(i) S&T Infringement removal and associated activity for Sainthia to Murarai 4th Line, Murarai to Gumani 3rd & 4th line and Gumani to Barharwa 3rd Line. (ii) Electronic Interlocking work at Bansloi Bridge and Kotalpukur station. (iii) 2x48F OFC and 6 quad work in between Sainthia to Barharwa in Howrah and Malda Division of Eastern Railway.

The tenderer must have minimum average annual contractual turnover of V/N or V 'whichever is less, where V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of total contractualpayments'' in the previous three financial years, as per the auditedbalance sheet. However, in case balance sheet of the previous year isyet to be prepared/audited, the audited balance sheet of the fourthprevious year shall be considered for calculating average annualcontractual turnover. The tenderers shall submit requisite informationasper Annexure-VIB, along with copies of Audited Balance Sheets dulycertified by the chartered Accountant/ Certificate from CharteredAccountant duly supported by Audited Balance Sheet. It will follow as peritem 10.2 or 17.15.2ofGCC'2022 with Advance Correction Slip with LetterNo.:2022/CEI/CT/GCC- 2022/Policy New Delhi, dated: 14.07.2022 orlatest.

Bid Capacity as per as per Para 10.3 & 17.15.3 and Annexure VI of GCC'2022 with up to date amendments.

The tenderer must have successfully completed orsubstantiallycompleted any one of the following categories of work(s)during last07(seven) years, ending last day of month previous to the onein whichtender is invited: Three similar works each costing not less thantheamount equal to 30% of advertised value of the tender, or Twosimilarworks each costing not less than the amount equal to 40% ofadvertisedvalue of the tender, or One similar work each costing not lessthan theamount equal to 60% of advertised value of the tender. It willfollow asper item 10.1 of GCC'2022 with Advance Correction SlipwithLetterNo.:2022/CEI/ CT/GCC-2022/Policy New Delhi,Dated:14.07.2022or latest.

Defination of Similar Work :- Electronic Interlocking Work {Indoor or (Indoor + Outdoor)} And/or Panel Interlocking work {Indoor or (Indoor + Outdoor)} And/or Route Relay Interlocking work {Indoor or (Indoor + Outdoor)}.

Power of Attorney on Notarized Stamp Paper.

NEFT Details as Per Annexure-T as per tender document.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

All documents in support of fulfilment of eligibility criteria with respect to completion of Similar nature of work for Technical Eligibility Criteria and Total contract value for Financial Eligibility Criteria should be furnished along with the tender and should be submitted online at the time of tender bidding.Tenders not accompanied by documentary evidence in support of eligibility criteria will be summarily rejected. No post tender communication, in any form will be made or entertained, after opening of tenders, in this regard. Railways may however call for the originals of the credentials or verification or anyclarifications/confirmations on the contents of the documents submitted.

Tenderers shall note that the submission of other supporting SCANNED documents namely-Constitution of firm/JV firm, Work in hand, Arbitration/Court cases, Tools - Plants, Technical Personnel /Man Power and Association of Railway Officers, at the time of on line bidding of tender, is important and they shallensure the same. However Railway may seek clarifications/details/documents in this regard.

The related Clauses mentioned in the Tender document will be as per the IRGCC issued on 2022 with up to date modificationsFollowing items are to be read along with schedule for interpretation of item-(I) ALL SMITHY /MASSNORY MATERIALSINCLUDING CEMENT , BOLT, BARS, ANGLES ETC. ARE REQUIRED FOR EXECUTION SHALL BE SUPPLIED BY THE CONTRACTOR.(ii)ALL SUPPLY MATERIALS FOR WHICH INSPECTING AUTHORITY HAS NOT BEEN INDICATED IN THE TENDER SCHEDULE BUT WILLBE USED FOR INSTALLATION IS REQUIRED TO BE INSPECTED BY THE RAILWAY AUTHORISED REPRESENTATIVE OF CONCERN DY CSTE/CON E.RLY. BEFORE THEY ARE EITHER PROCESSED FOR MANUFACTURE AS PERSCHEDULE OR USED DIRECTLY. (iii)THE MATERIAL TO BE SUPPLIED BY THECONTRACTOR AT DEPOT OF CONCERN SSE/SIG/CON/STORE SHOULD BE TRANSPORTED AT SITE FREE OF COST.(iv)VARNISH WHEREVER REQUIRED FOR CARPENTARY WORKS AS PER REQUIREMENT OF RAILWAY SHALL BE SUPPLIED BYTHE CONTRACTOR. (v)EVERY FORTNIGHT CONTRACTOR SHOULD SENT THE PROGRESS OF WORK TO THE EXECUTIVEAS WELL AS CSTE/CON/ER FOR KEEPING SMOOTH PROGRESS OF WORK. (vi)ALL NUTS AND BOLTS SHOULD BE ADEQUATELYGALVANISED & PERFORMANCE GURRANTEE SHOULD BE GIVEN BYTHE CONTRACTOR AGAINST RUSTING. (VII)PAYMANET WILL BEMADE AS PER ACTUAL WORK DONE ON PRO RATA BASIS. IF REQUIREDDEPTH/LENGTH/SPACE/QUANTITY (AS APPLICABLE) ISNOT AVAILABLE AT SITE. (VIII)THEVEHICLE FORSITE MOVEMENT AND WORK FOR RAILWAYOFFICIAL TO BE ARRANGED BY THECONTRACTOR. (IX)WHERE EVER SUPPLY IN SCHEDULE IS LESS THAN EXECUTION, MATERIAL WILL BE SUPPLIED BY RAILWAYSUBJECT TO AVAILABILITY IN STORE. (X)Execution of item will include all accessories to complete the execution.

In case of any dispute in between attached Tender Document and IRGCC-2022 with latest amendments upto ACS -12, the statement written in IRGCC-2022 with latest amendment will prevail.

Specification written in latest SOR of S&T issued in Feb-2026 will be followed for SOR items and latest specification of RDSO will be followed for items with RDSO specifications.