Constt of Pessenger shed at PWD Road

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering .All work up to plinth level . 1:5:10 ( 1 cement :5 fine sand :10 graded stone aggregate 40 mm nominal size ) Nallah.

P L of RCC 1:1.5:3 (1 Cement : 1.5 coarse sand :3 graded crushed stone aggregate 20 mm nominal size),

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work up to plinth level 1:3:6 ( 1 cement :3coarse sand :6 graded stone aggregate 20 mm nominal size)

Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc. Layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.50 M

dry boulder stone filling layed on horizontal surface

P L of RCC 1:1.5:3 (1 Cement : 1.5 coarse sand :3 graded crushed stone aggregate 20 mm nominal size),

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . TMT bars.Including all leads, lift and carriage complete

Centering and shuttering including strutting, propping etc. and removal of formwork for Foundations, footings, bases of columns, etc.

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement :6 fine sand )

12 mm cement plaster of mix 1:4 (1 cement :4 fine sand )

Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg. ) finished with a floating coat of neat cement including cement slurry,but excluding the cost nosing of steps etc complete. 40 thick with 20 mm nominal size stone agg. Crushed

Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacture and of required shade/colour complete as per manufacture's specificationsTwo or more coats on new work