Repairs of classrooms in Government PU College in Sagar Town in Sagar Tq Shivamogga District.

Repairs of class room in G P U C in Sagar Town

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-c...

Repairing door and window frames with available wood to the required size. (Vol-2, It.No: 20.103) complete including cost and conveyance of all materials with hire charges of machinery and equipments,...

Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards. (Vol-2, It.No: 20.104) complete including cost and conveyance of all materials with hire charges of ma...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...

Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, ker...

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

Providing 15mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removin...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing and fixing factory made ISI marked steel glazed doors, windowsand ventilators, side /top /centre hung, with beading and all memberssuch as F7D,F4B, K11 B and K12 B etc. complete of standard ...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops a...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One coats on old work as per specifications and as per directions of Engineer incharge...

Hydraulic door closer( PWD CSR ,P no.A-25, SL.No.453)Vol-2 complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unlo...

Bolt+Nut - 16 x 30 mm( PWD CSR ,P no.A-14, SL.No.70)Vol-2 complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloa...

Door lock( PWD CSR ,P no.A-20, SL.No.274)Vol-2 complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charge...

Hinges( PWD CSR ,P no.A-25, SL.No.443)Vol-2 complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loading and unloading charges, ...

Oxidised mild steel handles 125 mm( PWD CSR ,P no.A-29, SL.No.579)Vol-2 complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loa...

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm(PWD CSR P No. 219, I. No 22.15.10) V-2 complete including co...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

P.T.M.T. Bib cock with nozzle 15mm( PWD CSR ,P no.A-30, SL.No.591)Vol-2 complete including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead & lift, loa...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step u...

40 mm nominal dia Pipes (3%area wtg)

32 mm nominal dia Pipes (3%area wtg)

25 mm nominal dia Pipes (3%area wtg)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc.complete.50mm dia PVC couplers, ...

50mm dia PVC couplers (3%area wtg)

40 mm dia PVC couplers (3%area wtg)

32 mm dia PVC couplers (3%area wtg)

25 mm dia PVC couplers (3%area wtg)

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC Elbows, 40 mm dia PVC...

50 mm dia PVC Elbows (3%area wtg)

40 mm dia PVC Elbows (3%area wtg)

32 mm dia PVC Elbows (3%area wtg)

25 mm dia PVC Elbows (3%area wtg)

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC Tee, 40 mm dia PVC Tee, ...

50 mm dia PVC Tee(3%area wtg)

40 mm dia PVC Tee (3%area wtg)

32 mm dia PVC Tee (3%area wtg)

25 mm dia PVC Tee (3%area wtg)

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 50 mm dia PVC BEND, 40 mm dia PVC BEND...

50 mm dia PVC BEND (3%area wtg)

40 mm dia PVC BEND (3%area wtg)

32 mm dia PVC BEND (3%area wtg)

25 mm dia PVC BEND (3%area wtg)

Supply of PPR Pipe Clamp confirming to IS 15801-2008 and DIN Standards 8077/8092 , PPR Pipe Clamp 50mm, PPR Pipe Clamp 40mm, PPR Pipe Clamp 32mm, PPR Pipe Clamp 25mm( PWD CSR. P.NO 38 I.No.2.69.6, 2...

PPR Pipe Clamp 40mm (3%area wtg)

PPR Pipe Clamp 32mm (3%area wtg)

PPR Pipe Clamp 25mm (3%area wtg)

Supply of PPR Gate valve confirming to IS 15801-2008 and DIN Standards 8077/8092 ,PPR Gate valve 25mm, PPR Gate valve 32mm( PWD CSR ,P no.41, I.No.2.79.2,2.79.3, 2.79.4, 2.79.5)Vol-5 complete includ...

PPR Gate valve 32mm (3%area wtg)

PPR Gate valve 40mm (3%area wtg)

PPR Gate valve 50mm (3%area wtg)

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

b) 1.5 sqmm.Mtr (3%area wtg)

c) 2.5 sqmm.Mtr (3%area wtg)

Supplying of .feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burninghours & 70 lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power facto...

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu...

Repairing door and window frames with available wood to the required size. (Vol-2, It.No: 20.103) complete including cost and conveyance of all materials with hire charges of machinery and equipments...

Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards. (Vol-2, It.No: 20.104) complete including cost and conveyance of all materials with hire charges of m...

Providing and fixing factory made ISI marked steel glazed doors, windowsand ventilators, side /top /centre hung, with beading and all memberssuch as F7D,F4B, K11 B and K12 B etc. complete of standard ...

Providing fixing of 2 track 2-panel sliding windows made out of multi chambered UPVC Matching to RAL-9016 sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastome...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...

Providing 15mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removin...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops a...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One coats on old work as per specifications and as per directions of Engineer incharge...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step u...

40 mm nominal dia Pipes(3%area wtg)

32 mm nominal dia Pipes (3%area wtg)

25 mm nominal dia Pipes (3%area wtg)

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc.complete.50mm dia PVC couplers, ...

40 mm dia PVC couplers (3%area wtg)

32 mm dia PVC couplers (3%area wtg)

25 mm dia PVC couplers (3%area wtg)

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC Elbows, 40 mm dia PVC...

40 mm dia PVC Elbows (3%area wtg)

32 mm dia PVC Elbows (3%area wtg)

25 mm dia PVC Elbows (3%area wtg)

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC Tee, 40 mm dia PVC Tee, ...

40 mm dia PVC Tee (3%area wtg)

32 mm dia PVC Tee (3%area wtg)

50 mm dia PVC Tee (3%area wtg)

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 50 mm dia PVC BEND, 40 mm dia PVC BEND...

40 mm dia PVC BEND (3%area wtg)

32 mm dia PVC BEND (3%area wtg)

25 mm dia PVC BEND (3%area wtg)

Supply of PPR Pipe Clamp confirming to IS 15801-2008 and DIN Standards 8077/8092 , PPR Pipe Clamp 50mm, PPR Pipe Clamp 40mm, PPR Pipe Clamp 32mm, PPR Pipe Clamp 25mm( PWD CSR. P.NO 38 I.No.2.69.6, 2...

PPR Pipe Clamp 40mm (3%area wtg)

PPR Pipe Clamp 32mm (3%area wtg)

PPR Pipe Clamp 25mm (3%area wtg)

Supply of PPR Gate valve confirming to IS 15801-2008 and DIN Standards 8077/8092 ,PPR Gate valve 25mm, PPR Gate valve 32mm( PWD CSR ,P no.41, I.No.2.79.2,2.79.3, 2.79.4, 2.79.5)Vol-5 complete includ...

PPR Gate valve 32mm (3%area wtg)

PPR Gate valve 40mm (3%area wtg)

PPR Gate valve 50mm (3%area wtg)

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

b) 1.5 sqmm.Mtr (3%area wtg)

c) 2.5 sqmm.Mtr (3%area wtg)

Supplying of .feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burninghours & 70 lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power facto...

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu...

Providing and fixing factory made ISI marked steel glazed doors, windowsand ventilators, side /top /centre hung, with beading and all memberssuch as F7D,F4B, K11 B and K12 B etc. complete of standard ...

Providing fixing of 2 track 2-panel sliding windows made out of multi chambered UPVC Matching to RAL-9016 sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastome...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...

Providing 15mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removin...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops a...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Supply of PPR Gate valve confirming to IS 15801-2008 and DIN Standards 8077/8092 ,PPR Gate valve 25mm, PPR Gate valve 32mm( PWD CSR ,P no.136, I.No.2.79.2, 2.79.3, 2.79.4, 2.79.5)Vol-5 complete incl...

PPR Gate valve 32mm (3%area wtg)

PPR Gate valve 40mm (3%area wtg)

PPR Gate valve 50mm (3%area wtg)

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step u...

40 mm nominal dia Pipes (3%area wtg)

32 mm nominal dia Pipes (3%area wtg)

25 mm nominal dia Pipes (3%area wtg)

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc.complete.50mm dia PVC couplers, ...

32 mm dia PVC couplers (3%area wtg)

40 mm dia PVC couplers (3%area wtg)

50 mm dia PVC couplers (3%area wtg)

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC Elbows, 40 mm dia PVC...

40 mm dia PVC Elbows (3%area wtg)

32 mm dia PVC Elbows (3%area wtg)

25 mm dia PVC Elbows (3%area wtg)

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 50 mm dia PVC Tee, 40 mm dia PVC Tee, ...

40 mm dia PVC Tee (3%area wtg)

32 mm dia PVC Tee (3%area wtg)

50 mm dia PVC Tee (3%area wtg)

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 50 mm dia PVC BEND, 40 mm dia PVC BEND...

40 mm dia PVC BEND (3%area wtg)

32 mm dia PVC BEND (3%area wtg)

25 mm dia PVC BEND (3%area wtg)

Supply of PPR Pipe Clamp confirming to IS 15801-2008 and DIN Standards 8077/8092 , PPR Pipe Clamp 50mm, PPR Pipe Clamp 40mm, PPR Pipe Clamp 32mm, PPR Pipe Clamp 25mm( PWD CSR. P.NO 38 I.No.2.69.6, 2...

PPR Pipe Clamp 40mm (3%area wtg)

PPR Pipe Clamp 32mm (3%area wtg)

PPR Pipe Clamp 25mm (3%area wtg)

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50mheight. The granite/trap/...

Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to opening...

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

Providing 15mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removin...

Granite of any colour, 18 mm thick (slab area above 0.50 m2)( PWD CSR ,P no.410, A-24, SL.No.)Vol-2 complete including cost and conveyance of all materials with hire charges of machinery and equipment...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and placing on terrace,( at all floor levels) polyethylene water storage tanks IS 12701 marked with cover and suitable locking arrangements and making necessary holes for inlet , outlet and...