Construction of 68.00 mtr span steel truss bridge over Hikam on Choli Nalaah on Choli Quarsi road Km 0/000 to 8/890 in District Chamba HP SH Construction of 68.00 mtr span steel truss bridge including both side approaches

Amount

Earth work in excavation for all type of bridge structure in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling/wedging out rocks (Where blasting is prohibited) as per drawings and Morth technical specification clause 304 and as per direction of the Engineer- In–Charge by mechanical means /manual including setting out, construction of shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fiffty millimetres) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantam of water including cleaning of slush which may arrise out during dewatering as per direction of Engineer-In-Charge. Including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, Makana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and virbrated plain cement concrete in open foundation for all type of road / bridge structure using of plain cement concrete grade M-10 (M Ten) nominal mix 1: 3: 6 ( One cement isto Three sand isto Six graded crushed/broken stone aggregate 40mm (forty millimeter) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work in road work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying plain/reinforced cement concrete in M-20 (M-Twenty) designed mix with minimum cement contents @347 Kg (Three hundred forty seven kilograms) per cubic metres with 20mm (Twenty millimeters) nomonal size crushed stone aggregate (extra cement as per design mix above the minimum cement contents specified shall not be paid extra) in sub structure of culverts, bridges as per drawings and MORTH technical specification clause 1500, 1700 and 2200 including form work and curing complete and as directed by the Engineer-In-Charge including carriage of material within all leads, lifts, height and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and M.O.R.D. technical specifications section 1200 and 1600 and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying 100mm (one Hundred ten millimetre) diametre with working pressure not less than 4.000 kg/ cm2 (four point zero kilogram per centimetre square) ISI marked PVC pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V):20(H)(One vertical isto Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700 and 1200 and as per direction of Engineer-In-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in super structure of bridge work complete as per drawing and MORTH technical specifications section 1600 and 2300 including cutting, bending, binding, straightening and placing in position complete in all respect including cost of binding wire upto all height and depth as directed by the Engineer-In-Charge including carriage of material within all leads, lifts, height and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level cast steel rocker bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Morth Technical Specifications. and as directed by the Engineer-In-Charge including carriage of material within all leads, lifts, height and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Supplying, fitting and fixing in position true to line and level forged steel roller bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications 2000, 1000 & 2200 complete including all accessories as per drawing and Morth Technical Specifications and as directed by the Engineer-In-Charge including carriage of material within all leads, lifts, height and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 ( M-Thirty) for RCC culvert and bridge work design mix with minimum cement contents @ 406 Kg (Four hundred six kilograms) per cubic metres with 20mm (Twenty millimeters) nominal size crushed stone aggregate (extra cement as per design mix above the minimum cement contents specified shall not be paid extra) and curing complete in bed block, dirt wall, sub structure including cost of form work and reinforcement complete with bending, binding and placing of bars in position and cost of binding wire as per drawings and MORTH technical specification clause 1500, 1600, 1700 and 2200 as directed by the Engineer-In-Charge including carriage of material within all leads, lifts, height and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in sub structure of bridge work complete as per drawing and MORTH technical specifications section 1600 and 2200 including cutting, bending, binding, straightening and placing in position complete in all respect including cost of binding wire upto all height and depth as directed by the Engineer-In-Charge including carriage of material within all leads, lifts, height and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-thirty) designed mix with cement contents not less than 407 Kgs(Four hundred seven kilograms) per cubic metre with 20mm(Twenty milimetres) nominal size graded crushed stone aggregate (extra cement as per design mix above the minimum cement contents specified shall not be paid extra) in approach slab including cost of form work and reinforcement complete as per drawings and MORD technical specifications section 800, 900, 1000 & 1400 and as directed by the Engineer-In-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing drainage spouts complete with 100mm ( one hundred millimeter) dia galvanised mild steel down pipe corrosion resistant structural steel grating complete as per drawing and Morth technical specifications clause 2705and as per the direction of Engineer-in- Charge including carriage of materials within all leads , lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST and other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and M.O.R.D. technical specification section 800, 900 and 1400 using Reinforced Cement Concrete grade M-40 (M-forty) designed mix with minimum cement contents not less than 470 Kgs (Four hundred seventy kilograms) per cubic metre with 20mm (Twenty milimetres) nominal size graded crushed stone aggregate and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in deck slab etcetera including carriage of material within all leads, lifts and other incidental, as per the directions of the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying 50mm ( fifty millimetre ) thick mastic asphalt wearing course on top of deck slab excluding priming coat with paving grade bitumen meeting the requirement given in table 500-29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface including proving antiskid surface with bitumen precoated fine grained hard stone chipping of 9.5mm (nine decimal five millimetre) nominal size at the rate of 0.005 cum (zero decimal zero zero five) cubic metres per 10 Sqm (ten square metre) and at an approximate spacing of 10cm (ten centimetre) center to centre in both direction pressed into surface when the temperature of surafces not less than 100 (one hundred) deg. centigrate protruding 1mm 4mm (one millimetre) to 4mm (four millimetre) thick over mastic surfaces all complete as per clause 516 including carriage of material within all leads, lifts and other incidental, as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Steel work rivetted in built up sections including cutting, hoisting, fixing, in position and applying a priming coat of red lead paint, in trussed steel bridges complete, including all accessories, as per drawing and Technical Specifications and as directed by the Engineer-In-Charge, including carriage of material within all leads, lifts, height and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing in position pipe railing consisting of IS Rolled steel joist posts designation IS MB 100 (one hundred) (100x75) (one hundred into seventy five) at 2.5 m (two decimal five metre) interval and three rows of 50 mm dia (fifty millimetre diametre) steel pipes (light) including fixing in position on bridge deck complete as per drawing and technical specifications Clause 1208.2 and as per the entire satisfaction and as directed by the Engineer-In-Charge including carriage of material within all leads, lifts, height and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701 and as per the entire satisfaction and as directed by the Engineer-In-Charge including carriage of material within all leads, lifts, height and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete M-15 (M-Fifteen) grade design mix with cement contents not less than 275 Kgs(two hundred seventy five kilogram) per cubic metre with 40mm ( forty milimetre) nominal size graded crushed stone aggregate in levelling course below approach slab complete including cost of form work and curing complete as per drawing and MORD technical specifications section 800, 900 and 1200 as per the directions of the Engineer-In-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying burried expansion joint, expansion gap being 20mm (Twenty milimetres) covered with 12mm (Twelve milimetres) thick, 200mm (Two hundred milimetres) wide galvanised weldable structural steel plate as per IS: 2062, placed symmetrical to centre line of the joint, resting freely over the top surface of the deck concrete, welding of 8mm (Eight milimetres) diametres 100mm (One hundred milimetres) long galvanised nails spaced 300mm (Three hundred milimetres) centre to centre along the centre line of the plate, all as specified in clause 2606 MORTH technical specifications and as per the direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government.

Providing and filling joint ceiling compound as per drawing and M.O.R.D. technical specifications clause 1207.2.2 with coarse sand and 6% ( Six percent) bitumen by weight complete in all respect as per the direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying in position 20mm (Twenty milimetres) thick pre-moulded joint filler in expansion joint for fixed ends of simply supported spans covered with sealant complete as per drawing and Morth . technical specifications clause 2604 complete in all respect as per the direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

SAI SHAKTI SOLUTIONS LLP