Repairs to garages, compound wall, Gates of Offrs Md Accn, sanitary fittings and internal water supply to certain bldgs at Bhusawal Mil Stn under GE(S) Ahmednagar

Amount

Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above ground level) all as specified and as directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking out shutter from the frame) area n.exc 1.5 sqm each all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

Dismantling of AC sheets (corrugated, semicorrugated etc) as in roof covering including ridges all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and as directed.

Taking down 15mm bore steel tubing and connections including cleaning for refixing pipe etc. all as specified and as directed.

Taking down 20mm bore steel tubing and connections including cleaning for refixing pipe etc. all as specified and as directed.

M&L for PCC, 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC, 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for RCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in footing, foundation, plinth beams, bases for columns and mass concrete etc all as specified and as directed.

M&L for RCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in columns, Pillars, Piers, Posts and struts etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan, exc. 6 metre mean radius, built in cement mortar (1:6) all as specified and as directed.

Use and waste formwork to sides of concrete in foundations, footings, bases of columns, side and soffits of plinth beam and simillar work for rough finished surfaces of concrete all as specified and as directed.

Use & waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick [stile] consisting of a frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC steel strip of 20mm width stack inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawings all as specified and as directed.

S&F 100mm size butt hinges, medium weight, colled rolled, mild steel and fixed complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type anodised and fixed complete all as specified and as directed.

S&F 150mm size aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp, staple and fixing clip of sheet cast or extruded section and fixing bolt and sliding bolt complete all as specified and as directed.

S&F tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stanless steel staple to wooden/steel frames all as specified and as directed.

S&F in repairs, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel staples to wooden/steel frames all as specified and as directed.

S&F rolled mild steel sections conforming to Fe 410 -W (GdeE- 250) quality A as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates all as specified and as directed.

S&F mild steel work as in wind ties for roof including securing bolts complete including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde-E-165 all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed

S&F mild steel rag or lewis bolts 12mm dia, screwed one end with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n.exc 15cm long all as specified and as directed.

M&L for mild steel framed work conforming to Fe 410 -W (GdeE- 250) quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing all as specified and as directed.

S&F mild steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and /or riveted or forged in to spikes, framed guard bars for guard bars, barred iron doorsladders and smilar work conforing to Fe 290 Gde E-165 complete all as specified and as directed.

S&F 1.25mm thick mild steel plain black sheet as in hearths, covering to door shutter, covering to door chowkats and similar work cut to size, holes punched, including round headed screws, clout nuts or rivets and fixed to wood or steel members etc with 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets etc asrequired including reveting or welding as required complete all as specified and as directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, hips, valley gutters, drip and straight flashings fixed with self tapping screws complete all as specified and as directed. (Colour shall be as approved by GE)

M&L for 75mm thick, PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base finished even and fair complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 25mm thick plain cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in floor finished even and fair complete all as specified and as directed.

M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for glazed coloured ceramic tiles(shade as approved by GE) of size 350mm x 250mm x 7mm/450mm x 350mm x 7 mm thick, as in dado, skirting, risers to step etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.

M&L for vitrified coloured ceramic tiles ,10 mm thick (square / rectangular), area of each tile n exc 0.36 sqm, shade as approved by GE in floor etc laid over and including 20 mm thick bedding layer in cement mortar 1:6, jointed in grey cement slurry and pointed in white or coloured cement to match with colour of tiles all as specified and as directed.

All as per serial item No 44 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4 .

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set and jointed and pointed in neat cement slurry with grey cement and pigment in floors, over and including 20mm thick screed bed in cement mortar 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces, finished even and fair complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:6 on stone masonry or other than fair faces of brick work surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality including ground or obscured or frosted on one side and glazing with oil putty in squares n exc 0.5sqm in each pane complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new steel surface of any description n.exc 10 cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxider complete all as specified and as directed.

M&L for preparation of old steel or iron surfaces exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks of capacity 500 litre (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tanks of capacity exc 250 litres and n exc 500 litres all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks of capacity 1000 litre (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tanks of capacity exc 500 litres and n exc 1000 litres all as specified and as directed.

Disconnecting existing tanks of 1000 litres capacity, setting aside (or lowering if required) for cleaning and removing all scale and dirt, etc. from tanks and mouths of circulating pipes etc. and hoisting, reconnecting and re-fixing in position complete all as specified and as directed.

Disconnecting existing tanks of 500 litres capacity, setting aside (or lowering if required) for cleaning and removing all scale and dirt, etc. from tanks and mouths of circulating pipes etc. and hoisting, reconnecting and re-fixing in position complete all as specified and as directed.

M&L for 15 mm dia steel water tubes, medium grade galvanised with all fittings and cancealed complete in wall, floor etc. complete all as specified and as directed. (Note. The rate of cutting chases and making good the surface is deemed to be included in the unit rate quoted by the contractor)

M&L for 20 mm dia steel water tubes, medium grade galvanised with all fittings and cancealed complete in wall, floor etc. complete all as specified and as directed. (Note. The rate of cutting chases and making good the surface is deemed to be included in the unit rate quoted by the contractor)

Fixing only 15 mm dia tubes, medium grade galvanised with all fittings and cancealed complete in wall, floor etc. complete all as specified and as directed. (Note. The rate of cutting chases and making good the surface is deemed to be included in the unit rate quoted by the contractor)

Fixing only 20 mm dia tubes, medium grade galvanised with all fittings and cancealed complete in wall, floor etc. complete all as specified and as directed. (Note. The rate of cutting chases and making good the surface is deemed to be included in the unit rate quoted by the contractor)

M&L for 16 mm dia (outer) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laid in floors all as specified and as directed.

Supplying and laying 20 mm dia (outer) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laid in floors all as specified and as directed.

S&F in repairs, bib taps, 15mm bore, cast copper alloy, chromium plated, cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs, stop valves 15mm bore, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair, brass chromium plated mixer for mixing hot and cold water, 15mm bore, screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repair, PVC connection 600mm long, 15mm dia with 2 Nos CP brass check nuts fixed complete all as specified and as directed.

S&F in repair, looking mirror of size 600mm x 450 mm of approved quality and make , mounted on 6 mm thick plywood commercial as backing and PVC edging fixed to wall with brass screws complete all as specified and as directed.

S&F in repairs, ball valve, 25mm bore, high pressure of PTMT, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs, ball valve 20mm bore, high pressure of PTMT, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs, shower rose 125mm size with or without swivel joints, chromium plated including fixing to steel pipe or union complete all as specified and as directed.

S&F in repairs, bib tap, PTMT, 15 mm bore of any colour, screwed for iron pipes and fixed complete all as specified and as directed.

S&F in repairs, pillar tap, PTMT, 15 mm bore of any colour, screwed for iron pips and fixed complete all as specified and as directed.

S&F in repairs health faucet cast copper alloy, chromium plated (hand shower) with 1.2 metre long flexible PVC tube and wall hook and fixed complete all as specified and as directed. Model No. ALD-563 of Jaquar or equivalent as approved by GE

S&F in repairs, vitreous China, white, squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet ( pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S & F in repairs vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.

S&F in repairs, 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs, 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repairs, 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal with oval access door complete all as specified and as directed.

S&F in repairs, 110mm boe PVC (SWR) bend any radius, with oval access door complete all as specified and as directed.

S&F in repairs,110mm bore PVC (SWR) bend any radius, complete all as specified and as directed.

S&F in repairs, 32mm bore PVC waste pipe for wash hand basins of length not exc 1.50m complete all as specified and as directed.

S&F in repairs, 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors complete all as specified and as directed.

S&F in repairs, 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repairs, 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with oval access door complete all as specified and as directed.

S&F in repairs, 75mm bore PVC (SWR) bend any radius, with oval access door complete all as specified and as directed.

S&F in repairs, 75mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F in repairs, Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

M/S JAI BHAWANI CONSTRUCTIONS

Bhirud Electric Stores

JANARDHANANDSONS

CHAUDHARY AND ASSOCIATES