REPAIR/REPLACEMENT OF INTERNAL WIRING, DISTRIBUTION BOARD, ELECTRIC FITTING AND FIXTURES AND REPAIR OF GEYSER AND OTHER CONNECTED WORKS, REPAIR/REPLACEMENT LT OH LINE, REPAIR/MAINT OF EARTHING, MCCBS, REPAIR/REPLACEMENT OF LT CABLE AND OTHER CONNECTE

Amount

M&L for testing of earthing by dismantling earth lead/strip from main switch board/test point testing the earth result by earth tester, noting the earth result in register, tightening nut and bolts of earth strip replacement of earth strip/earth wire where ever required, replacement of earth protection pipe as required and reconnect the earth strip with main switch board/ test point. Note: Earth strip and earth wire, GI earth protection pipe shall be measured and paid separately.

Supply only GI earth strip size 25 X 4 mm complete all as specified and directed.

Supply only GI earth protection pipe light grade size 32mm complete all as specified and directed.

M&L in repairs Earthing complete with galvanished earth plate electrode of size 600 x 600 x 6.00 mm buried directly in ground (earht pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts under galvanised iron protection pipe including earth work in any type of soil, charcoal salt 15cm alternate layer and around the earth plate as shown in electrical plate No. 3 of SSR Part I 2010, 20 mm dia watering pipe medium grade 1.70 mtr long GI protection pipe light grade 15mm dia from earth pit to main board including necessary pit cover complete all as specified and as directed.

All as per ser item No. 4.00 above but galvanised earth strip 25 x 4 mm as earth lead and protection pipe of size 32mm dia medium grade.

All as per ser item No. 4.00 above but copper earth plate electrode of size 600x600x3.15 mm & copper earth lead 20x3mm as earth lead.

M&L in repairs Sub main wiring with two single core FRLSH PVC insulated cable 4 sqmm (Nominal dia) copper conductor multistrand and drawing in and including PVC concealed conduit of size 20mm dia demium grade ISI market including 4 sqmm multistrand copper conductor FRLSH PVC green unsheathed cablefor earth continuity complete all as specified and directed. Note : Proper colour code shall be followed.

All as per ser item No. 7.00 but 6 Sqmm in and inclusive PVC conduit of size 25mm dia medium grade ISI marked.

All as per ser item No. 7.00 but 10 Sqmm in and inclusive PVC conduit of size 25mm dia medium grade ISI marked.

M&L in repairs Sub main wiring with four single core FRLSH PVC insulated cable 6 sqmm (Nominal dia) copper conductor multistrand and drawing in and including PVC Surface conduit 32 mm dia ISI marked,including 2x 6 sqmm multistrand copper conductor FRLSH PVC green unsheathed cablefor earth continuity complete all as specified and as directed. Note : Proper color code shall be followed.

All as per ser item No. 10.00 but 10 Sqmm.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings and making good disturbed surfaces of walls, floors etc.complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm multi stranded PVC insulated unseathed copper conductor cable FRLSH in and including PVC concealed conduit duly adequate size for one light point or fan point or bell point controlled by one way switch on plastic laminated sheet 3mm thick using existing MS/CI sunken box including PVC insulated unsheathed 1.5 sqmm copper conductor FRLSH continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specifications complete all as specified and as directed.

All as per ser item No. 13.00 above but one point controlled by two way switch.

All as per ser item No. 13.00 above but 3 pin socket outlet 5 Amps on independent board controlled by one swithch.

All as per srl item No 13.00 above but 3 pin socket outlet 5 Amps in same board.

All as per srl item No 13.00 above but cable 4 Sqmm and 3 pin 15 Amp socket outlet controlled by one switch.

M&L for point wiring with 1.5 sqmm multi stranded PVC insulated unseathed copper conductor cable FRLSH in and including PVC casing caping duly adequate size for one light point or fan point or bell point controlled by one switch including PVC insulated unsheated 1.5 sqmm copper conductor FRLSH continuous earth wire and connecting with earth dolly and making good the distrubed surfaces matching with existing specifications complete all as specified and directed.

S&F switch piano flush type 5 Amp one way AC 230 volts complete asll as specified and as ditrected. Note for item No 13.00 to 19.00 : Proper colour code shall be followed.

S&F Bell push flush type 5/6 Amp switch AC 230 Volts complete all as specified and as directed.

S&F switch piano flush type 5/6 Amp two way AC 230 volts complete all as specified and as directed.

S&F of socket outlet 5/6 Amp 5 pin AC 230 volt complete all as specified and as directed.

S&F switch socket combination outlet 2 in 1, 5/6 Amp 5 pin AC 230 volt complete all as specified and as directed.

S&F switch Socket combination outlet 2 in 1, 6 pin 5 amp and 15 Amp multi purpose socket outlet AC 230 volt complete all as specified and as directed

S&F switch piano flush type 15 Amp one way AC 230 volts complete asll as specified and as ditrected.

S&F ceiling rose of size 65 x 50mm 3/2 terminal AC 230 volt complete all as specified and as directed.

S&F lamp holder angle/ batten holder back light type with base plate suittable for 230 volt complete all as specified and as directed.

S&F door bell AC 230 volt Buzzer /ding dong single phase complete all as specified and as directed.

S&F in repairs electronic Ballast for FTL 36/40 watt 240 volts complete all as specified and as directed. Make Bajaj / Philips / Crompton

S&F in repairs of sheet metal enclosures for DBs when MCB to used SPN 12 way double door powder coated factory made with IP 43 protection, IP-09, fixed on wall /metal board/wooden board including making all incomming and outgoing connections with suitable copper lugs complete all as specified and as directed. Note:-MCB shall be measured and paid separetely.

S&F in repairs of sheet metal enclosures for DBs when MCB to used TPN 4 way double door poweder coated factory made IP 43 protection, IP 09 and provision of four pole, MCB/isolator/RCCB as incommer and SP/DP MCBs as outgoing fixed on wall/metal board/ wooden board complete all as specified and as directed. Note:-MCB shall be measured and paid separetely.

S&F in repairs MCB DBs, vertical TPN 4 way IP 43 protection TP 160 DPX3 as incomer. Note:-MCB shall be measured and paid separetely. Make : Havells , Cat part No DHDLVDRWGOFO04 or equivalent in legrand/standard.

S&F in repairs MCB SPN 63 Amps 10 KA complete all as specified and as directed.Cat Part No 408618 Make Legrand or equivelent in Havells or ABB

All as per ser item No. 33.00 above but MCB SP 6 to 32 Amps Cat Part No 408587 to 408595 Make Legrand or equivelent in Havells or ABB.

S&F in repairs MCB TPN 63 Amp, 415 V, 10 KA ISI Marked as per IS/IEC 60898-1 2002, IP 20 Protected channels complete all as specified and as directed Cat Part No 408683 Make Legrand or equivelent in Havells/ABB.

All as per srl item No 35.00 above but MCB TP 63 Amp Cat Part No 408681 Make Legrand or equivelent in Havells/ABB

S&F in repairs MCCB, 3 Pole ,415 V , 125 Amp with breaking capacity 16 KA incuding connected accessories, spreader terminals Model DPX 160 of Legrand or equivalent of Schnieder / Havells complete all as specified and as directed.

S&F in repairs MCCB, 3 Pole ,415 V , 160 Amp with breaking capacity 36 KA incuding connected accessories, spreader terminals Model DPX 160 of Legrand or equivalent of Schnieder / Havells complete all as specified and as directed.

S&F in repairs MCCB, 3 Pole ,415 V , 250 Amp with breaking capacity 36 KA incuding connected accessories, spreader terminals Model DPX 250 of Legrand or equivalent of Schnieder / Havells complete all as specified and as directed.

S&F in repairs MCCB, 3 Pole ,415 V , 400 Amp with breaking capacity 36 KA incuding connected accessories, spreader terminals Model DPX 400 of Legrand or equivalent of Schnieder / Havells complete all as specified and as directed.

S&F in repairs MCCB, 3 Pole ,415 V , 630 Amp with breaking capacity 36 KA incuding connected accessories, spreader terminals Model DPX 630 of Legrand or equivalent of Schnieder / Havells complete all as specified and as directed.

S&F in repairs of sheet metal enclosures Single pole and neutral with two pin earth plug and socket with plug top including double pole MCB 20 Amps complete all as specified and as directed.

S&F in repair surface and wall mounted 18 Watt LED tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver input voltage AC 230 V, 50 HZ complete all as specified and directed. Make: Havells cat Part No LHEXBTP7INIWo18 or equivalent in Philips/Bajaj

S&F in repair energy saving decorative wall mounting LED fitting made out of poly corbonate including 1x9/10 watt LED and making connections complete all as specified and directed. Make: Havells cat part No. LHDL02160099 or equvalent in Philips / Bajaj.

S&F in repair surface mounted, Bulk Head luminaire, hexagonal decorative 10 watt LED luminaire and making connections complete all as specified and directed. Make: Havells Cat part No HEXAFT 10W LED 857SSYMBOPC or equivalent in Bajaj, Crompton.

S&F in repair energy saving decorative wall mounting LED Lighting fixtures made out of poly corbonate suitable for 9 watt LED and making connections complete all as specified and directed. Make: Havells cat part no LHEXBLP7IN1W009 or equvalent in Philips / Bajaj .

S&F in repairs for FTL rod 36/40 watt 240 volts complete all as specified and as directed.

S&F in repairs for CFL 36/40 watt four pin type 240 volts complete all as specified and as directed

S&F in repairs electronic Ballast for CFL 36/40 watt 240 volts complete all as specified and as directed.

S&F in repairs Holder for CFL 36/40 watt four pin type 240 volts complete all as specified and as directed.

S&F in repairs LED, luminaire surface mounted 600x600 mm, white powder coated CRCA housing with LEDs to provide glare free symmetrical illumination with white coloured flat acrylic cover. Make- Havells Cat pt No. PLUTOSURFACE2*2PLS34WLED857S or equivalent make in Bajaj, Crompton.

S&F in repairs LED, luminaire surface mounted 300x300 mm, white powder coated CRCA housing with LEDs to provide glare free symmetrical illumination with white coloured flat acrylic cover. Make- Havells Cat pt No. PLUTOSURFACE1x1PLS15WLED857S or equivalent make in Bajaj, Crompton.

S&F in repairs plastic laminated bakelite hylem sheet of size 12 cm x 12 cm , 3mm thick, cut to required sizes and shapes including making holes and necessary cuttings for fitting of switches/ sockets/ regulators complete all as specified and directed

All as per Item No. 53.00 above but of size 12cm x 20cm

All as per Item No. 53.00 above but of size 22cmx18cm

Dismanteling and strip opening Water Heater 230 volts 25/35/50 Liters capacity 1500 / 2000 watt rating, taking out geyzer assemply elements and other connected accessories, descaling, cleaning of water tank, tubes assembly after repair reassembling ,Electric supply lead 3 core, flexible, PVC insulated and sheathed stranded copper conductor, 1100 Volts grade, size 2.5 Sqmm (nominal area), replacement of U/S 3 pin top 15 amp, reinstallation and connecting testing after satisfactorily serving and repairs complete all as specified and as directed. Note :- Electric cable 3 core 2.5 sq mm, Syphon assembly for item No 56.00 will be measured and paid separately under respective item of schedule.

S&F in repairs 3 core, flexible, PVC insulated and unsheathed stranded copper conductor, 1100 Volts grade, size 2.5 Sqmm (nominal area) ISI marked complete all as specified and as directed.

S&F in repairs of Syphon assembly complete suitable for 25/35 ltr water heater ISI marked complete all as specified and as directed.

S&F in repairs of Syphon assembly complete suitable for 50 ltr water heater ISI marked complete all as specified and as directed.

S&F in repairs of PVC connection heat resistant 24'' long ISI marked complete all as specified and as directed.

S&F in repairs of Sheet metal bottom cover having two halves circle complete all as specified and as directed.

S&F in repairs of Thermostat 35® C to 75® C of ISI marked complete all as specified and as directed.

S&F in repairs of Indicating lamp (LED ) red or green any shape and size matching to existing geyser complete all as specified and as directed.

S&F in repairs of Heating Element required size and shape, 2000 watt ISI marked,suitable to 25/35/50 litre water heater complete all as specified and as directed.

S&F in repair gasket packing set suitable for 25/35/50 liter water heater complete all as specified and as directed.

S&F in repairs of glass wool superior quality for geyser including removing inner tank and refixing properly complete all as specified and as directed.

S&F in repairs of modular switch 1 Way 6 Amp, 1 Module AC 230 volt complete all as specified and as directed.

S&F in repairs of Modular switch 1 Way 16 Amp, 1 Module AC 230 volt complete all as specified and as directed.

S&F in repairs of modular socket , 6 A-5 pin combined , 2 Module AC 230 volt complete all as specified and as directed.

S&F in repairs of modular socket , 6 A/16 Amp -6 pin combined, 2 Module AC 230 volt complete all as specified and as directed.

S&F in repairs of modular white cover plate with frame but 4 module complete all as specified and as directed.

S&F in repairs of modular white cover plate with frame but 8 module complete all as specified and as directed.

S&F in repairs PVC flat twin core cable, 10 sqmm with aluminium conductor all as specified and as directed.

S&F in repairs for Earth continuity conductor or main earthing lead 20x3 mm copper strip fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required.

S&F in repairs for LED domestic bulb 7 Watt type 240 volts complete all as specified and as directed. Make - Havells/Crompton/ Bajaj

S&F in repairs for LED domestic bulb 9 Watt type 240 volts complete all as specified and as directed. Make - Havells/Crompton/ Bajaj

S&F in repairs for LED domestic bulb 15 Watt type 240 volts complete all as specified and as directed Make - Havells/Crompton/ Bajaj

M&L in repairs of PVC insulated twin core flexible copper cable of size 40/76 Guage complete all as specified and as directed.

S&F in repairs PVC single core Cable copper conductor of size 2.5 Sqmm complete all as specified and directed.

S&F installation, testing and commissioning in repair of pressure die-cast aluminium housing with high power LED bldg security light fitting with IP-66 , 1x 25 Watt , fixed in position with and including 40 mm dia light grade GI Pipe made to shape not less then 1.2 Mtr long for mounting fitting with and including suitable size duly painted MS FI 40 x6mm clamps with nut and bolts , washers making electrical connection with and including three core 16/0.20 mm copper conductor flexible cable from connector to fitting complete all as specified and directed. Make-Havells Cat Part No ENDURAPEARLSL25WLED757SASYTOPC or equivalent to Philips/CG

Restringing of existing ACSR’s conductors and earth wires including cradles, of any description, size & shape and in any position, as in LT/HT overhead lines, on existing poles, including opening of connections and binding wires, restringing and tightening of conductors/earth wire in position, removing sag, binding to insulators with new aluminum wire, making and connecting jumper connections etc. including testing complete all as specified and directed. The quoted rates shall be deemed to include the following provisions also :- (i) Setting/adjusting etc in position of cradles. (ii) Old serviceable spacers of ACSR conductor shall be reused and fixed as directed.

Dismantling & taking down of existing worn out / unserviceable aluminium conductor, steel reinforced (ACSR) of any description /size & in any position from existing LT/HT Poles/Lines all as specified & directed.

S&F of aluminium conductor, steel reinforced (ACSR) of any size/description on LT poles/lines including stringing, tightening, binding to insulators with aluminium wire making and connecting jumpers, connections etc including connecting, commissioning and testing complete all as specified & directed. Note:-Old serviceable spacers obtained from taking down of ACSR conductor under item No.84 shall be reused and fixed as directed.

Re-Fixing and stringing of old ACSR’s conductors and earth wires including cradles, of any description, size & shape and in any position, as in LT/HT overhead lines, on existing poles, including opening of connections and binding wires, restringing and tightening of conductors/earth wire in position, removing sag, binding to insulators with new aluminum wire, making and connecting jumper connections etc. including testing complete all as specified and directed. The quoted rates shall be deemed to include the following provisions also :- (i) Setting/adjusting etc in position of cradles. (ii) Old serviceable spacers of ACSR conductor shall be reused and fixed as directed.

Dismantling & taking down of existing worn out / unserviceable GI wire of any description/size & in any position from existing LT/HT Lines including cradle guard wires all as specified & directed.

M&L for supplying, stringing and fixing GI continuous GI earth wire of size 4 mm / 3.15 mm dia on LT/HT poles as in cradle guards / earth wires etc including binding complete all as specified & directed.

Dismantling & taking out of old existing unserviceable steel & iron items from poles such as cross arms, bracing, supports, clamps and back plate fabricated from structural steel sections including nuts & bolts, washers of any description and in any position from LT over head line poles/ street light poles complete all as specified & directed.

Fixing only old serviceable steel & iron ,mild steel such as cross arms, bracing, supports, clamps and back plate fabricated from structural steel sections including nuts & bolts, washers and pointed with two coat of aluminium paint over one coat of red oxide primer including preparation of old steel surface complete all as specified & directed.

Supply, fabrication and fixing for mild steel such as cross arms, bracing, supports, clamps and back plate fabricated from structural steel sections pointed with two coat of aluminium paint over one coat of red oxide primer including nuts & bolts, washers of any description of LT over head line poles/ street light poles complete all as specified & directed.

Dismantling & taking out of old existing unserviceable insulators of any description and in any position from LT/HT poles all as specified & directed.

S&F single disc assembly for disc type insulator porcelain vitreous 145mm high and 255mm dia ball and socket type, white , brown or green HT 11 KV grade all as specified & directed for HT overhead lines. Make: Jayshree/Modern/Jaipuria brothers/Mysore porcelain/WS insulator.

S&F pin type porcelain, vitreous, white, brown or green insulators, including one galvanized mild steel spindle two galvanised iron washers and one galvanised iron nut, 150mm height and 150mm dia suitable for working pressure upto and including 11000 volts grade complete all as specified for HT lines fixed on poles. Make: Jayshree/Modern /Jaipuria brothers/Mysore porcelain /WS insulator

All as per item No 92.00 above but of size 100mm height and 65mm dia. Make:- Jayshree/Modern /Jaipuria brothers/Mysore porcelain /WS insulator

S&F Shackle type 75mm height and 90mm dia insulator, porcelain, vitreous, white, brown or green including galvanised mild steel strap 31mm X 3mm, insulator bolts 12mm dia with suitable washers and nut, suitable for working pressure upto & including 1100 volts, complete all as specified and directed F23 fixed on LT poles. Make:Jayshree/Modern /Jaipuria brothers/Mysore porcelain /WS insulator.

Disconnecting, dismantling and taking down existing unserviceable best quality spacers of any description and in any position from the LT electric overhead lines of any height and supplying and fixing new PVC insulated spacers, 12mm dia flexible type suitable for making / turning to any shape and size and suitable for 2 or 3 conductor runs complete all as specified and directed.

All as per item No 95.00 above but PVC insulated straight strip type spacers suitable for five conductor run overhead lines.

Disconnecting, dismantling & taking out existing unserviceable gang operated switch of any description and in any position complete all as specified and directed.

Supply, fixing, commissioning and testing of outdoor, gang operated switch, tilting type, 11KV of current rating upto 200 Amps, triple pole, each pole consisting of galvanized steel base, HT insulators as per IS, non ferrous knife and spray, loaded contacts, arcing horns of adequate section to break magnetizing current of the transformers, horizontal GI pipe of size 25mm dia medium grade of adequate length for phase separation, adequate length of GI pipes for operation from ground level and operating handle with locking arrangement complete in both OFF & ON positions. All ferrous parts hot dripped galvanized and non ferrous heavily tinned to with stand weather and suitable for vertical mounting complete all as specified and as directed. Make:-Pactil/Jaipuria Brothers/Atlas.

Dismantling 11 KV air break gang operated switches vertical/horizontal mounted including insulators and operating mechanism for insulators and operating mechanism or repair/replacement o broken/worn out components and insulators etc. complete all as specified and directed. (Note :- New spare parts replaced for GOD shall be measured and paid for separately under respective items of Sch 'A' as “supply only” but fixing element of same shall be deemed to be included under this item. Make : Pactil/Jaipuria Brothers/Atlas

Supply only 11KV post type insulator. Make-Pactil/Jaipuria Brothers/ATLAS.

Supply only male contact/moving contact blade. Make-Pactil/Jaipuria Brothers/ATLAS.

Supply only female contact/fix contact Jaw. Make-Pactil/Jaipuria Brothers/ATLAS.

Supply only MS Jumper carrier. Make-Pactil/Jaipuria Brothers/ATLAS.

Supply only tinned copper flexible jumper . Make-Pactil/Jaipuria Brothers/ATLAS.

Supply only back connector plate. Make-Pactil/Jaipuria Brothers/ATLAS.

Dismantling and taking down existing unserviceable lightening arrestor of any capacity and any description.

S&F, commissioning & testing of Lightning arresters HIGH TENSION 11000 VOLT expulsion type complete with all fittings, transmission class discharge capacity 65 kilo amp confirming to EC-99 -41/1990 including brackets, clamps, bolts, nuts and washers complete all as specified and directed. Make: Oblum/ Jaipuria Brothers/Elpro.

Dismantling and Taking down existing unserviceable stay assembly and supply and fixing for stay assembly comprising of 16mm dia, 1.80 metre long galvanized stay rod, having 7/3.15mm GI stay wire stranded and 230mm x 230mm x 6mm thick stay plate, complete all as shown on electrical plate No 1 of SSR, Part-I with and including all necessary fittings/ accessories like loop type insulator, stay clamps, necessary excavation and earth work in any type of soil and PCC works in (1:3:6) type C-2 (using 40mm graded stone aggregate) including taking down and dismantling old unserviceable stay assembly etc complete all as specified and directed.

All as per item No 108.00 above but stay assembly having stay rod of 20mm dia and 2.15 metre long with 300mm x 500mm x 6mm thick MS plate.

Trimming/cutting of all trees branches and cleaning of bushes upto 2 metre distance both side from nearest conductor/Earth wire at LT/HT overhead line including cleaning of site and depositing of material upto 250 metre distance all as directed. Note:- One year defect liability clause shall not be apply on this item.

M&L for surface excavation,grass cutting over the areas around the poles/feeder piller boxes/ sub stations not exceeding 15cm depth including cleaning the bushes and vegetation/root of small trees and leveling incl removal of surplus soil in soft/hard dense soil.and deposited where 15 cm directed.

Dismantling and taking down existing unserviceable/worn out danger notice plate of any description& any position and S&F for danger notice plate 20x15 cm size and 1.6 mm thick mild steel vitreous enameled white, with letters, figures and conventional skull and bones in signal red colour and fixed with including connected accessories complete all as specified and directed.

Dismantling and taking out unserviceable 11 KV HT sleeves by opening PG clamps of any description of any position supplying & fixing HT 11 KV heat shrinkable epoxy sleeves in prescribed colour complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate in repair as in coping including necessary foam work or in any situation complete all as specified and directed.

S&F (PG Clamp) by Compression/crimping type sleeve joints for jointing conductors /jumper connections including treatment with conducting jelly all as specified and directed.

Dismantling & taking down Old Anti climbing devices and Supply and Fixing For Anti climbing devices; comprising 2.24mm dia galvanised steel 2-strand barbed wire with 2.00mm dia barbs wrapped spirally round poles, to a length of 0.5 to 1.0 metre clamped and properly secured or as ordered (clamps measured separately all as specified directed.

Disconnecting, taking out and removing old existing unserviceable underground, LT cable of size 35 Sqmm to 70 Sqmm any core and in any position complete including taking down protection pipe, PCC Cover/Bricks etc all as specified and directed.

All as per ser item No. 117.00 above but 95 Sqmm to 150 Sqmm any core.

All as per ser item No. 117.00 above but 185 Sqmm to 300 Sqmm any core.

Relaying ony old serviceble cable , jointing and testing 35 Sqmm to 70 Sqmm any core and laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed.

All as per ser item No. 120.00 above but 95 Sqmm to 150 Sqmm any core.

Supply, laying, jointing and testing XLPE/ P.V.C insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade of 35 Sqmm 3.5 core and any make laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed. Make:-HAVELLS Ref No-(A2XWY/A2XFY), ICL, CCI, Fort GloSter Etc.

All as per ser item No. 122.00 above but 50 Sqmm 3.5 core

All as per ser item No. 122.00 above but 70 Sqmm 3.5 core

All as per ser item No. 122.00 above but 95 Sqmm 3.5 core.

All as per ser item No. 122.00 above but 120 Sqmm 3.5 core.

All as per ser item No. 122.00 above but 150 Sqmm 3.5 core.

All as per ser item No. 122.00 above but 185 Sqmm 3.5 core.

All as per ser item No. 122.00 above but 300 Sqmm 3.5 core.

Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. all as specified and directed removing cable protection PCC covers/ bricks & stacking serviceable covers / bricks for reuse and disposal of unserviceable covers within 50 m all as specified and directed. Note: Excavation shall be made carefully in order to avoid damage of existing cables and protection covers.

Returning, filling in including spreading, leveling, watering and well ramming in layers of 25 cm thick after the cables etc. are laid, jointed & tested complete all as specified and directed

Removal of surplus excavated soil exc. 50 mtr but n. exc. 250 mtr distance and depositing where directed at a level not exceeding 1.5 M above the starting point etc complete all as directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed . NOTE:-Punned thickness shall be measurement & paid.

Supplying & Laying Sub Class `B’ bricks old size with length axis of the bricks perpendicular to the axis of the cable as in cable protection all as specified and directed

All as per ser item No. 134.00 above but laying only bricks obtanied from item No 130.00 above.

Laying only precast concrete cover obtained from ser item No. 130.00 above.

S&F of modular switch 1 Way 6 Amp, 1 Module AC 230 volt complete all as specified and as directed.

Disconnecting the existing non functional submersible pump sets from supply line dismantling from rising mains, removing and lifting out submersible pump sets of 7.5 HP to 20 HP capacity in any position along with existing column pipe 80 mm dia and submersible cable of any size from bore well 150/200mm dia (approx 70 mtr depth of pupmpset from GL).

Lowering down the serviceable submersible pump sets of any description and in any position and in any capacity in bore well along with the column pipe 80mm dia up to 70 mtr deep and submersible cable of any size complete all as directed and making necessary electric connection, connect with rising main and testing complete after lowering.

Dismantling and strip opening of submersible pump and motor 15 HP to 20 HP, 3 phase, 415 volts, 50hz AC Supply of any description and in any position for servicing/overhauling, cleaning, greasing, removing and replacement of defective unserviceable parts with new parts, reassembling the pump and motor with proper alignment of both pump and motor, fixing in position connecting to existing system and testing at site of full load to the entire satisfaction of the Engr-in-charge.

All as per ser item No. 140.00 above but 10.5 HP to 12.5 HP, 3 phase, 415 volts, 50hz AC Supply

All as per ser item No. 140.00 above but 7.5HP, 3 phase, 415 volts , 50 Hz AC supply. Note for item No. 140 to 142: (i) The replacement of defective non functional parts shall be measured and paid for separately under respective item of Sch A item No. 143 to 159. (ii) Burnt out winding of motor shall be replaced measured and paid for separately under appropriate item of Suh A. (iii) The rate of above item shall be deemed to include transportation to and fro of pump, motor to workshop for necessary repair, alignment and testing of pump and motor at workshop. (iv) lifting and lowering of the submersible pump & motor,shall be measured & paid under Sch item No 138 & 139 of Sch 'A'.

Supply only Gun metal bush upper and lower.

Supply only Brass thrust plate

Supply only C I thrust bearing

Supply only CI thrust casing

Supply only Water seal

Supply only CI lower housing of shaft

Supply only CI upper housing of shaft

Supply only Rotor sleeve

Supply only coupling set with key of stainless steel

Supply only discharge outlet CI

Supply only stage casing CI

Supply only gun metal sand guard

Supply only gun metal neck ring

Supply only gun metal impeller

Supply only gun metal body bush

Supply only CI suction housing

Supply only SS distance bush

S&F in repair HS shaft with key for the submersible pumps of any description and capacity having 7 to 10 stages 10.5 HP to 20 HP complete all as specified and as directed.

S&F in repair to impeller of submersible pump of any description by breezing , welding , metalling,turning and polishing of capacity 7.5HP to 20HP all as specified and as directed.

S&F in repair for rewinding of submersible motor 15 HP to 20 HP, 3 Phase 415 V, AC 50 Hz with proper size PVC insulated copper winding wire of existing size and approved make after taking down burnt winding, cleaning of slots with CTC solution, fixing in position and testing complete all as specified and as directed.

All as per ser item No. 162.00 above but 10.5 HP to 12.5 HP, 3 Phase 415 V, AC 50 Hz.

All as per ser item No. 162.00 above but 7.5 HP, 3 Phase 415V AC 50 Hz.

S&F in repair for heavy duty GI Bend suitable for 80 mm bore column pipe, one side threaded for socket & other side drilled for nut bolts for flange & having arrangement of mounting pressure gauge, including flange & socket.

S&F foot valve 2.5 inch dia complete with connecting items.

S&F in repair for run lead joint for 80 mm dia bore CI pipe spigoted and socketed joints and pipe fittings all as specified and as directed.

All as per item 167.00 above but 100 mm dia bore

All as per item 167.00 above but 150 mm dia bore

S&F in repair of digital type Voltmeter 0-500 v square type 96mmx96mm complete all as specified & as directed. Make-AE

S&F in repair of digital type Ammeter 0-30 Amps square type 96mmx96mm complete all as specified & as directed. Make-AE

S&F in repair to water level indicator of overhead reservoir/semi under ground tank by providing aluminum float valve of suitable size with refunctioning of pulley and replacement nylon rope 4mm thick, painting the existing water gauge with two coats of synthetic enameled paint(black) and calibration the same properly with respect to water level and marking with white synthetic glazed paint and painting the indicator pointer with red paint of glazed synthetic enameled paint complete all as specified and as directed.

M&L for cleaning of underground sump of capacity 20000 glns with the help of wire brushes & necessary chemical complete surface of RCC tank and flushing out, applying two coats of epoxy based paint suitable for potable water on the internal walls of the reservoir complete all as specified and as directed.

S&F in repair of single phase priventer suitable for 10 to 20 HP submersible motor /pump to faciliated protection from single phasing,over current, dry run complete all as specified and directed. Make: Schneider, Minilec, L&T.

S&F in repair of fully automatic star- delta motor starters. Capacity 10.5 HP to 20 HP oil immersed with protection system complete all as directed and specified. Make:- Bentax or equivalent in L&T/Havells.

M&L in repair for submersible cable joint for 3 core 6 Sqmm/10 Sqmm with waterproof compound and testing complete all as specified and as directed.

S&F in repair of MS flange heavy duty 80mm dia complete all as specified and as directed.

All as per srl item No 178.00 above but for 100mm dia.

S&F in repair 3 pole MCCB 200 amp 415 V adjustable type with breaking capacity 36 KA complete all as specified and as directed. Make: LEGRANDS/ Havells/ABB.

M&L for painting of complete Lt panel , pipe,connected pipe line, motors and connected accessaries including foundation and with one under coat and one finishing coat with heat resistant enamel paint of approved colour after cleaning preparation of surface of existing colour all as specified and directed including writing of machine make serial No and MES on with white paint in bold letters complete all as specified and as directed.

Taking out sluice valves 80mm bore refacing , regrinding and refixing with repacking stuffing box of sluice valve spindle including taking apart and reassembling complete all as specified and and directed

All as per ser item No. 182.00 above 100mm bore.

All as per ser item No. 182.00 above 150mm bore.

S&F in repair stainless steel spindle with gun metal nuts suitable for 150 mm dia sluice valve

All as per item No 185.00 above but 100mm dia sluice valve

All as per item No 185.00 above but 80mm dia sluice valve

All as per item No 185.00 above but 200mmdia sluice valve

Supply and replace Stuffing box with gland plate and gland nut and bolts suitable for of size 200 mm sluice valve.

All as per item No 189.00 above but 150 mm bore pipe double ends.

All as per item No 189.00 above but 100 mm bore pipe double ends.

All as per item No 189.00 above but 80mm bore pipe double ends.

S&F float valve brass 20 mm bore complete all as specified and directed.

S&F in repair of cast iron 80mm bore sluice valve PN 1.6 both flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolt nuts and washers graphite rope complete all as specified and and directed

All as per item No 194.00 above but 100mm bore pipe.

All as per item No 194.00 above but 150mm bore pipe.

S&F in repair of cast iron 80mm bore Non return sluice valve both flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolt nuts and washers graphite rope complete all as specified and and directed.

All as per item No 197.00 above but 100mm size.

S&F in repair of cast iron 80mm bore Butterfly valve both flanged heavy duty drilled and installed with brass spindle gun metal face rings rubber gasket 3mm thick MS bolt nuts and washers graphite rope complete all as specified and and directed.

All as per item No 199.00 above but 100mm size

Supply and laying in repair of GI tubing 15mm bore galvanised medium grade of any length including all fitting such as bend, elbow, tee and union laid in trenches/floor with required cutting , threading etc complete all as specified and directed

All as per item No 201.00 above but 20mm bore pipe.

All as per item No 201.00 above but 25mm bore pipe.

All as per item No 201.00 above but 50 mm bore pipe.

All as per item No 201.00 above but 80mm bore pipe.

All as per item No 201.00 above but 100mm bore pipe.

M&L in repair of for brick masonery valve pit internal dimension 800x800x800mm incl necessary excavation and earth work 50x6mm angle iron frame hold fasts MS sheet cover 3mm thick, handles, locking arrangementcomplete all as specified and directed.

All as per ser item No. 207.00 above but 900mm x 900mm x 750mm.

All as per ser item No. 207.00 above but 600mm x 600mm x 500mm.

Supply & installation in replacement of stequa single stage auto economy sanatizer station.

Stequa auto economy refile 411 AE Tablet.

Supply installation in repair bucket made out of MS sheet of capacity 9 ltr with carrying handle at bottom of the bucket each for fire fighting point duly painted with PO office red enamel complete all as specified and directed.

Supply and lying in repair of rubber mat of size 1 M x 2 M , 19 mm thick complete all as specified and directed.

Supply installation in repair ABC type fire Extinguiser of cap 9 ltr (ISI marked) with all assesories complete all as specified and directed.

Supply and installation PVC first aid box in built hanging and locking arrangement with all necessary first aid Kit complete all as specified and directed.

M&L for rubber gasket/tightening joints for 100mm dia CI/DI pipes complete all as specified and as directed.

M&L for re-threading of GI column pipe 80mm dia 3m long including cleaning, finishing complete all as specified and as directed.

S&F in repair of PVC insulated Submersible 3 core copper multi standard flat cable 6 Sqmm 1100 Volt all as specified and directed.

All as per ser item No. 218.00 above but 10 Sqmm.

M&L for Repair and rectified leakage up to 40 mm bore pipe from any size of pipe line at site including all connected fitings and fixture as per site requirment /necessary exvation /cutting /threading etc and making good surface complete and as directed.

All as per srl item No 220.00 above but 50mm to 80mm bore.

All as per srl item No 220.00 above but 100mm to 150mm bore.

S&F in repair of 3 pole MCCB 125 Amp 415 V adjustable type with breaking capacity 36 KA complete all as spd and as directed. Make:-LEGRANDS/Havells/ABB

M/S AUTOMATION AND SWITCHGEAR CONTROL

M/S ISLAM AND BROTHERS

GUPTA ENGINEERING WORKS