa Climber: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidlines all products must b...

VORTEX-E Supply and fixing of childern Multi Play Equipment VORTEX :" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidlines w...

CHALLENGE COURSE - 01 Supply and Fixing of Challenger Course 1: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidlines Uprig...

Add extra 10% for Civil works (Preperation of foundation for the equipments)

Supply, Installation, Testing and Commissioning of Toy Train with capacity 50 Adults and Track with sleepers of length 600m including Transportation,Delivery at site, unloading, with respective feture...

Landscaping Works Clearing of land by cutting of thick and sparse growth plants(0.25 mt thickness plants and clearing of bushes along with roots( throwing away to 1.5mtr height and 50 mtr far)

Trees Digging pits of size 0.75 x 0.75x 0.75m, filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion ofsand (0.035cum) FYM (0.070cum) Red earth (0.105 cum) and planting o...

Shrubs Digging pits of size 0.45x0.45x0.45m filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion of sand (0.007), FYM (0.014cm) redearth (0.021cm) and and planting of we...

Creepers Digging pits of size 0.45x0.45x0.45m filling 50% of the pit with top soil and remaining 50% of pit with 1:2:3 proportion of sand (0.007), FYM(0.014cm) redearth (0.021cm) and planting of well ...

Planting of Ground cover plants Digging of 1.0mx1.0mx0.45m areaa nd filling 50% of the area with top soil and remaining 50% area with 1:2:3 proportion of sand (0.0375cum), FYM(0.075cum) redearth (0.01...

Rose garden/growing of rose plants Digging pits of 0.6x0.6x0.6m size and filling 50% of the pit with top soil and remaining 50% of pit with 1:6:6 proportion of sand(0.008), FYM(0.048cm) redearth(0.048...

Growing of Flower Beds Digging of 1.0mx1.0mx0.45m area and filling 50% of the area with top soil and remaining 50% area with 1:2:3 proportion of sand (0.0375cum), FYM (0.075cum), redearth (0.0112cum) ...

Growing of Flower Beds using corms/bulbs (Cana,Tuberose,Gladiolus etc) Digging of 1.0mx1.0mx0.45m area and filling 50% of the area with top soil and remaining 50% area with 1:2:3 proportion of sand (0...

Growing of Hedges Digging trench of size 1mx0.30mx0.45m and filling 50% of the trench with top soil and remaining 50% trench with 1:2:3 proportion of sand (0.0112), FYM (0.0224cum) redearth (0.0336cum...

Trees (Tabebuia (Pink/Yellow Trumpet), Neem, Silver Oak, Pride of India (Lagerstroemia), Ashoka Tree) - Supply and stacking of planting species - Refer Sheet along side - Horticulture BOQ

Shrubs (Hibiscus, Bougainvillea, Nerium oleander, Duranta erecta, Ixora coccinea) - Supply and stacking of following shrubs of average height 450 mm - 600mm with 5-6 branches in poly bags of size 25 c...

Creepers (Bougainvillea (climber), Aparajita (Clitoria), Madhumalati (Rangoon Creeper), Morning Glory creeper)

Ground covering Plants (Dwarf Asparagus Fern, Alternanthera (Red / Green / Golden) - Supply and stacking of following ground covers of average neight not less than 200mm bushy in 10inch x 10inch as pe...

Supply and stacking of Tulip Plants as per direction of the officer-in-charge.

Supply and stacking of Flower Beds as per direction of the officer-in-charge.

Supply, stacking & Growing of Flower Beds using corms/bulbs (Cana,Tuberose,Gladiolus etc)

Supply, stacking & Growing of Hedges (Acalypha, Duranta, Ficus benjamina)

SCRAPPING AND REMOVING TOP SOIL :-Scrapping the area by removing 0.15m soil and removing of unwanted plants, grass along with roots .25k minitial transport, including lead, lift loading and unloading ...

1ST DIGGING :- Digging of the area for developing lawn including removing weeds, debris if any and breaking of clumps, watering etc. (1x1x0.45mt)

2ND DIGGING:- Digging of soil by removing grass etc if any and levelling of the soil etc .. (1x1x0.45mt)

Procurement of quality red earth/soil and heap around pit (1x1x0.15mt)

Supply of inputs such as sand, FYM, Red earth in 1:3:6 ratio mixing and spreading the mixture to 7.50cm thickness wherever required

Procurement of quality lawn grass - Bermuda Grass - (Turf)

Labour Charges mixing Inputs as per prescribed proportion and quantity and spreading, applying fertilizers, digging, levelling, and dibbling with lawn grass at a spacing of 5cmx5cm & as per the direct...

Lawn development cost - Bermuda Grass - (Turf)

Procurement of Ingredients: Procurement off arm yard manure/compost, sand and red-earth (ingredients) required for raising seedlings inclusive of transportation, breaking of clods, sieving and heaping...

Stone Benches Providing and fixing Stone Benches as per approved drawing and at locations shown by the engineer including transportation to site, all charges of labour, loading and unloading etc., com...

Stone Pergolas (Size - 9x9 feet) - Providing and fixing Stone Pergolas (Size - 9x9 feet) as per approved drawing and at locations shown by the engineer including transportation to site, all charges of...

Stone Bollards (Size - 6”x6”x3 feet) - Providing and fixing Stone Bollards (Size - 6”x6”x3 feet) as per approved drawing and at locations shown by the engineer including transportation to site...

Steel Dustbins - Providing and fixing steel litter bin as per approved drawing and at locations shown by the engineer including transportation to site, all charges of labour, loading and unloading etc...

PIPE WORKS Supply, laying & commissioning in position PVC pipe conforming to IS:4985:2000 and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bend...

PVC pipe 90mm-10 kg/cm²

PVC pipe 75mm-10 kg/cm²

PVC pipe 63mm-06 kg/cm²

PVC pipe 50mm-06 kg/cm²

PVC pipe 40mm-06 kg/cm²

PVC pipe 32mm-10 kg/cm²

PVC pipe 25mm-10 kg/cm²

Earth work excavation and refilling (300mm* 300mm)

DRIP & ACCESSORIES Supply, Fixing & Commissioning of flexible 16mm inline tubing PC Drippers with pressure compensating, self flushing mechanism, resistance to UV damage, algae growth brown in colour,...

Supply,Fixing & commissioning of 2" Large Capacity Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25 meter cube pe...

Supply,Fixing & commissioning of 1.5" Large Capacity Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25 meter cube ...

Supply,Fixing & commissioning of 1" Large Capacity Y Type Disc / Screen Filters for submain filteration Have High Flow & Low Maintenance With a Solid Build,Maximum Flow Up to 110 gpm (25meter cube per...

Supply,Fixing & commissioning of 40mm dia self-closing flushing valves that are installed at the end of the irrigation line for effecting flushing of the line at the beginning of every irrigation cycl...

Supply,Fixing & commissioning of STAKE Comes Sharp tips provide easy insertion into all soil types, Staple Distribution Tubing , XF Drip Line or XBS Tubing to Finished Grade. Notched Sides. etc., comp...

SPRINKLERS & ACCESSORIES Supply,Fixing & commissioning of Pop up spray head Spray bodies, With 14A nozzles (VAN NOZZLES) and two piece stem ratchet (0 to 360 degrees) Arc adjustable nozzle capable of ...

Supply,Fixing & commissioning of Pop up spray head Spray bodies, With 24A nozzles (VAN NOZZLES) and two piece stem ratchet (0 to 360 degrees) Arc adjustable nozzle capable of covering 0.9-5.5m at 1.0-...

Supply,Fixing & commissioning of Rotor pop up sprinkler full/part circle having radius of 6.7m - 12m @ 2.5 - 4.5 bar with discharge of 0.09 - 0.61 ltr./sec. the sprinklers having Arc Adjust thru Top C...

Supply,Fixing & commissioning of 1/2" Pop up Connecting Swing joint Assembly , 12" Length . The tubing shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at ...

Supply,Fixing & commissioning of 3/4" Pop up Connecting Swing joint Assembly , 12" Length . The tubing shall be made of polyetylene having wall thickness of 2.3mm ,a working pressure of 5.5 kg/cm2 at ...

Supply,Fixing & commissioning of Imported HDPE service saddle of varying size upto 90mm dia with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect/Engin...

VALVES & ACCESSORIES Supply,Fixing & commissioning of PVC Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem, Stem O-Ring, non mechanical ,ball Seals w...

Supply,Fixing & commissioning of PVC Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem, Stem O-Ring, non mechanical ,ball Seals with backing seals and...

Supply,Fixing & commissioning of PVC Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem, Stem O-Ring, non mechanical ,ball Seals with backing seals and...

Supply,Fixing & commissioning of a double acting air and vaccum release 2" Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line. The wo...

Supply,Fixing & commissioning of a double acting air and vaccum release 1" Air release valve . The Air release valve shall be capable of both releasing and admitting air from and into the line. The wo...

Supply,Fixing & commissioning of 6"Round box with greenlid with features Snap-in overlapping lid, Skid-resistant lid texture,, Body built with three ridges for additional support to sidewallst & Havin...

Supply,Fixing & commissioning of 10" Round Valve Box with greenlid with features of Overlapping lid with bolt hole and twist lock, Skid-resistant lid texture, Body built with double ridges for additio...

Supply,Fixing & commissioning of 12" Rectangular Standard Valve Box features, Drop-in lockable lid, Skid-resistant lid texture, Double ledge lid support, Ridge adds additional support to sidewalls & h...

Supply,Fixing & commissioning of 18'' Jumbo Rectangular Standard Valve Box with greenlid and corrugated structure with unique shovel access slot and bolt hole knockout & having Dimensions @ Top Openin...

Supply,Fixing & commissioning of 3/4th inch Quick coupling valve made up of solid brass with locking cover corrosion resistant and stainless steel spring etc., complete, as per the instructions of Arc...

Supply,Fixing & commissioning of 3/4th inch Key threads into top of QCV to provide water access etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. ECO AQUA/ X...

Supply,Fixing & commissioning of 3/4th inch Hose Swivel Made up of Solid Brass Swivels up to 360 degrees to allows hose to be pulled in any direction & Also to prevent Hose Damage etc., complete, as p...

Supply,Fixing & commissioning of Imported HDPE service saddle of varying size (75mm to 110mm dia) with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Architect...

FILTRATION UNIT Supply,Fixing & commissioning of 3" Disc Filter with capacity 30m3/Hr having an suitable inlet connections , to create a helical effect in the incoming water ,spinning particulate in s...

Supply,Fixing & commissioning of Pressure Guage etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. ISI make

PUMPING UNIT Supply,Fixing & commissioning of Openwell Submersible pumpset of having discharge and head of design flow , UPVC sch 40 - suction & delivery manifold and mounted on a baseframe with prope...

Supply,Fixing & commissioning of control panel suitable for pumpset having panel box made of CRCA sheet of 2 mm thickness and fixed alongwith following accessories Starter),start / stop push buttons ,...

Supply,Fixing & commissioning of 3'' control Valve, Butterfly Valve VAN Stone flange & Tail Piece in mainline for bypass and flow diversion of approved quality with pressure rating of PN 10 etc., comp...

Supply ,Fixing & Commissioning of Control Cable for Pump Set - 3 core X 4 / 6 Sq.mm Copper cable based on the pump capacity Finolex /Polycab make

Supply ,Fixing,Commissioning of 3'' Non Return Valve to prevent back flow have flap type or spring type with pressure rating of PN 10 etc., complete, as per the instructions of Architect/Landscape Arc...

Supply,Fixing & commissioning of Pressure release valve 2" with pressure setting from 0 to 7 Bar etc., complete, as per the instructions of Architect/Landscape Architect/Engineer In Charge. Armas/ Xer...

AUTOMATION EQUIPMENTS Supply,Fixing & Commissioning of Direct burial 14 Awg x 2 Maxi cable with PVC insulated UL stndard 493 with impregnated polyethene jacket and soft annealed tin coated copper conf...

Supply,Fixing & Commissioning of PVC pipe 25mm-10 kg/cm² including fittings and accessories Finolex make

Supply,Fixing & commissioning Of Two wire control system ICC2 Hunter Controller having solenoid and decoder in one unit as interface & Maximum Two Wire Connectors Between Communication Cable and Solen...

Supply,Fixing & Commissioning of EZ 1 Single Station Decoder to connect the valves to the controller) which provides two-way communication between the valve and controller to provide advanced diagnost...

Supply,Fixing & commissioning of 2" Solenoid globe angle inlet Valves with provision to DC Latched interface module, fabric reinforced Nitrile diaphram Material and rugged PVC construction ,compatible...

Supply,Fixing & commissioning of 1.5" Solenoid globe angle inlet Valves with provision to DC Latched interface module, fabric reinforced Nitrile diaphram Material and rugged PVC construction ,compatib...

Supply,Fixing & commissioning of 1" Solenoid globe angle inlet Valves with provision to DC Latched interface module, fabric reinforced Nitrile diaphram Material and rugged PVC construction ,compatible...

Supply,Fixing & commissioning of ACCU SYNC to Maintain constant outlet pressure between 1.04 to6.9 KSC HUNTER make

Supply,Fixing & commissioning of direct bury -on wire connector with strain relief ,UL486 D certified ,with waterproof silicon sealant ,fits wire from 22ga to6 ga as per specifications complete DBRY H...

Supply,Fixing & commissioning of automatic rain shut off device ,latching hinge with multiple rainfall settings 5mm to 20mm UL CUL listed and CE approved complete HUNTER make

Supply,Fixing & commissioning of UPS ZEBRONICS, Stabilizer 300watts & pump relay set as per specifications complete PSA

FIRE FIGHTING & RELATED WORKS : PUMP ROOM : Supply, erection, testing & commissioning of electrical motor driven end suction back pull out centrifugal pump capable of delivering,adequate LPM at requir...

Supply, installation, testing & commissioning of diesel engine driven pump, horizontal mounted, Horizontal spiltcase centrifugal single stage pump, capable of delivering required flow at required head...

Supply, Installation, testing and commisioning electrically driven jockey pump of capacity 180.0 Lpm at required head end suction type bronze impeller pump oupled to electrical driven motor with suita...

Supplying Installing testing and commissiong COMMON Control panel for fire fighting system consiting of electrical motor driven 60HP Main fire pump, Diesel engine driven pump 60 HP Sprinkler pump 50HP...

Supplying, Installing testing & commissioning approved make Centrifugal pump end suction type coupled to Electric motor of suitable HP, fitted on a commonbase frame and rated for Fire duty. The quated...

Supplying Installing testing and commission of Electrical Booster pump Control panel for fire fighting system consisting of Feeder For 1 No. of Booster pumps :-1 no of 32 A TPN MCCB (50 KA with 12.5 H...

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of followi...

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of followi...

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of followi...

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13039 of followi...

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :200 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80 mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.200mm ...

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.100mm ...

Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal whee...

Supply, installing, diesel tank for diese engine 200lit cap

Pressure guage of 150 mm dia including Isolation Valve and forged siphon Tube including with all accssories as per IS:Spec.

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

3 Core x 1.5Sqmm for Pressure Switch

Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. (150 AH capacity)

Supplying and installing following size of perforated painted with powder cating m.s. cable trays with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from th...

Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete

SITC of Gun metal BALL VALVE SIZE OF 25mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges ne...

SITC of Gun metal BALL VALVE SIZE OF 19/20 mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charge...

Fire Hydrant & Sprinkler System : Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions,Flanger, ...

Wraping and Galing of U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete ...

Wraping and Galing of U/G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth. including cost of materials, labour, usage charges of machinery complete ...

Supplying, installing , testing and commissioning approved make CI butterfly valves of 150mm diameter confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc., complete as per speci...

Supplying, installing , testing and commissioning approved make CI butterfly valves of 100mm diameter confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc., complete as per speci...

Supplying, installing , testing and commissioning approved make CI butterfly valves of 50mm diameter confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc., complete as per specif...

Providing & fixing Flow Switch in following sizes M.S. pipe including connnection etc as required.150mm dia

Providing, fixing, testing & commissioning ofinstallation control valve of cast iron body,brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm andhydraulically ...

Supplying Installing, testing and commissioning of 150mm dia 4 way Fire brigade inlet connection with Non retrn valve of 4 nos. 63 mm dia. including cost of materials, labour, usage charges of machine...

Supplying Installing, testing and commissioning of 100mm dia 2 way Fire brigade inlet connection of 2 nos. 63 mm dia. including cost of materials, labour, usage charges of machinery complete as per sp...

FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve,spindle and cast iron hand wheel. It has a female ...

Supplying Installing, testing and commissioning of Reinforced Rubber Lined 2nos .RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal cou...

Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour,usage charges of machinery complete as pe...

Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at out...

Supplying and fixing of Fire duct Shutter fabricated out of M.S.sheet and frame, door shall befixed with 4 mm thick Glass, suitable Rubber beading and Locking arrangement. Rate shall be includes all f...

Supplying Installing, of M.S. Pressed reel of 600mm dia swinging type motion which allows a 180degree swing and conforms to IS:884/85 or Aluminium fitting Single Piece Compact Type. including cost of ...

Supplying Installing, testing and commissioning of 19mm dia 40.0m length hose with rubber lining smooth bore, reinforced of natural/synthetic fibres, a rubber cover finish shall be smooth, fluted or f...

Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. complete

SITC of Gun metal BALL VALVE SIZE OF 25mm dia ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges ne...

Providing of core cutting 50mm to 200mm dia Including all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convene of all material ...

Supplying Installing, testing and commissioning of approved make 15mm dia sprinkler bulb pendent/wall mounted type designed to operate 68 degrees centegrad Make Tyco/HD FIRE complete (Colour code of b...

Supply, Erection, Testing & commissioning of MS Forged Tees & Collar ---- etc., complete as per specificaiton with all lead and lift and as per directions of the Engineer-in-charge of the work : Socke...

Socket Elbow 25/25

Socket Tee 25/15/25

Socket Tee 32/15/32

Socket Tee 40/15/40

Forged Collar 25/15

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

FIRE EXTINGUSHERS & SIGN BOARD : Providing Aqueous Film-Forming Foam - 9 Ltr Providing 9 Ltr Fire Extinugisher Aqueous Film-Forming Foam Type, Stored Pressure Type, Pressure Gauge, Gross Weight 15.1Ok...

Supply, installation in position, testing and commissioning of 4.5Kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg....

Providing Water Mist 4 Kg CO2 Gas Type Fire Extinguisher, used Unused Mechanism, Squeeze Grip , Gross Weight 9.1 Kg. empty Weight 7.1 Kg. Can Height 600MM Diameter 108MM, Discharge Time less than 8 Se...

Supplying of two bucket stand alongwith buckets. complete

Providing and fixing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board, complete ...

ACTION BY SECURITY/RECEPTION UPON RECEIPT OF INFORMATION THROUGH FIRE ALARM OR FIRE DETECTORS OR BY USING PUBLIC ADDRESS SYSTEM. A) ALERT THE OCCUPANTS BY USING PUBLIC ADDRESS SYSTEM. B) INFORM FIRE C...

Providings Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, n...

TWO WAY TACK BACK & PA SYSTEM : Supply installation testing commissioning of P.A System Rack made out of 18 gauge M.S. Sheet with glass door with locking arrangement and powder coating grey paint two ...

Supplying Installing, testing and commissioning of MIKE

Supplying Installing, testing and commissioning of Public address system (Two way comminication type) as per requirement of Fire Force authority and which Generally comprise of Supplying Installing, t...

FIRE ALARM SYSTEM : Supply, intallation, testing and Commissioning of Graphical software for entire fire alarm panels including detector configuration, commissioning etc

Supply, Installation , Testing & Commissioning  of Network Active Repeater Panel with 1500 Character / 240X64 Pixel / 7inch Touchscreen. The LCD shall Display all events / detectors, devices status o...

Supply, intallation, testing and Commissioning of loop card ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work.

Supply, installation, testing and commissioning of analogue addressable Smoke Sensor detector and standard base (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be pr...

Supply, Installation, Testing & Commissioning of Analogue Addressable loop powered Sounder & Beacon  with inbuilt isolator and  having Min 15 distinct sound patterns/ multitone to indicate Exit door...

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.100 x 75 x 65 mm

PUBLIC ADDRESS SYSTEM : Supply installation testing commissioning of P.A System Rack made out of 18 gauge M.S. Sheet with glass door with locking arrangement and powder coating grey paint two coats at...