Development of Water and Amusement Park at Thenguchingjin, Imphal East under the Scheme for Special Assistance to States for Capital Expenditure in the year 2020 21 SH B Construction of Secondary Civil Components, IEI, Solar Lighting, CCTV and PA

Amount

CIVIL COMPONENTS

Welcome Gate

EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 kanhaighat Coarse sand: 10 graded stone aggrt. 40mm nominal size).

R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level(a) 1:1.5:3 (1 cement : 1.5 kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string courses,fillets,columns, pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 Kanhaighat coarse sand:3 graded stone aggregate 20 mm nominal size.)

Reinforcement for R.C.C.work including bending,binding and placing in position complete ( a ) Tor steel bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in. (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).(i) upto 4.0 m ht

from 4.0m to 5.0m ht

from 5.0m to 6.0m ht

from 6.0m to 7.50m ht

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.at height more than 6.0 m ht

(d) cronices and moulding (i) upto 4.0m ht

(ii) from 4.0m to 5.0 m ht

(iii) from 5.0m to 6.0 m ht

(iv) from 6.0m to 7.50 m ht

STEEL WORKS

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

ROOFING & CEILING

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrome primer conforming to IS 2079, welded and bolted incluiding special shape washer etc. complete. (a) Electric resistant welded tube 9 Conforming to IS : 1611 - 1979).

Steel work in single section i/c cutting hoistinh fixing in position & applying primimg coat of red lead paint (iii) in channel angles & tees

Trapzoidal Pre-painted Profile Sheet roofing of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screw with PVC washer & cap complete excluding the coat of purlins rafter & trusses.a) Pre painted Galvalume sheet(PPGL)i) Profile sheet 0.50mm/4.2 kgs/sqm

Trapzoidal Pre-painted Profile Sheet for Ridges, Gutter or valley 610 mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screw with PVC washer & cap complete excluding the coat of purlins rafter & trusses.a) Pre painted Galvalume sheet(PPGL) i) Sheet 0.50mm/4.2 kgs/sqm

Granite stone skirting over 20 mm (average) thick base of cement mortar 1 : 3 (1 Cement: 3 kanhaighat coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) Granite slab 12.5 mm slab thick Black oxide 30 x 60 cm

P/F aluminium works for doors windows , ventilators and partions woth extruded built up standard tubular sections / appropraite Z sections and other sections of approved make cinforming to IS: 733 and IS: 1285, fixed with rawl lugs and screws or with fixing clips , or with expansion hold fasteners including necessary filing up gaps at junction at top, bottom and side with required EPDM ruber / Neoprene gasket etc . aluiminium snap beading for glazing / panelling C.P brass/ satin steel screws , all complete as per architectural drawing and directions of Engineer - in charge ( glazing and panelling to be paid for seperately ) : For shutters of doors , windows & ventilators including , providing and fixing hinges / pivots and making provision for fixing of fitting whereever required including the cost of EPDM rubber/ neoprene gasket required (fitting shall be paid for seperately) anodised aluminium ( anodise transparent or dyed to required shade according to IS : 1868, Minimum anidis coating of grade AC 15 )

Designing , frabicating , testing , installing and fixing in position curtain wall with aluminium composite panel cladding with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc including C) The fastening brackets of Aluminium alloy 6005 TS/MS with hot dip galvanised withserrations and serrated washers to arrest the wind load movement , fastener , SS 316 pins and anchor bolts of approved make in SS 316 nylon seperators to prevent bi - mettallic contacts all complete required to performed as per specification and drawing the items include cost of all material & abour component , the cost of all mock ups at site , cost of all samp[les of the individuals componenets for testing in an approved laboratory , field test on the assembird working curtain wall with aluminium composite panel cladding , cleaning protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation . Base frame work for /accp cladding is payable under the reelvant aluminiums items . The contractors shall provide curtain wall with the aluminium composite panel cladding , having all the performance characteristic all complete , as per item descriptions as specified as per the approved shop drawings and as directed by the Engineer -in charge

Providing and applying plaster of paris putty of 2 mm thickness over plaster surface to prepared the surface even and smooth complete.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

C/o Compound Fencing

Decorative Fencing for a length of 209.71 Rm

EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 kanhaighat Coarse sand: 10 graded stone aggrt. 40mm nominal size).

R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level(a) 1:1.5:3 (1 cement : 1.5 kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string courses,fillets,columns, pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

RCC work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies,shelves,chajjas, lintels,bands,plain window sill,staircases and spiral staircase upto floor five level but excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including bending,binding and placing in position complete ( a ) Tor steel bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in. (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

BRICK WORKS

2nd class (local first class) brick work in superstructure above plinth level upto 1st floor level in cement mortar 1:4(1 Cem:4 kanhaighat C/Sand)

FINISHING

12mm cement plaster 1:4 (1 cement : 4 kanhaighat coarse sand).

15mm cement plaster 1:4 (1 cement : 4 kanhaighat coarse sand).

Applying one coat of cement primer of approved quality on wall surface.

Providing and applying plaster of paris putty of 2 mm thickness over plaster surface to prepared the surface even and smooth complete.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

FENCING

Providing and fixing Steel Grill by using 38x38 mm square section as main bars horizontally and vertically,connecting bars square section 25x25 mm to arrow of decorative type ( Cast Iron) readily available at Market i/c painting, priming etc complete as per direction of Engineer-in-charge( conforming to Architectural drawing No. MPHC/A-C1/293(A)

Steel Wire Fabric Fencing for a length of 740.29 Rm

EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift upto 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Filling in plinth with granular material under floors including watering ramming, consolidating and dressing complete.

CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:5:10 (1 cem :5 kanhaighat Coarse sand: 10 graded stone aggrt. 40mm nominal size).

CONCRETE WORKS

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level(a) 1:1.5:3 (1 cement : 1.5 kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string courses,fillets,columns, pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

RCC work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies,shelves,chajjas, lintels,bands,plain window sill,staircases and spiral staircase upto floor five level but excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including bending,binding and placing in position complete ( a ) Mild steel bars.

( b ) Tor steel bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in. (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels not exceeding 1m in depth.

BRICKS WORKS

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 kanhaighat coarse sand) in superstructure above plinth.

FINISHING

12mm cement plaster 1:4 (1 cement : 4 kanhaighat coarse sand).

15mm cement plaster 1:4 (1 cement : 4 kanhaighat coarse sand).

Providing and applying plaster of paris putty of 2 mm thickness over plaster surface to prepared the surface even and smooth complete.

Finishing wall weather shield paint of approved quality on new work (three or more coats) to give an even shade.

FINISHING

137 cm high fencing with angle iron post 50 X 50 X 6 mm of 1.82 m long placed at every 2.44 m apart embeded in R.C.C. columns with welded steel wire fabric 1.3 m wide rectangular mesh 75x25 mm size weighing not less 7.75 kg/Sqm fixed to posts by tying to 6.0 mm bore nibs/ Clips with G.I binding wire (cost of posts and struts shall be paid separately).

C/o Cafeteria

EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

Filling in plinth with sandy soil under floors including watering ramming,consolidating and dressing complete

CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1 cem :4 kanhaighat Coarse sand: 8 graded stone aggrt. 40mm nominal size).

R.C.C. WORKS

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level(a) 1:1.5:3 (1 cement : 1.5 kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

RCC work in in walls (any thickness), including attached pilasters, buttresses, plinth and string courses,fillets,columns, pillars, piers,abutment, posts and struts etc. upto floor five level excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

RCC work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies,shelves,chajjas, lintels,bands,plain window sill,staircases and spiral staircase upto floor five level but excluding the cost of centering, shuttering ,finishing and reinforcement (a) 1:1.5:3 (1 cement : 1.5 kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforcement for R.C.C.work including bending,binding and placing in position complete (a)Mild steel bars

(b) TMT bars.

FORM WORKS

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in.(using 12mm shuttering ply)(a) Foundation footings, bases of columns etc. and mass concrete.

(b) Columns, pillars, posts and struts (square, rectangular or polygon in plan).

(c) Sides & soffits of beams, beam haunchings, cantilevers, girders, bressummers and lintels not exceeding 1m in depth.

BRICKS WORKS

2nd class (local first class) brick work in foundation and plinth in cement mortar 1: 4 (1 Cem:4 kanhaighat C/Sand)

Half brick masonry 2nd class (local first class) in cement mortar 1:4 (1 cement : 4 kanhaighat coarse sand) in superstructure (a)above plinth.

WOOD WORKS

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position (b) Local best quality Leihao.

Providing & fixing 35 mm thick panelled glazed shutter for doors windows and clerestory windows i/c anodised aluminium butt hinges with necessary screws 1st class Uningthou wood shutter with 12 mm thick teak wood particle board

Providing 40x3mm flat iron hold fast 40cm long i/c fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding to cement concrete block 30x10x15cm 1:3:6 (1 cement : 3 kanhaighat coarsesand : 6 stone aggrt. 20mm nominal guage).

Providing & fixing M.S. round holding down or anchor bolts with nuts & washer plates complete.

P/F C.P. Sliding door bolts 300X16 mm with screws & nuts complete.

P/F Al. Tower bolts with screws & nuts complete. (a) 250x10 mm

P/F Al. Handles with screws & nuts complete. (a)125mm

P/F Al Hookes & Eyes with screws & nuts complete.(a) 150mm

Providing & fixing 40 mm X 6 mm F.B. wind ties to G.I. sheet roof with hook bolts.

FLOORING

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement: 4 kanhaighat coarse sand) including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm (Branded Double charged

Providing and laying vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS:15622 of approved make in all colours and shades in skirting ,riser of steps,over 12mm thick bed of cement mortar 1:3 (1 cement: 3 kanhaighat coarse sand) i/c grouting the joints with white cement and matching pigments etc. complete.

White glazed tiles 10 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1: 3 (1 cement: 3 kanhaighat coarse sand) finished with flush pointing in white cement.

White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1: 3 (1 cement: 3 kanhaighat coarse sand) & jointed with white cement slurry.

Granite stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 Cement: 6 kanhaighat coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete with -(a) Granite slab 20 mm slab thick (i)Jade Black 60 x 120 cm

Steel work in built up (square & hollow section) trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide chrom primer conforming to IS 2079, welded and bolted incluiding special shape washer etc. complete.

Trapzoidal Pre-painted Profile Sheet roofing of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screw with PVC washer & cap complete excluding the coat of purlins rafter & trusses.a) Pre painted Galvalume sheet(PPGL)i) Profile sheet 0.50mm/4.2 kgs/sqm

Trapzoidal Pre-painted Profile Sheet for Ridges, Gutter or valley 610 mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screw with PVC washer & cap complete excluding the coat of purlins rafter & trusses.a) Pre painted Galvalume sheet(PPGL) i) Sheet 0.50mm/4.2 kgs/sqm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special section 24x24x0.25 mm power pressed MS sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 24x24X025X600 mm with flages of 24mm and 3000 mm long, the perimeter of ceiling fixing to wall/partition with the help of rawl plugs at 300 mm centre with 25 mm long dry wall screws @ 230 mm interval, including fixing of Gypbond TM (Gypsum Ceiling Tiles) of size 600 X 600 X 8 mm as per direction of Engineer-in-charge.

FINISHING

12mm cement plaster 1:4 (1 cement : 4 kanhaighat coarse sand).

15mm cement plaster 1:4 (1 cement : 4 kanhaighat coarse sand).

15 mm cement plaster 1:3(1 cement:3 kanhaighat coarse sand)finished with a floating coat of neat cement.

Applying one coat of cement primer of approved quality on wall surface.

Finishing walls weather shield paint of approved quality on new work ( three or more coats ) to give an even shade.

Providing and applying wall putty/plaster of paris putty of 2 mm thickness over plaster surface to prepared the surface even and smooth complete.

Applying ready mixed priming coat pink primer of appd. quality on wood work.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of appd. quality in all shades on new work to give an even shade

Providing under layer for plinth protection of 75 mm thick (unconsolidated) of stone aggrt. 40 mm nominal size wall rammed & consolidated & grouted with fine sand i/c finishing the top of concrete smooth.

Providing plinth protection 50 mm thick in cement concrete 1: 3 : 6 (1 cement : 3 kanhaighat coarse sand : 6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

2nd class brick masonary 15x15cm open surface drain in c.m. 1: 5(1cem : 5 kanhaighat c/sand) i/c earth excavation 10cm bed c.c.1: 5 : 10 1cem : 5 kanhaighat c/sand :10gr.st.aggrt.40mm n/size i/c 12mm thick cement plaster 1: 3 (1cem : 3 kanhaighat coarse sand) with a floating coat of neat cement inside & outside as per standard design.

P/F20 mm thick plank as eave board with (a) Tolhao/Uchan wood

WATER SUPPLY AND SANITARY INSTALLATION

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : - (a) 1:4:8 (1 cem :4 kanhaighat Coarse sand: 8 graded stone aggrt. 40mm nominal size).

(b) 1:2:4 (1 cem :2 kanhaighat Coarse sand:4 graded stone aggrt.20mm n/size).

2nd class (local first class) brick work in foundation and plinth in cement mortar 1: 4 (1 Cem:4 kanhaighat C/Sand)

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering,finishing and reinforcement- All work upto plinth level(a) 1:1.5:3 (1 cement : 1.5 kanhaighat coarse sand : 3 graded stone aggrt. 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1:2 (1 cement :1 Kanhaighat coarse sand:2 graded stone aggregate 20 mm nominal size.)

Providing form work i/c centering & shuttering so as to give a rough finish strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for insitu reinforced concrete to and plain concrete work in. (a) Foundation footings, bases of columns etc. and mass concrete.

(b) Flat surfaces such as suspended floor, roofs landings and the like (i) floors etc. upto 200mm in thickness.

(c ) Edges of slab and breaks in floors and walls (i) Under 20cm wide

Reinforcement for R.C.C.work including bending,binding and placing in position complete (a) TMT bars.

15 mm cement plaster 1:3(1 cement:3 coarse sand)finished with a floating coat of neat cement.

Providing and fixing water closet pan (Indian type WC pan) with 10omm sand cast Iron P or S trap , 10.0 litre low level PVC flushing cistern,including flush pipe, manually controlled device(handle lever) conforming to IS:7231, with all fittings and fixtures complete ,including cutting and making good the walls & floors wherever required:White vitreous china Orissa pattern WC pan of size

Providing and fixing wash basin with CI brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:white vitreous china wash basin size 630x450 mm with a pair of 15mm CP brass pillar taps..

Providing and fixing 600 X 20 mm C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type ).

Providing and fixing 600 x 450 mm bevelled edge mirror with frame of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing 110 x 110 x 110 mm PVC plain branch of the required degree.

Providing and fixing 110 mm PVC Soil waste & vent pipes.

Providing and fixing 75 mm PVC Soil waste & vent pipes.

Providing and fixing 110 mm PVC plain bent of the required degree.

Providing and fixing 75 mm PVC Vent cowl.

Providing and fixing C.I. cover with frame for (manhole and chamber). (a) 600 X 450 mm (Heavy duty) ( 38 kg).

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings , including fixing the pipes with clamps at 1.00 m spacing .This includes joining of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge.concealed work,including cutting chases and making good the walls (a) 20mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings , including fixing the pipes with clamps at 1.00 m spacing .This includes joining of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge.External work (a) 32 mm nominal outer dia pipes.

Providing and fixing brass bib cock of superior quality.1- mm diameter

Providing and fixing brass stop cock of superior quality-15 mm diameter

P/F Brass full way G.M valve with C.I wheel of superior quality (a) 32mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube including hoisting a height of 10 m above ground level.(a) 1000 litres net capacity storage tanks.

C/o Storm Water Drain (209.71 Rm)

EARTH WORK

Earth work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead to 50 m.in Hard dense soil. (a) Lift above 1.5 m

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming & watering lead upto 50m and lift upto 1.5m.

CONCRETE WORKS

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering : -

(a) 1:4:8 (1 cem :4 kanhaighat Coarse sand: 8 graded stone aggrt. 40mm nominal size).

(b) 1:2:4 (1 cem :2 kanhaighat Coarse sand: 4 graded stone aggrt. 40mm nominal size).

BRICKS WORKS

2nd class (local first class) brick work in foundation and plinth in cement mortar 1: 4 (1 Cem:4 kanhaighat C/Sand)

15 mm cement plaster 1:3(1 cement:3 kanhaighat coarse sand)finished with a floating coat of neat cement.

(SH: Providing IEI in the cafeteria).

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with modular type switch and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Group C

Wiring for light point/power plug with 2X4mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with 1 No. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc.as reqd.

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in PVC sassing & capping etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

2X10mm2+1X10mm2 earth wire

Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.

5/6 amps switch

15/16 amps switch

3 pin 5/6 amps socket outlet

6 pin 15/16 amps socket outlet

S/F brass batten/angle holder i/c connection etc.as reqd.

SITC surface mounted LED Down Lighter with white powder coated Al. housing with integrated electronic driver EN DURANEOHESURFACEDLS15W LED 8575 complete with connection as rqd. (Havell's)

Installation of exhaust fan upto 450mm sweep in the existing opening i/c making the hole to suit the size of the above fan,making good the damaged, connection testing commissioning etc.as reqd.

S/F 12"(305mm) dia light duty exhaust fan complete with all accessories

S/F 400mm dia wall mounting fan complete with all accessories tec. As reqd.

S/F 12W LED bulb.

SITC 50W LED 5000K energy saving IP 65 Flood Light luminaries with high power COB LED as light source Havell's JETACOMPECT OF 50W LED 757LTG complete with connection as rqd. (Havell's)

P/F (following capacity TP & N) dis-connctor fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel, making connection as reqd. 100 amp. TP & N.

S/F bus bar chamber with 4 strips copper bus bar length 600mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the body etc.as reqd.

S/F wall/floor mounted metal board of welded constn.fabricated with minimum 50mm X 50mm X6mm angle iron frame work with horizontal and vertical intermediate members of suitable angle/flat iron for mounting of switch gear i/c painting etc.

S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way

S/F 5 amp to 32 amp rating 230V 'C' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

Supplying & installation of dry powder(Stored Pressure) fire extinguisher suitable for fires involving combustible lide wood, paper, cloth etc. capacity: 4 kg (ISI marked).

Supplying & installation of carbon dioxide type fire extinguisher suitable for fires involving materials like oil, electric & delicate machineries) capacity: 4.5 kg (ISI marked).

Earthing with copper plate 600x600xmm thick i/c accessories and providing masonary enclosure with copper plate having locking arrangement and watering pipes etc.(but without charcoal and salt complete as reqd.)

Extra for using salt and charcoal for G.I.plates or copper plate earth electrode as reqd.

P/F 4.00 mm dia copper wire on surface or in recess for loop earthing as reqd.

P/L 25 mm2 4 - core pvc ins.(heavy duty) Al. cond. armoured cable of 1.IKV grade in size not exceedng 250mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

(SH: Providing IEI in the Well Come Gate).

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5mm2 FR PVC insulated copper conductor single core cable in presto plast cassing and capping with modular type switch and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc.as reqd.

Group A

Group B

Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) FR PVC ins.cu.cond single core cable in presto plast casing & capping etc.as reqd.

2X2.5mm2+1X2.5mm2 earth wire

2X4mm2+1X4mm2 earth wire

SITC surface mounted LED downlighter with white powder coated Al.housing with intrgrated electronic driver 15 W 840 LHEAAGPIA2W012 complete with connection etc as reqd.(Havell's)

S/F (following way) single pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar, hinged front sacrylic cover for the MCCB knobs detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/Isolator) (a) 2+6 way single door

S/F 5 amp to 32 amp rating 230V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.as reqd. (a) Single pole

Supplying & fixing (following rating) double pole 240V isolator in existing MCB DB complete with connection testing & commissioning as reqd. (a) 40 amp

P/F 300x450x60mm(n/size) with permissible variation of plus minus 5mm in size wooden board complete with locking arrangement and painting etc.

P/L 4mm2 twin core pvc ins.(heavy duty) Cu. cond. armoured cable of 1.IKV grade in size not exceedng 25mm2 direct in ground i/c excavation, sand cushioning protective covering and refilling the trench etc.as reqd.

(SH: Providing Solar Compound Lighting).

Solar LED street lamp All-In-One with in built SCC system wattage of 30 W of make Crompton Greaves Ltd.code no CSADEMP25/30CDL, 140 Lumen/ Watt high efficiency crystaline solar SPV panel

(SH: Installation of CCTV Camera).

Supply and fixing Hikvision PTZ IP Camera DS-2DE4225IW-DE

CP-PLUS COSMIC 4 CHANNEL NVR 1080P

4G SIM Router

Toshiba 1TB HDD

Supply and drawing (following pair) 0.5mm2 FR PVC insulated copper conductor unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as reqd.

(SH: Installation of PA System)

SITC of Power Amplifier 2000 watt AHUJA LXA200 i/c all accessoeies as reqd.

SITC Mixer Amplifier (AHUJA SSA 250M) i/c all accessoeies as reqd.

SITC Wireless Microphone Black AHUJA AWM-520V2 i/c all accessoeies as reqd.

SITC of Wire Microphone i/c all accessoeies as reqd.

SITC of 8.om, 250 watt Speaker (AHUJA) i/c all accessoeies as reqd.

SITC of Horn Speaker(SUH-40XT AHUJA) i/c all accessoeies as reqd.

Supply and drawing (following pair) 0.5mm2 FR PVC insulated copper conductor unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as reqd.

Andy Pamei

Irom Khogen Singh