8516E8REPAIR TO ROOF FLOORING JOINERY SANITARY FITTINGS AND MISC WORKS IN 6TH 7TH CAMP INCL PERIODICAL SERVICES FOR MD ACCN IN EAST AREA OF AF STATION UNDER GE M AF JALAHALLI BANGALORE

Amount

Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for including removal debiries from MD land.

Material and labour for 50mm thk PCC 1:2:4 type B-1 using 20mm graded agg as in flooring finished even and smooth without using extra cement

Material and labourfor cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates complete finished fair and even.

Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store including removal rubbish off the premises.

Material and labour for 25mm thick PCC (1:2:4) type B1 using 20mm graded stone agg as in levelling coarse under floor all as specified & directed

Material and labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor.

Material and labour for non skid coloured joint free tiles 1st quality 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Material and labourfor coloured glazed ceramic tiles 1st quality of size 300x200x7 to 8mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match.

Material and labour for Dubbing out 15mm thick on irregular face of walls in CM 1:6 on brick work or concrete/stone surfaces.

Material and labour for rendering 10mm thick in CM 1:3 on brick work or concrete surfaces as in backing coat to receive wall tiles etc.

Material and labour for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in coping, benching in floor complete all as specified and as directed.

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar including removal rubbish off the premises..

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins, arches etc complete including removal rubbish off the premises.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6.

Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4.

Supply and fixing of chicken wire mesh of galvanised steel wire 0.3 mm dia, 25 x 25 mm mesh fixed by nailing to walls vertically along and across the cracks etc incl racking out existing crack to a depth of 15mm and 20mm wide making good surface with CM 1:3 complete as directed

Material and labour for Rendering 15mm thick in CM (1:4) (5mm with WPC over 10mm thick in two layers) on external surfaces of walls mixed with water proofing compound on stone masonry/roof plaster under WPT/concrete surface or brickwalls finished even & smooth without using extra cement. Note : WPC shall be measured & paid seperately

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

Material and labour for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

Material and labour for making groove in plaster of size 10mm width and 8mm depth in junction of wall and Col/Beam and applying Sika Primer 3N and filling with Sikaflex Construction (AP) with 112gm sealant/rm incl thermocol rod backup as per manufacturer's instructions

Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for.

Material and labour for form work to soffits of suspended slabs such as roof slab floor slab not exc 200mm thick with rough finished surface of concrete.

Material and labour for reinforced cement concrete (1:2:4)typeB-1using 20mm graded stone aggregate as in slabs and finishing exposed surfaces fair & even all as specified.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cracking bending spirally hooking ends and binding with MS wire (annealed) no less than 0.90 mm dia

Material and labourfor for Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in cement mortar 1:4 as in cover slab including all necessary form work. Exposed surfaces of concrete shall be finished even and smooth without using extra cement. (Note : Reinforcement shall be measured and paid separately under relevant items of this schedule).

Material and labour for pre- polished granite slab machine cut, in skirting/dado, steps, jambs, pillars, window cill, cooking platform etc. of any shade as approved by GE of 15 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing (Granite finish) with suitable grinding stones complete all as specified and as directed.

Making arrangement of scaffolding in buildings, cutting of small trees/plants at the stem, removal of the roots of the plants by using acids, cutting around the spot for removing the roots any size and making good with cement mortar 1:3 or with PCC 1:2:4 including finishing with existing complete all as directed by Enginner-in-charge.

Material and labourProviding and injecting chemical emulsion for post construction anti termite treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per liner meter including drilling and plugging holes etc in apron complete all as specified and directed

Material and labour for injecting at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 50mm centre to centre and sealing the same complete all as specified and directed.

Providing cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in roof levelling concrete, laid to slope for further treatment with using integral water proofing compound.(WPC shall be measured separately)

Material and labour for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding/under WPT) with WPC all as specified and directed(WPC shall be measured and paid separately)

Material and labour for Providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating Brushbond Roof Guard in 3 coats of application @ 0.5 litre/m2/coat, The Product should have following Properties: (a) Solid Content : 70 % (b) Tensile strength (ASTM D 412) : 1.10 MPa (c ) Elongation (ASTM D12): 100 % (d) Resistance to ageing due to UV radiation: 1000 hours No change (e) Rapid Chloride Penetration : Very low Resistance to Algae growth: Passes, Zero Rating/ Permeability (mm) : 5.0 (f) Water vapour transmission: 6.0 g/ m² h (g) No. of coats : 3 (minimum) (h) Adhesive bond strength : > 0.92 N/mm2 Make : FOSROC or equavalaint approved make

Dismantling plian or corrugated steel sheeting, any gauge, thickness, incl nainital or similar pattern roof coverins.

Material and labour for MS framed work such as grills,gratings, in hand rails, wind ties, posts and struts in screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410 - O or Fe 310 - O including dismantling old MS work all as specified and directed .

Material and labourfor 0.50mm thick Pre painted Galvalum aluminium zinc coating GI based corrugated steel sheet AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified.

Dismantling wall and ceiling boards any description, any thickness, including cover fillets

Supply and fixing 6mm thick non asbestos fibre cement building boards of size 595 x 595mm with PVC laminated at back side of board with GI poder coated grid work of size 600x600mm with main runner 28x19x0.70mm thick, cross tee 25x19x0.70mm and wall angle 19x15x0.70mm duly suspended with 4mm dia GI bar hangers 1200mm centre both ways from purlin/rafter from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified.

Supply only integral water proofing compound.

Material and labour for Applying bitumen blown 85/25 grade, applied hot, to concrete surfaces at the rate of 1.2kg per sqm per coat.

Supply and fixing APP based polymeric membrane minimum weighing 4kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

Material and labour for Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in filling and mass concrete

Supply and fixing in repair viterous china squatting pan 'Orissa pattern ' size 580 x 440mm white with integral foot rests incl connecting to 'P' or 'S' trap and to flush pipe antisyphonage pipe etc compete including provn of lime concerte bedding and making good to floor all as specified and directed.

Supply and fixing in repairs viterous china wash down water closet (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim all as specified and directed.

Supply and fixing in repairs PVC low level flushing cistern 10 Ltr capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as specified and directed.

Supply and fixing in repairs viterous china wash basin white flat back size 550 x 400 mm including brackets, waste coupling etc all as specified and directed

Taking out steel water tubing and connections including cleaning for refixing 15 mm dia.

All as per item No 46 hereinbefore but 20mm dia.

All as per item No 46 hereinbefore but 25mm dia.

Supply and fixing 15 mm dia galvanised steel water tubing medium grade to walls and ceiling or lying in floors.

All as per item No 49 hereinbefore but 20mm dia.

All as per item No 49 hereinbefore but 25mm dia.

Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 15 mm dia (Note: Serviceable pipe obtained from item 46 to 48 be re-used under No 52 to 54 )

All as per item No 52 hereinbefore but 20mm dia.

All as per item No 52 hereinbefore but 25mm dia.

Supply and fixing in repairs 15mm dia unplasticised PVC pipes of Pressure rating 10 Kgf/sqcm fixed complete to walls, ceilings or in floors etc, all as specified and directed

Supply and fixing in repairs 20mm dia unplasticised PVC pipes of Pressure rating 10 Kgf/sqcm fixed complete to walls, ceilings or in floors etc, all as specified and directed

Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting n.exc 10 cm girth.

Supply and fixing in repairs 15 mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe.

Supply and fixing in repairs stop valves fancy type chromium palted with long shank and cup (concealed type ) screwed for iron pipe of 15 mm bore.

Supply and fixing in repairs 20 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe.

All as per item No 60 hereinbefore but 25mm dia pipe

Supply and fixing in repairs Bib tap standard of PTMT of fancy type of any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms

Supply and fixing in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete for 15 mm bore.

Supply and fixing in repairs pillar tap with capstan heads chronium palted screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore

Supply and fixing in repairs Brass chromium plated health faucets high quality including fixing to 15mm bore steel pipe or union.

Supply and fixing in repairs Brass chromium plated 2-in-1 tap 15mm bore for fixing of health faucets.

Supply and fixing in repairs swivel shower of PTMT any colour for fixing with 15 mm pipe minimum weigth 40 gms

Dismantaling of cast iron / RCC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor/walls bore of pipe 75 mm with PVC clamps and saddles

All as per item No. 70 above but bore of pipe 110 mm

Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm

All as per item No. 72 above but bore of pipe 110 mm with access door

Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm bore

All as per item No 74 above but bore of pipe 110 mm bore

Supply and fixing PVC (SWR) reducers 110 mm bore

Supply and fixing PVC (SWR) vent cowl bore of 75 mm bore

Supply and fixing PVC (SWR) bends any radius of bore 75 mm bore

Supply and fixing PVC (SWR) bends any radius of bore 110 mm bore

Supply and fixing PVC (SWR) branch piece single Y equal or unequal of bore 75 mm bore

Supply and fixing PVC (SWR) branch piece single Y equal or unequal of bore 110 mm bore

Supply and fixing in repairs 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement

Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia 'D' type 60 cm long between flanges

Supply and fixing in repair waste coupling 32 mm dia of PTMT (half or full threaded) minium weight 45 gram.

Supply and fixing in repairs PVC flexiable pipe (Connecter) 15 mm dia, 450 mm long with check nut and bolt with washer all as specified

Supply and fixing in repairs PVC waste pipe 32mm bore for WHB/sink all as specified

Supply and fixing in repairs plastic water closet seat cover , whiteor tinted, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames).

All as per item 88 above but exceeding 1.5Sqm but not exceeding 4 Sqm each

Taking down shutters of any description not exceeding 1 Sqm each.

All as per item No 90 hereinbefore but exceeding 1Sqm and not exceeding 2 Sqm each.

Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, 2nd class HW all as specified and directed ..

Supply and fixing factory made, 2nd class hardwood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed .

Supply and fixing 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) and directed .

All as per item No 94 hereinbefore but divided into squares, with plain chamfered or rounded, mitred and ribeted sash bars any numbers as in window shutter 30 mm thick all as specified in SSR Part I Sec 8 Clause 8.24 (b).

Supply and fixing 30mm thick Flush shutter,solid core construction,with block board core and plywood face panels with commercial type on both sides complete all as specified and directed.

Material and labourfor framed work such as grills with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars etc complete conforming to Fe 310-0.

Supply and fixing Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Supply and fixing Factory Made Solid PVC Moulded Door Shutter with wood free EPS core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded pre lamimate PVC Sheet on the front face & 2mm prlaminate PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

Taking down steel windows / ventilators area n.ecx 1.5 Sqm each including all fittings and all as specified and directed.

Supply and fixing steel ventilators with top hung shutter including hinges, steel pegs, stay etc complete all as specified and directed.

Material and labour for steel windows with side hung shutters incl hinging devices and steel peg stay , complete with glazing bars dovetailed or welded all as specified and directed.

Material and labour for steel windows with side hung shutters incl hinging devices and steel peg stay , complete without glazing bars complete all as specified and directed.

Supply & fixing Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm. & fixed with wooden beads / stainless steel wire stapels and all as specified and directed.

Supply and fixing4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Supply and fixing4mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Material and labour PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in hold fast all as specified and directed .

Dismantling boarding of any description and fixed in any position fixed with nails or screws.

Supply and fixing 18/19 mm thick Block boards, grade 2 quality interior grade decorative type with decorative face veneer on one face, fixed withscrews to timber frame work for cupboard shutters, shelves and partition complete all as specified and directed

Supply and fixing in repairs Aluminium anodised hasp and staple , 125mm safety type with mild steel hinge pin hinge plate and fixed with screws.

Supply and fixing in repairs140mm size ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in.

Supply and fixing mild steel ,bright finish continious piano hinge with flap size 30mm fixed as in repair.

Material and labour for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm.

Supply and fixing in repairs MS hasp and staple , 125mm size safety type with mild steel hinge pin including bolt type.

Supply and fixing in repairs MS peg stay 300 mm long enameled black for steel windows with hindged joints etc

Supply and fixing in repairs MS Handles cast type enameled black 125 mm long for steel windows with necessary fittings

Supply and fixing in repairs Floor door stoper of alumunium alloy body and tongue, aodised with hard drawn steel spring, fixed in floor

Material and labour for servicing/ easisng of steel windows of size not exceeding 2 Sqm each including cleaning, scrapping, hacking, oiling, necessary welding, replacing broken hinges,handles ,stay etc and making good disturbed portion painting all as specified as directed by Engineer-in-charge

Supply and fix in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm and fixed with tinned tacks or galvanized wire staple

Supply and fix in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm and fixed with steel fillet in steel window by cutting out, punching the revets al as specified and directed by Engr-in-charge.

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including. Necessary new oil putty or with existing metal beadings complete.

Hacking out old broken glass panes from wooden framed shutters including. Putty/wooden beadings and supply and fix sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.5 sqm in each pane including necessary oil putty/wooden beads complete.

Supply and fixing in repairs MS 300 mm size ordinary rat tail rod pattern springs including roller and roller plate complete

Supply and fixing 150 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed

Supply and fixing 200 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed

Supply and fixing 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed

Supply & Fixing 150 mm size Aluminium handles, cast type, anodised

Supply & Fixing in repairs 125 mm size Aluminium handles, cast type, anodised

Supply and fixing Butt hinges, medium weight coldrolled mild steel and fixed 50mm size.

All as per item No 129 hereinbefore above but 100mm size

Supply and fixing in repairs mild steel powder coated pelmet rods 20 mm dia including 02 Nos of brackets, 02 Nos of finials or side brackets as per site requirement and 10 No of curtain rings in each curtain rod complete all as specified and as directed

Resecuring or easing and adjusting wooden shutters of any description area n.exc. 1 Sqm each without taking down

Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each without taking down

Material and labour for distempering walls with two coats of washable distemper oil emulsion on new surfaes over a coat of alkali resistant priming paint (white or tinted) as directed of distempered and painted surfaces as in preparatory work to give uniform and smooth finish all as specified.

Material and labour for two coats of cement based paint over a coat of primer on newly plastered surfaces of wall including necessary preparation and all as specified and directed.

Material and labourfor preparation new surfaces of wall and applying three coats of white wash on walls

Material and labour for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide on new surfaces in any tint complete all as specified.

Material and labour for preparation of wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint in any tint over a coat of wood primer on new surfaces all asspecified and directed

Obliterating old writing of any description n.exc 0.1 Sqm, with paint to match existing work

Writing letters or figures (Block, roman, Italic or Indian) not exc 30 CM high

Material and labourfor preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying one coat of white wash on walls

All as per item No 141 hereinbefore but one coat of white wash on Ceiling

Material and labour Preparation of old treated wooden surface exceeding 10 cm width and grith and applying one coat of synthetic enamel paint all as specified

Material and labour for preparation of old decorated surfaces of walls including cornices, pilasters etc (Plastered or un plastered surfaces) and applying one Coat of cement base paint complete all as specified and as directed.

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying two coat of oil bound distemper and all as specified and directed.

All as per item No 145 hereinbefore but applying one coat on old surfaces

Material and labour for 3mm thick wall putty on walls prior to any type of treatment.

Material and labour for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint on old surfaces in any tint complete all as specified.

Material and labour for preparing old painted brick or concrete surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint (Ordinary tint) all as specified and directed

Material and labour French polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old work one or more coats

Material and labour for preparation of old decorated surface of walls and applying one coat of weather coat (ACE) exterior emulsion paint all as specified and directed

Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking out old steel sink and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed.

Supply and fixing in repairs Stainless steel Plate rack 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete all as specified and directed

Supply and fixing in repair PVC water tank cover for 500 ltrs / 1000 ltrs capacity PVC water tank

Supply and fixing in repairs Rotational moulded Polyethylene water storage tank - 500 liters capacity (cylidrical vertical with double layered, threaded top cover) hoisted and fixed in position all as specified in SSR part I.

Supply and fixing in repairs 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of following sizes

Dismantling/disconnecting existing PVC water storage tanks of Capacity 500 Ltrs/ 1000 Ltrs for repairs and hoisting,reconnecting and re-fixing in same position.

BYRAVESHWARA CONSTUCTION

Sri Lakshmi Venkateswara Enterprises

shashi shekar construction