Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAdmitted-Finance | ₹24.5 L | L1 | Admitted-Finance |
| 2 | L2₹26.7 LAdmitted-Finance | ₹26.7 L | L2 | Admitted-Finance |
| 3 | Rejected-Technical HOUSE NO 99 3RD FLOOR SK JAIN BUILDING KALIBARI ROAD DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | - | - | Rejected-Technical Does not fulfils NIT criteria as affidavit not found enclosed hence rejected. |
| Sl No | Description | Qty | Unit | J C DUTTA L2 | das enterprises L1 |
|---|---|---|---|---|---|
| 1.00 | M&L of taking out carefully without damaging existing unserviceable pressure filter of capacity 10000 GPH by removing all water supply inlet and outlet connections/ valves, taking out filter media and spreading/ dumping not more than 500 mtr including shifting and depositing the pressure filter complete alongwith all relevent mountings and accessories to MES Store yard located approx 2 km with the help of hydra and vehicle for further disposal action and complete all as directed.
Note: The reqd manpower, tools and plants, transportation etc included in the quoted rate. | 1 | Each | 22,200 ₹22,200 | 18,000 ₹18,000 |
| 2.00 | Supply, install, testing and commissioning of multigrade pressure sand filter having capacity of 10000 GPH consisting of one vertical cylindrical Mild steel pressure vessel with dished ends. Pressure gauges at inlet and outlet, sample cock, MS Face Piping, CI butterfly valves alongwith all accessories with initial charge of filter media, painting inside with epoxy paint and outside painting with two coats of synthetic enamel paint over two coats of red oxide primer . The detailed technical specifications are as under :-
(a) Flow rate : 10000 GPH
(b) Vessel Dia : 2800 mm
(c) Vessel Height : 1600 mm
(d) Shell sheet Thickness : 08 mm
(e) Dish thickness : 10 mm
(f) One set of 100mm dia nominal bore frontal mild steel pipe for inlet, oulet, backwash and rinse Iine
(g) Butterfly valve of 100mm dia : 5 Nos.
(h) Pressure gauges 0 to 07 Kg/ Sqm | 1 | Each | 22,65,000 ₹22.6 L | 21,05,000 ₹21.1 L |
| 2.01(i) Filter media. graded media of Particle size as given below shall be filled in layers as per design:- (i) Antracite - 1.4 - 1.5 mm (ii) Sand - 0.4 - 0.8 mm (iii) Sand - 1.02 mm (iv) Gravel - 2.0 -3.15 mm (v) Gravel - 3.15 to 5.6 mm Note:- (i) Design / drawing of the multigrade pressure sand fiter showing the dimension is to be obtained from the authorised OEM Supplier and is to be got approved trom Accepting Officer before placing final order to the manufacturer. (ii) Warranty and test certificates shall be submitted by the contractor to the department. (iii) Necessary foundation as per OEM, erection cost, testing, commissioning & transportation is deemed to be included in the quoted rate. | |||||
| 3.00 | Supply and fixing for 100 mm dia DI. resilient (soft) seated gate valve with pocket less body, ss stem (AISI 410), epdm coated di wedge 100% vaccum tight design with toroidal sealing rings and over 250 micron epoxy coating in PN16 designed to BS:5163/IS:14846 non-rising/rising stem type with hand wheel operation with flanges if required and connnection with existing pipeline with flanges or thread work etc including taking down old unserviceable one complete all as specified and as directed. | 2 | Each | 12,300 ₹24,600 | 10,000 ₹20,000 |
| 4.00 | Supply and fixing for 50 mm dia DI. resilient (soft) seated gate valve with pocket less body, ss stem (AISI 410), epdm coated di wedge 100% vaccum tight design with toroidal sealing rings and over 250 micron epoxy coating in PN16 designed to BS:5163/IS:14846 non-rising/rising stem type with hand wheel operation with flanges if required and connnection with existing pipeline with flanges or thread work etc including taking down old unserviceable one complete all as specified and as directed. | 2 | Each | 12,300 ₹24,600 | 10,000 ₹20,000 |
| 5.00 | M&L for Carrying out Labortary analysis water sample test of treated/untreated drinking water in respect of Bacteriological, Chemical and Physical property and the report to be submitted to department same as received from labortary. Note:- The Labortary test shall be carried out at RRL Jorhat/ Govt testing lab in Kohima/ Nagaland/any Govt college of Nagaland and as directed by Engr-in-Charge. Water sample to be collected in glass bottle duly sealed and stamped, bottle shall be provided by the contractor. | 1 | Each Job | 2,500 ₹2,500 | 3,000 ₹3,000 |
| 6.00 | Supply and lay in repairs GI tubing of 50mm dia, ISI Marked conforming to IS 1239 Part-I 2004, ,medium grade galvanised with all fittings specials such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc fixed complete to walls and ceilings or laid in floors omplete all as specified and as directed. | 15 | RM | 1,425 ₹21,375 | 1,000 ₹15,000 |
| 7.00 | Supply and lay in repairs GI tubing of 100mm dia, ISI Marked conforming to IS 1239 Part-I 2004, ,medium grade galvanised with all fittings specials such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc fixed complete to walls and ceilings or laid in floors omplete all as specified and as directed. | 15 | RM | 1,620 ₹24,300 | 1,100 ₹16,500 |
| 8.00 | M & L for Automatic compact applicator for bleaching sticks/ chlorine refills of the following specifications:-
(i) Multi-cavity 100 L water treatment station with proportional dose adjustment option.
(ii) Diaphragm-free, tube based self-priming fluid delivery to prevent air / vapour locks and dry run problems.
(iii) Prime loss : Zero.
(iv) Agitator free system to prevent environmental corrosion.
(v) Fluid release upto 5 LPH independent of back pressure upto 7 Bars.
(vi) Erosion enabled system for controlled release of chlorine with accurate output reproductivity.
(vii) Integrated plug & play system operating on single phase 230V 50 Hz power source.
(viii) Chlorine tablets contained in plastic cylindrical sealed disposable sanitiser refill (dia 2.5 inches+/- 0.5 inches, Height 10 inches +/- 0.5 inch) for disinfection of drinking water with arrangement for controlled release of disinfactant in water, suitable for operation through dosing system- set of 25 (1 set).
Notes: (a) Necessary accessories incl electric and water connection into existing system is incl in the quoted rate.
(b) Cost of the missed out item which os required for satisfactory operation has deemed to be included in unit quoted rate. | 1 | Each Job | 2,90,000 ₹2.9 L | 2,50,000 ₹2.5 L |
Updated dates
Tender Value
₹24.5 L
EMD Value
₹49,000
Closing Date
20 May 2026, 6:00 pmClosed
COL AMIT CHAUBEY
HQ 137 Wks Engr PIN 914137 c/o 99 APO
SPL REPAIR FOR REPLACEMENT OF BER PRESSURE FILTER OF CAPACITY 10,000 GPH AND CONNECTED WORKS AT ZAKHAMA MIL STN
2025_MES_742244_3
8104/E8
Open Tender
Civil Works
180 days
Zakhama
As per tender docu
6 documents required · 6 mandatory
₹500
AGE (I) Zakhama
₹49,000
16 Jun 2026
22 Apr 2026
27 May 2026
22 Apr 2026
20 May 2026
6 May 2026
Supply, install, testing and commissioning of multigrade pressure sand filter having capacity of 10000 GPH consisting of one vertical cylindrical Mild steel pressure vessel with dished ends. Pressure gauges at inlet and outlet, sample cock, MS Face Piping, CI butterfly valves alongwith all accessories with initial charge of filter media, painting inside with epoxy paint and outside painting with two coats of synthetic enamel paint over two coats of red oxide primer . The detailed technical specifications are as under :- (a) Flow rate : 10000 GPH (b) Vessel Dia : 2800 mm (c) Vessel Height : 1600 mm (d) Shell sheet Thickness : 08 mm (e) Dish thickness : 10 mm (f) One set of 100mm dia nominal bore frontal mild steel pipe for inlet, oulet, backwash and rinse Iine (g) Butterfly valve of 100mm dia : 5 Nos. (h) Pressure gauges 0 to 07 Kg/ Sqm
Supply and fixing for 100 mm dia DI. resilient (soft) seated gate valve with pocket less body, ss stem (AISI 410), epdm coated di wedge 100% vaccum tight design with toroidal sealing rings and over 250 micron epoxy coating in PN16 designed to BS:5163/IS:14846 non-rising/rising stem type with hand wheel operation with flanges if required and connnection with existing pipeline with flanges or thread work etc including taking down old unserviceable one complete all as specified and as directed.
Supply and fixing for 100 mm dia DI. resilient (soft) seated gate valve with pocket less body, ss stem (AISI 410), epdm coated di wedge 100% vaccum tight design with toroidal sealing rings and over 250 micron epoxy coating in PN16 designed to BS:5163/IS:14846 non-rising/rising stem type with hand wheel operation with flanges if required and connnection with existing pipeline with flanges or thread work etc including taking down old unserviceable one complete all as specified and as directed.
M&L for Carrying out Labortary analysis water sample test of treated/untreated drinking water in respect of Bacteriological, Chemical and Physical property and the report to be submitted to department same as received from labortary. Note:- The Labortary test shall be carried out at RRL Jorhat/ Govt testing lab in Kohima/ Nagaland/any Govt college of Nagaland and as directed by Engr-in-Charge. Water sample to be collected in glass bottle duly sealed and stamped, bottle shall be provided by the contractor.
Supply and lay in repairs GI tubing of 50mm dia, ISI Marked conforming to IS 1239 Part-I 2004, ,medium grade galvanised with all fittings specials such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc fixed complete to walls and ceilings or laid in floors omplete all as specified and as directed.
Supply and lay in repairs GI tubing of 100mm dia, ISI Marked conforming to IS 1239 Part-I 2004, ,medium grade galvanised with all fittings specials such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc fixed complete to walls and ceilings or laid in floors omplete all as specified and as directed.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
TENDERDOCU3.pdf
Tender Documents • 1.35 MB
BOQ_852809.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid