SCHEDULE OF RATES AND QUANTUM OF WORKS INVOLVED FOR (INCREASING CAPACITY OF DISTRIBUTION TRANSFORMER, REPLACEMENT OF OLD AND JARJAR 02 NOS.. 11 KV I/C V.C.B. AND 04 NOS. 11 KV O/G V.C.B. AT 33/11 KV S/S AJGAIN) UNDER

Amount

Carriage of following materials from Elec. Store Center Unnao to work dump site along with loading unloading and propoer stocking.

PCC Pole 8.5 mtr long

ACSR Weasel Conductor

ABC conductor (3x50+1x35+1x16)

L.T. Cable 1x400 sq mm

Other loose line materials with including conductor, Single and double Pole accessories, complete stay & earthing, insulator, x-arm, etc.

Safe carriage of following materials from electricity store center Unnao to 33/11 KV S/S Ajgain work dump site with loading unloading and proper stocking Distance within 0-50 Km.

11 KV V.C.B. I/C CTR 600/300/5A, 350 MVA

11 KV V.C.B. O/G CTR 200/100/5A, 350 MVA

Bus Coupler

Dismentling of old V.C.B. with dragging from control room to S/S dump site.

Commissioning of new V.C.B. and making it operational after testing and cheaking it for tripping

Commissioning of new Bus Coupler including all connection as required

Making all connection of controls meter and power system.

Carriage of following Transformer from Elec. Store Center Unnao to diff. work dump site along with loading unloading and propoer stocking.

T/F 25 KVA 11/0.4 KV

T/F 63 KVA 11/0.4 KV

T/F 100 KVA 11/0.4 KV

T/F 250 KVA 11/0.4 KV

Dismantling of following Transformer from Plinth / Double Pole with Safe Carriage from work site to dump site along with loading unloading and propoer stocking.

T/F 10 KVA 11/0.4 KV

T/F 16 KVA 11/0.4 KV

T/F 25 KVA 11/0.4 KV

T/F 63 KVA 11/0.4 KV

T/F 100 KVA 11/0.4 KV

T/F 160 KVA 11/0.4 KV

Mounting of following Transformer on double pole including its cartage and dragging from dump site to pit site.

T/F 25 KVA 11/0.4 KV

T/F 63 KVA 11/0.4 KV

T/F 100 KVA 11/0.4 KV

Placement of 11/0.4 KV T/F from dump site to newly constructed T/Fs Plinth & installation and commissioning of 250 KVA T/Fs of T/F Plinth and including jumpering with the system. (All the required materials as Al. Lugs Crimping Type for 250 KVA T/F Copper L-piece 62x225x12 mm etc for above job shall be provided by contractor except T/Fs and LT PVC Cable)

Construction of T/F Plinth of size 2x2x1.5 m on a padding 0.25 M deeo in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick, brick work in ration 1:4 cement & cores sand in the hollow portion the sand should be filled from the ground level up to 15 centimeter below from the top of wall, cement, sand & brick ballasts should be filled up to 15 centimeter. Two nos. of channel 100x50 in length 1500 mm will be grouded, 0.35 CM. RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4. The T/Fs plinth should be plastered on all sides 12 mm thick in ratio 1:6 by cement and cores sand. (All the material will be arranged by the contractor)

Construction of retaining wall, fabrication & erection of Wiremesh fencing around Transformer with retaining wall & 01 nos. gate with locking arrangement made of MS Angle Iron of size 50x50x6 mm jointed with nuts and bolts. Wiremesh of size 10 swg rectangle type, its painting as per norms of RESPO. (All the materials will be arrangement by the contractor)

Earthing of Neutral of Transformer, Transformer body and double pole by way of boring and lowering of ‘B’ class G.I. Pipe 1.5” dia from ground up to the water level (Minimum 20 Mtr. Deep) with a solid cone at the lower end of G.I. pipe. Connecting and bringing out contineous G.I. Strip size 32X6 mm. from the cone to the ground surface where it will be connected with G.I. pipe clamp from which Transformer neutral, Body & D.P. connection being done by G.I. Strip.(All the materials will be arrangement by the contractor)

Erection of PCC double pole including digging of pits, fitting of all accessories along with cartage & dragging from dump site to pit site.

Making T-off arrangement including fabrication & fitting of accessories.

Grouting of PCC Pole as per RESPO Norms with grouting materials.

Earthing of pole as per RESPO Norms.

Digging of pits, fixing nuzzling and grouting of stay rods as per RESPO Norms with grouting materials.

Laying stringing and sagging of following type HT/LT Lines including all associated work with joint/jumpers and binding of insulator as required.

11 KV Line Three Phase

L.T. Line by ABC Three Phase

Fixing of 3-Phase Distribution Box with clamp, N&B (Only D.B. Box Provided By Department)

Carriage of old 11 KV V.C.B. from33/11 KV S/S Ajgain work dump site to ESC Unnao with loading, unloading and proper stocking

Recevied back old and jarjar 11 KV I/C V.C.B.

Recevied back old and jarjar 11 KV O/G V.C.B.

Safe Carriage of following T/F from work dump site to Electricity store center Unnao with loading, unloading and proper stocking.

Recevied back old T/F 10 KVA 11/0.4 KV

Recevied back old T/F 16 KVA 11/0.4 KV

Recevied back old T/F 25 KVA 11/0.4 KV

Recevied back old T/F 63 KVA 11/0.4 KV

Recevied back old T/F 100 KVA 11/0.4 KV

Recevied back old T/F 160 KVA 11/0.4 KV

M/S RATHORE ELECTRICALS

M/S NEW MAA KALYANI TRADERS