CONSTRUCTION OF BUILDING WORK (REMAINING) AT GUPS UPLAPHALA BLOCK- KHERWARA DISTRICT- UDAIPUR

PART A ( CIVIL WORK) BASED ON PWD BSR 2013 UDAIPUR CIRCLE & (Sanitary Work) Based on BSR PWD - 2013, Circle Udaipur & (Electric Work) Based on BSR PWD 2013, Jaipur Circle

Earth Work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 Mtr. Including taking out the excavated soil and depositing and refilling of Jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 mtrs. All Kinds of Soil

Random Rubble Stone masonry for foundation and plinth in cement sand mortar above 30 cm thick wall in cement sand mortar 1:6 (1 cement : 6 sand)

Providing & laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost pf centering and shuttering. All work upto plinth level using crusher broken aggregate. M-15 Grade(1:2:4) 20mm aggregate

Providing & laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar (1:3) grade M-20(1:1.5:3) 20mm aggregate (Reinforced)

Random Rubble Stone masonry super structure up to above plinth level one storey height wall above 30cm thick in cement sand mortar 1:6 mix.

Steel reinforcement for r.c.c. slab and beam : Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (Including the cost of binding wire) all complete upto floor three level. Themo mechanically treated Bars (Conforming to relevent IS: 1786)

Grading for roof water proofing treatment with cement concrete 1:2:4 with water proofing compound as per manufacture's specification

Plaster on new surface on wall in cement sand mortar 1:6 including ranking of joints etc. complete fine finished 20 mm thick.

6mm thick cement plaster to ceiling of mix 1:3 (1 cement:3 fine sand)

Polished Blue kota stone flooring skirting, laid over 20 mm thick base of CM 1:4 and jointed with grey cement slurry to match with the shade of the slab including rubbing and polishing complete : 25 mm thick slab For area of each slab from 2001 to 5000 sq.cm.

P&F T - iron / angel doors frames for doors window and ventilation of mild steel Tee-section, jionts mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size) or with wooden plug and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer (35x35x5 mm)

Providing and fixing M.S.steel double leaf shutter in angle iron frame 35x35x5mm suitabilly diagonally bracked with 35x3mm flat iron above & below lock rail of size 50x5mm beading extra including all fittings,including two coats of anti-corrosive red oxide primer paint M.S. sheet 20 S.W.G.

S/F wire guage of 14 mesh x 24 gauge to the metal frame of rolled section by nmetal beading 20x3mm with suitable screw at not exceeding 150mm distance

P/F square bars or other flat welded to windows 12 mm

Supplying and fixing of steel door, with frame of hollow metal pressed section 80X50 mm as per IS:4351 of 1.25 thick with double sheet shutter 0.8 mm thick MS sheet to spot welded and embossed with rib type design on both sides fronts sides vertical and back side horizontal and spot welded including holds fasts of (15 X 3 mm), M.S oxidized fittings such as butt hings sliding doors bolts, handles, tower bolts etc. complete in all respects as per drawing and spcification including applying priming coat of approved steel primer.

S & fixing in walls machine cut & polished stone shelves, tads and sills in CM 1:3 with machine cut edgessand or other approved stone kota stone 25 mm thick

Painting with Enamel paint of approved brand and manufacture in all shade on new steel work (2 or more coat )

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new work including prepration of base with primer putty lippy complete in all respect

Applying Birla / JK white cement based putty over cement plastered surface for making even surface.

Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1:3 as per standared design.

Copping: Providing and laying cement concrete including curingcompaction etc. complete in retaining walls, return, walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses string or lacing courses, parapets coping bed blocks anchor blocks plain windows sills, fillets etc. up to floor three level excluding the cost of centering and shuttering.M15 grade Nominal Mix ( with graded stone aggregate 20mm nominal size)

Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40mm and 10 mm thick as per approved design

Making grooves as per design in plaster 10 mm to 20 mm wide

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia.

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5. 110mm dia.

S & F in cement mortar welded hand railing made out of MS round or square bars, flats etc for staircase or verandah as per design complete in all respect with priming coat of red oxide

Providing & laying chequered coloured plain cement concrete embossed specially manufactured non slipping tiles of approved make 20 mm thick laid on 20 mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete. Specially manufacturing non slipping 9-12 mm ironite topping tiles of approved make 20 mm thick

Green Board Size 1.80x 1.50m

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. Group -2

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr..)

Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. On Board. Group-2

S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. 25 mm Dia. Group-2

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 2 x 2.5 sq. mm. + 1x1.5sqmm,Group-2.

P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. Single Pole MCB, 6 A to 32 A rating, Group-2

P & F strip type fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint) / (extruded non corrosive UV resist EP channel) complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube). 1 X 36 Watts with EB, Group-2

P & F Fluorscent tube rod in existing fixtures as required,Flourscent powder coated (minimum 3 star rating) 36/40 Watts, Group-2

P & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.1200 mm sweep, Group-2

P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required.Group-2

P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required.Group-2