Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.1 LAccepted-AOC | ₹20.1 L | L1 | Accepted-AOC Fin.Doc.Scrutiny Note forwd By Rel.Dept to Tender Comtee.to Qly.Bidder (Rate)L1,then approved Note by Hon Comisioner DMC On Dt. attached fin.approved docs. W.O.DMC/WD/05/Dt.24/04/2026 |
| 2 | L2₹20.3 LRejected-AOC | ₹20.3 L | L2 | Rejected-AOC Fin.Doc.Scrutiny Note forwd By Rel.Dept to Tender Comtee.to Qly.Bidder (Rate)L1,then approved Note by Hon Comisioner DMC On Dt. attached fin.approved docs. W.O.DMC/WD/05/Dt.24/04/2026 |
| 3 | L3₹20.5 LRejected-AOC | ₹20.5 L | L3 | Rejected-AOC Fin.Doc.Scrutiny Note forwd By Rel.Dept to Tender Comtee.to Qly.Bidder (Rate)L1,then approved Note by Hon Comisioner DMC On Dt. attached fin.approved docs. W.O.DMC/WD/05/Dt.24/04/2026 |
Tender Value
₹20.1 L
EMD Value
₹20,073
Closing Date
28 Mar 2026, 11:00 amClosed
The Commissioner
Dhule Municipal corporation, Dhule New Administrative Building Sakri road, in front of Chhatrapati Shivaji High School, Dhule 424001
DHULE/DMC/PWD/MP Fund/ 143/1-1/2025-26 Construction of CC Road Near shivaji maharaj Statue Mahnor Taukies Dhule
2026_DMCD_1288865_1
DHULE/DMC/PWD/MP Fund/ 143/1-1/2025-26
Open Tender
Civil Works - Roads
120 days
Dhule
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,475
₹20,073
20 May 2026
20 Mar 2026
30 Mar 2026
20 Mar 2026
28 Mar 2026
20 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete. drawing etc. complete.(Weight of 5.5 Kilogram/sq.m. | 52.8 | Cubic Metre | 446.99 | ₹23,601.07 | BI01010001010000000000000515BI0100001115 |
| 2 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. | 105.6 | Cubic Metre | 12.47 | ₹1,316.83 | BI01010001010000000000000515BI0100001116 |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate,watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I(Using Screening Type A (13.2) mm Aggregate) | 52.8 | MT | 2,716.19 | ₹1,43,414.83 | BI01010001010000000000000515BI0100001118 |
| 4 | Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) | 52.8 | Cubic Meter | 6,577.73 | ₹3,47,304.14 | - |
| 5 | Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. | 105.6 | Cubic Meter | 8,192.23 | ₹8,65,099.49 | - |
| 6 | Providing and fixing in position TMT FE 500, 32 mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete. | 160 | Cubic Meter | 559.25 | ₹89,480 | - |
| 7 | Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete | 147 | Cubic Meter | 318.09 | ₹46,759.23 | - |
| 8 | Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. | 92 | Cubic Meter | 79 | ₹7,268 | - |
| 9 | Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 m One Metric Tonneo 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent
is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide | 92 | Cubic Meter | 323.28 | ₹29,741.76 | - |
| 10 | Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015). | 88 | Cubic Meter | 692.31 | ₹60,923.28 | - |
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.80 MB
BOQ_2215918.xls
BOQ • 0.31 MB
TNo102_2425_Manmadjeen_ccrd_TForm.pdf
Tender Documents • 2.91 MB
TNo102_2425_Manmadjeen_ccrd_boq.pdf
Other Document • 0.49 MB
Download all tender documents and submit your bid