Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.4 LAccepted-AOC 29 MODEL TOWN BEHIND GURUDWARA PATHANKOT | PATHANKOT | PATHANKOT | PUNJAB | 145001 | ₹45.4 L Quoted ₹47.2 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹47.5 L+₹32,460 (0.69%)Rejected-Finance 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | ₹47.5 L+₹32,460 (0.69%) | L2 | Rejected-Finance Being other than L1 |
| 3 | L3₹50.2 L+₹3.0 L (6.34%)Rejected-Finance 195 MAHESH NAGAR AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | ₹50.2 L+₹3.0 L (6.34%) | L3 | Rejected-Finance Being other than L1 |
| Sl No | Description | Qty | Unit | kailu construction co L1 | Raman Electric Trading Co L3 | M/s Vijay Construction Co. L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI type tested) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mm x 50mmx6mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 1000 amps (03 Nos 1000 Amps for Phase and 01 No 500 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge.
Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate. | 1 | Each Job | 3,25,000 ₹3,25,000 | 3,60,000 ₹3,60,000 | 2,50,000 ₹2,50,000 Lowest |
| 1.01(a) Incoming (i) ACB 04 Pole 50 kA, 630 Amp,415 Volts, fixed thermal & magnetic release (Qty 01 No). | ||||||
| 1.02(b) Out goings (i) MCCB 04 Pole 36 KA, 400 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 01 Nos) (ii) MCCB 04 Pole 36 KA, 315 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 01 Nos) (iii) MCCB 04 Pole 26 KA, 200 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 02 Nos) (iv) MCB TPN 10 KA, 63 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 01 Nos) (v) Aluminium bus bar suitable size 3 phase, 4 wire 1000 Amp,415 V, duly insulated - set of 4 (vi) Digital Volt meter 0-500V with slector switch. (vii) Digital Amp meter 0-600 amp with CT and selector switch. (viii) Indicating lamp (RYB)LED Type - set of 3 | ||||||
| 2.00 | Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI type tested) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mmx50mmx6mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 800 amps (03 Nos 800 Amps for Phase and 01 No 400 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge.
Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate. | 1 | Each Job | 1,80,000 ₹1,80,000 Lowest | 1,95,000 ₹1,95,000 | 2,50,000 ₹2,50,000 |
| 2.01(a) Incoming (i) MCCB 04 Pole 36 kA, 500 Amp,415 Volts, fixed thermal & magnetic release (Qty 01 No). | ||||||
| 2.02(b) Out goings (i) MCCB 04 Pole 25 KA, 315 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 03 Nos) (ii) MCCB 04 Pole 16 KA, 160 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 01 Nos) (iii) MCB TPN 10 KA, 16 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 01 Nos) (iv) Aluminium bus bar suitable size 3 phase, 4 wire 800 Amp,415 V, duly insulated - set of 4 (v) Digital Volt meter 0-500V with slector switch. (vi) Digital Amp meter 0-500 amp with CT and selector switch. (vii) Indicating lamp (RYB)LED Type - set of 3 | ||||||
| 3.00 | Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI type tested) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mmx50mmx6mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 600 Amps (03 Nos 600 Amp for Phase and 01 No 300 Amp for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge.
Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication. (iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate. | 2 | Each Job | 1,49,000 ₹2,98,000 Lowest | 1,70,000 ₹3,40,000 | 2,30,000 ₹4,60,000 |
| 3.01(a) Incoming (i) MCCB 04 Pole 36 KA, 400 Amp,415 Volts, fixed thermal & magnetic release (Qty 01 No). | ||||||
| 3.02(b) Out goings (i) MCCB 04 Pole 16 KA, 100 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 08 Nos) (ii) MCB TPN 10 KA, 16 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 01 Nos) (iii) Aluminium bus bar suitable size 3 phase, 4 wire 600 Amp, 415 V, duly insulated - set of 4 (iv) Digital Volt meter 0-500V with slector switch. (v) Digital Amp meter 0-400 amp with CT and selector switch. (vi) Indicating lamp (RYB)LED Type - set of 3 | ||||||
| 4.00 | Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI type tested) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mmx50mmx6mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 500 amps (03 Nos 500 Amps for Phase and 01 No 250 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge.
Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate. | 2 | Each Job | 2,86,000 ₹5,72,000 | 2,10,000 ₹4,20,000 | 2,00,000 ₹4,00,000 Lowest |
Tender Value
₹47.7 L
EMD Value
₹95,340
Closing Date
21 May 2026, 6:00 pmClosed
GE NAMS
GE NAMS Amritsar
SPL REPAIR /REPLACEMENT TO LT OH LINES TO UG CABLE WITH ALLIED WKS AT CERTAIN MD ACCN IN PALERAM ENCLAVE AT NAMS
2026_MES_762985_1
GE NAMS-39/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE NAMS
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE NAMS
₹95,340
28 Jul 2026
30 Apr 2026
23 May 2026
30 Apr 2026
21 May 2026
14 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI type tested) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mm x 50mmx6mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 1000 amps (03 Nos 1000 Amps for Phase and 01 No 500 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge.
Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate. | 1 | Each Job | - | - |
| 1.01 | (a) Incoming
(i) ACB 04 Pole 50 kA, 630 Amp,415 Volts, fixed thermal & magnetic release (Qty 01 No). | - | - | - | - |
| 1.02 | (b) Out goings
(i) MCCB 04 Pole 36 KA, 400 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 01 Nos)
(ii) MCCB 04 Pole 36 KA, 315 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 01 Nos)
(iii) MCCB 04 Pole 26 KA, 200 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 02 Nos)
(iv) MCB TPN 10 KA, 63 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 01 Nos)
(v) Aluminium bus bar suitable size 3 phase, 4 wire 1000 Amp,415 V, duly insulated - set of 4
(vi) Digital Volt meter 0-500V with slector switch.
(vii) Digital Amp meter 0-600 amp with CT and selector switch.
(viii) Indicating lamp (RYB)LED Type - set of 3 | - | - | - | - |
| 2 | Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI type tested) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mmx50mmx6mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 800 amps (03 Nos 800 Amps for Phase and 01 No 400 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge.
Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate. | 1 | Each Job | - | - |
| 2.01 | (a) Incoming
(i) MCCB 04 Pole 36 kA, 500 Amp,415 Volts, fixed thermal & magnetic release (Qty 01 No). | - | - | - | - |
| 2.02 | (b) Out goings
(i) MCCB 04 Pole 25 KA, 315 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 03 Nos)
(ii) MCCB 04 Pole 16 KA, 160 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 01 Nos)
(iii) MCB TPN 10 KA, 16 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 01 Nos)
(iv) Aluminium bus bar suitable size 3 phase, 4 wire 800 Amp,415 V, duly insulated - set of 4
(v) Digital Volt meter 0-500V with slector switch.
(vi) Digital Amp meter 0-500 amp with CT and selector switch.
(vii) Indicating lamp (RYB)LED Type - set of 3 | - | - | - | - |
| 3 | Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI type tested) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mmx50mmx6mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 800 amps (03 Nos 800 Amps for Phase and 01 No 400 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge.
Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication. (iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate. | 2 | Each Job | - | - |
| 3.01 | (a) Incoming
(i) ACB 04 Pole 50 kA, 630 Amp,415 Volts, fixed thermal & magnetic release (Qty 01 No). | - | - | - | - |
| 3.02 | (b) Out goings
(i) MCCB 04 Pole 16 KA, 100 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 08 Nos)
(ii) MCB TPN 10 KA, 16 Amp, 415 Volts, fixed thermal & magnetic release (Qty - 01 Nos)
(iii) Aluminium bus bar suitable size 3 phase, 4 wire 500 Amp, 415 V, duly insulated - set of 4
(iv) Digital Volt meter 0-500V with slector switch.
(v) Digital Amp meter 0-400 amp with CT and selector switch.
(vi) Indicating lamp (RYB)LED Type - set of 3 | - | - | - | - |
| 4 | Supply, installation, fabrication, testing and commissioning of new LT Panel board, (CPRI type tested) Factory made cubical type, Outdoor type, floor mounted, factory made out of 50mmx50mmx6mm angle iron frame and 3.15mm inner CRCA steel sheet side covers with front and back hinged doors with proper locking arrangement, rubber gasket on front and back to make it dust and vermin proof, powder coated including suitable rated aluminium bus bar sleeved with heat shrink sleeve colour coated for 3 Phase, 4 wire electric supply system and wiring with suitable size of 500 amps (03 Nos 500 Amps for Phase and 01 No 250 Amps for neutral) rated aluminium bus bar complete powder coated paint with and providing necessary foundation/plateform of the feeder pillar and provision for incoming and outgoing cable, cable gland, replacement of lugs for existing cables as per site requirement and proper finshing as per existing surface complete all as specified and directed by Engr- in- Charge.
Note : (i) The quoted rate shall be of all inclusive.(ii) Drawing for LT feeder piller box shall be got approved by GE before fabrication.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate. | 2 | Each Job | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
BOQ_854655.xls
BOQ • 8.35 MB
39T.pdf
Tender Documents • 1.21 MB
39BOQA.pdf
PDF • 0.31 MB
39DA.pdf
PDF • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .