Construction and Repairing of O.T Section of Sub District Hospital at Kralpora Kupwara.

Amount

P/F of 15mm cement plaster in 1:6 mix.

P/L Cement concrete plain cement concrete flooring 50 mm thick in 1:2:4 ratio. Crushed aggregates above plinth .

P/L of vitrified tiles in floor with different sizes(Thickness to be specified by the manufacturer ) with water absorption less than 0.08% and confirming to IS:15622 of approved make, in all colours and shades laid on 20mm thick cement mortar 1:4 including grouting the joints with white cement and matching pigments etc complete.

P/L of vitrified tiles in walls with different sizes(Thickness to be specified by the manufacturer ) with water absorption less than 0.08% and confirming to IS:15622 of approved make, in all colours and shades laid on 20mm thick cement mortar 1:4 including grouting the joints with white cement and matching pigments etc complete.

P/L of flooring with marble stone of specified thickness over 20mm thick base of cement mortar1:4 laid and jointed with grey cement slurry including rubbing , polishing and curing complete with plain marble Including nosing etc complete(18-20 mm thick )

P/L of flamed finish Granite stone in required design and patterns in skirting over 20mm (average) thick base of cement mortar 1:4 laid and jointed with cement slurry and pigment of matching shade including rubbing, curing, and polishing etc. all comlete.

P/A of white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall/damaged surface to prepare the surface even and smooth complete.

P/A of two or more coats of interior excel emulsion , of approved brand and manufacturer, over the walls/ceiling , use of sand papering needs to be done before applying excel emulsion complete to achieve smooth surface and even shade as per the directions of engineer incharge .

Providing and fixing in position collapsible steel Gate with vertical channels and braced with flat iron diagonals , with top and bottom rail of T-iron , with steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer complete job( as per engineer in charge ) .

Providing and fixing ISI marked flush door shutters , comprising of ply wood board and well matched MICA sheet over it , With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws

Providing and fixing glazed shutters for windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. ( first class deodar wood.) thickness 30 mm

P/F of ISI marked oxidized M.S Tower bolts with nuts and screws etc. complete

100mmx10mm

200mm x 10mm

P/F of ISI marked oxidized M.S door latches confirming to IS:5930 with screws etc. complete.

300 mm x 20mmx6mm

200 mm x20mmx6mm

P/F of ISI marked oxidized M.S handles confirming to IS:4992 with screws etc. complete

P/F of isi marked hooks.: 100mm

P/F of door stopper

P/F of 4mm thick Float Glass panes in door shutters/windows .

P/A a coat of wood primer having v.o.c content less than 50grm/ltr. Of (asian, berger or narolac) including sand papering etc complete job .

P /A two or more coats of synthetic paint of approved brand including all charges .

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in superstructure above plinth level in cement mortar 1:6 mix

P/F G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc.

P/F PVC pipes for sanitary purposes incl all charges incl related fixtures i.e. tees, sockets, elbows etc. of approved make and brand

P/F of ISI marked C.P bath fittings and other accessories incl all charges complete.

Electric Gyser 50 ltr.

C.P angle value

SS Gratings

towel rods

mirrors

S.S Soap case

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

double groove

single groove

Providing and fixing 5 mm thick ACP board in panelling fixed in aluminum doors, windows , shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. (With partly floating glass panes of 4.0 mm thickness)

P/F of double swing ACP doors of required size including all necessary fittings ,double swing hinges etc complete job as per the directions of engineer .

P/F of stainless steel (SS-304) surgical scrub station(1400x550x840mm) ISI marked with all necessary fittings including carriage complete job.

Clearance of muck , surface and removal of stains using stain removal chemical and scrubbing etc complete.

REYAZ AHMAD KHAN

hilal ahmad tantary

M/S MOHAMMAD SYED PIR