Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.4 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹26.0 L+₹80,869 (3.21%)Rejected-Finance 239 PHASE 2 MODEL TOWN BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than the lowest bid |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
12 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER (WEST)
KABIR ROAD JALANDHAR CANTT
WELCOME MAINT TO OFFRS ACCN, CERTAIN REPAIR TO OFFRS MESSES, PERTAIN TO B3 AREA OF AGE B/R-II UNDER GE (WEST) JRC
2023_MES_603242_1
GE/JAL(W)-32/2023-24
Open Tender
Civil Works
Item Rate
335 days
JALANDHAR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER (WEST)
₹60,000
Yes
7 Aug 2023
14 Jun 2023
19 Jul 2023
14 Jun 2023
12 Jul 2023
30 Jun 2023
Amount
M&L preparation of old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, mouds moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed
All as per ser item No 1 above but on ceiling in lieu of wall complete all as specified and as directed
M&L preparation of old distempered surface of wall, pillasters cornices etc by washing rubbing down & stopping etc and applying one coat of oil emulsion distemper complete all as specified and as dirceted
M&L preparation of old distempered surface of wall, pillasters cornices etc by washing rubbing down & stopping etc and applying two coat of oil emulsion distemper complete all as specified and as directed by Engineer-in-Charge.
Complete removal of existing treatment on wall and applying Two coat of oil emulsion distemper (white) on one coat of putty filling on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of old surface of wall by removing greasy spot and applying one coat of cement base paint on walls etc complete all as specified and as directed by Engineer-in-Charge.
M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complee all as specified and as directed
M&L prepartaion of old painted surfaces of steel and iron work of any description over 10 width or girth and applying one coat of synthetic enamel paint comlete all as specified and as dircected by the Engineer-In-Charge
Dismantling of brick tiles single layer as in roof covering complete all as specified
Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) all as specified.
Roughning for old concrete surface/floor by picking, weeping clean and washing with down with water to remove dust including brushing neat cement slurry with 3.00 Kg of cement per sqm etc.
M&L for PCC 1:2:4 type B-1 as roof padding concrete to bring the existing slab in slope of 1:40 complete all as specified
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20kg per sqm incl cleaning surfaces complete all as specified
M&L for fixing APP based polymeric membrane minimum weighing 3.6kg/sqm and min 3mm thick reinfirced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application
M&L 40mm thick brick tiles laid cement mortar bed 1:6 , 15 mm thick and joints grouted flush mortar 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.
-dittio - but except tiles.
M&L Flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified.
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, benching rounded or chamfered on edges complete.
Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete.
M&L PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement.
Demolition of cement Concrete(unreinforced) of any description and in any position not otherwise specifically provided for (below or above ground level) or as in sunken complete.
M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded stone aggregate) as in foundation filling & mass concrete as in sunken floor.
M&L for 25mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate as in sub floor.
M&L PCC (1;2:4) type B-0 using 12.5mm graded stone agregete as in sides of rounded or chamfered on edges of sunken floor/parapet walls etc
S&F 500 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including ball valve high pressure PTMT of bore dia of pipe 20mm with epoxy coated aluminum rod high density ball and dismantling of tank complete all as specified and as directed by the Engineer-In- Charge.
All as per ser item No 25 above but 1000 ltr capacity complete all as specified and as directed
Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 15 mm dia bore complete all as specified and directed.
Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 20 mm dia bore complete all as specified and directed.
Refixing only 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.
S&F 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.
Refixing only 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.
S&F 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc.
Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth.
S&F in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15mm dia bore complete all as specified and as directed
S&F in repairs15mm bore cast copper alloy chromium plated fancy type wall mixer tap for cold & hot complete all as specified and directed
S&F in repairs 15mm dia bore stop cock /Angle valves cast copper alloy chromium plated fancy type with long shank & cup complete all as specified and as directed.
S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed
S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed
S&F in repairs vitreous china wash down water closet (Pedastal pattern) 'white (excluding flushing cistern and flush pipe ) including connection todrain or out going pipe and to flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed
S&F in repairs brass chromium plated jet/health faucet for pedestal pattern water closet including PVC flexible pipe alongwith complete necessary fittings all as specified and directed by the Engr- in- Charge.
Supply & fix in repair water closet seat cover, white closed pattern with flat bottm & cover for EWC complete all as specified and as directed
S&F in repair vitreous china wash hand basin (pedastal pattern) white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed .
S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed
S&F in repair 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed
S&F in repairs 15mm dia bore cast copper alloy chromium plated fancy type mixer pillar tap for cold & hot water complete all specified and as directed
S&F in replacement 32mm dia PVC waste pipe for WHB complete all as specified and as directed.
S&F 32mm dia waste fitting brass chromium plated for basin with long screwd shanks and fly nuts flange end bedded in red lead cement and other end fixed
S&F in repairs coloured PVC toilet cabinet of size 440x325x120mm with looking mirror in replacement of existing looking mirror/wooden cabninet and repairing the disturbed surfaces to match with existing.
S&F in repair for pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete all as specified and directed
S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915mmx460mm & bowl size 410mm x330mmx160mm complete all as directed by the Engineer-in-Charge
S&F in repair brass chromium plated tubler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as dirceted
S&F as in repair Brass chromium plated shower rose 125mm complete.
S&F 4mm thick superior quality shelves (corner), made of transparent toughened glass, size 30x30cm complete all as specified and as directed.
S&F in repairs stainless steel toilet paper holder with gutties and steel screws on walls as directed and approved complete all as specfied
S&F stainless steel soap dish complete all as specified
S&F 4mm thick superior quality straight shelve , made of transparent toughened glass, size 60cm long complete all as specified and as directed.
S&F towel rack 24 inch CP type with all fittings and fixed to walls complete all as specified.
S&F in repairs Chromium plated grating 100/125mm dia circular of approved make and fixing with cement mortor 1:3 on Nahani trap or floor trap.
S&F epoxy powder coated pelmet rods of mild steel with and including pair of brackets complete fixed as in repair.
S& F 1mm thick Stainless steel hollow curtain rod with brackets and side doom fixed with all necessary drilling/fixing wooden/plastic cleats in wall complete all as specified and directed.
Taking down cement plaster on brick wall suface raking out joints hacking for key scrubbing down with water complete all as specified and directed
M&L rendering 15mm thick in cement mortar 1:4 (upto triple storey) on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as directed by the Engineer - In- Charge. Note :- The quoted rate shall incl rate for scaffolding & other neccessary arrangements for working upto triple storey.
M&L rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling/chajja etc upto triple storey and finishing the surface even and smooth without using extra cement. Note :- The quoted rate shall incl rate for scaffolding & other neccessary arrangements for working upto triple storey.
M&L renderig 15mm thick cement mortar 1:6 on other than fair faces of brick or concrete surface of wall rendering is to be finished even and smooth with out using using extra cment
M&L for preparing new plastered surfaces of ceilling and applying 3 coats of white wash.
M&L Preparation of new surface of wall with Birla putty filling on plastering surface and applying two coat of oil emulsion distemper white or printed on walls.
M&L preparation of new surface of wall and aplying two coat of cement base paint complete all as specified and directed
Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed
All as per ser item No 70 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick complete all as specified and directed.
M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and directed
All as per ser item No 72 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick
M&L glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and as directed
M&L for 20mm thick granite slab, machine cut, well polished, bedded in 15mm thick in CM 1:4 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc. complete all as specified and directed.
S&F in repair PVC floor trap size 75/100mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed
Taking chowkhat or frame with shutters (with out out taking off the shutter from the frame ) n. exc 1.5 Sqm each complete all as specified and as directed.
All as per ser item No above but exc 1.5 sqm but ont exc 4 Sqm each
Taking down shutter refixing after easing, adjusting area exc 1 Sqm but not exc 2 sqm each complete all as specified.
Taking down shutter area exc 1 Sqm but not exc 2 sqm each complete all as specified.
Dismantling plain corrugated asbestos /translucent sheet in roof covering incl ridge.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified
Dismantling structural steel work including doors, gates, flats and MS round bars but excluding framed truss etc.
S&F Rolled mild steel section as in joist, chanel, angle, or tee section fixed independently without connecting plates, etc (cut to ordinary length i,e within 20mm of the length indicated) of Fe-410w(Gde-E-250) quality A complete all as specified an directed
M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundationns filling and mass concrete all as specified and directed.
S&F steel window 1.25mm thick box type ERW hollow P section of size 60mm x25mm single rebated comprise of gauged skelton shutter ERW size 50mmx20mm and 1.25 mm thick with two openable leaf consisting two Nos sash bars of T- section 20mmx3mm welded to frame with one vertical mullion of ERW box type T- section of size 60mmx25mm and 1.25 mm thick including cutting holes and making good dismantled portion with PCC (1:2:4) type B-1 (four Nos for each window)including following fittings weled to frmae shutter:- (a) Hold fast 150mm long of 12mm x3mm made to shape -04 Nos per window. (b)Handle of z section 20mmx25mm, 100mm long - 01 Nos per leaf. (c) MS Tower bolt 150mm long -02Nos per leaf. (d) Z-section 20mmx25mm 100mm long 01 Nos per leaf.(e) MS pintol hinges of size 75mmx12mm-02 Nos per leaf. Note :(i) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (ii) Wire mess and painting shall be measured and paid separatly under respective items.
All as per item No 86 and above but window with glazed shutter. Note :(i) Fabrication & fixing shall be as per drg No CEJZ/TD-06/07 (ii) Glass panes and painting shall be measured and paid separatly under respective items.
S&F mild steel work as in as in grill gratings, door frames, gates etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and as directed.
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed ® size 125x 60 mm
S&F pressed steel door frame with one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x60mm
M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in pressed steel frame, hold fasts and similars articles
S&F 35mm thick locally fabricated Plain framed panelled shutter (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated 35mm thick.
S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 35mm thick second class hard wood locally fabricated glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I para 8.24(A)
S&F mild steel framed work such as door/cupboard frame, etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer and cutting holes/making surface good in cement concrete 1:2:4 type B-0 complete all as specified.
M&L PVC 19/20mm cupboard shutter one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified
S&F solid PVC door frames of size 50mmx47m made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification and drawing
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a VC sheet strip of 20mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rails & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame weled/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing
M&L 18/19mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified
S&F continuous piano hinges mild steel bright finish of flap width 30mm
S&F 40m dia cup board knobs fixed with nut , screw and washer of brass polished
M&L Hasp and staple safety type aluminum anodised 75mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified
S&F 100mm butt hinges, mild steel medium weight cold rolled and fixed
S&F 75mm butt hinges, mild steel medium wt cold rooled and fixed
S&F 300 mm long aluminium alloy, anodized sliding door with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified.
S&F 150mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked.
S&F aluminium anodised barrel tower bolt of extruded section of 200mm size
S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed
Supply& Fix sheet glass ordinary quality 3mm thick n, exc 0.5 sqm in each pane including hacking out old broken glass complete all as directed
S&F Figured glass pin head type glazed with oil putty in squre n-exc 0.5 Sqm in Each pane 4mm thick .
Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer.
Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified
S&F anodized aluminium frames with powder coating (minimum thickness of powder coating 50 micron) for sliding doors, windows, ventilators etc with one or more rebates including jointing cleat for fixing etc.complete all as specified and specified.
S&F anodised aluminium door shutter with powder coating (minimum thickness of powder coating 50 micron) aluminium sections weighing not less than 1.00 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised aluminium hinges, snap beading, screws,etc complete all as specified
S&F anodised aluminium window(Sliding or side hung shutter) and ventilator shutters, with powder coating (minimum thickness of powder coating 50 micron) side hung/ sliding type without sash bars, aluminium sections weighing not less than 1.0 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100mm long (2 no.) suitable handle (1 no.) complete all as specified.
S&F Sheet glass 5.5 mm thickness, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
Ditto, but exc 0.5 sq. m in each pane
Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.
S&F brass mortice lock of 2 levers, vertical type, size 100 mm complete all as specified and directed.
S&F 10 mm thick and above plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified.
S&F anodised aluminium grills (anodised transparent or dyed to required shade according to IS:1868 with anodic coating grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre, including cuttung the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all as per requirement and direction of Engineer-in-Charge.
Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excludding precast concrete articles all as specified.
M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius with built in cement mortar 1:6 all as specified.
All as per serial item No 123 above but except brick all as specifed
M&L for uprooting of trees, grass, bushes etc from brick wall/roof surface/or any other surfaces of building incl dismantling the req brick work/roof tiles/mud concrete etc for uprooting the vegetation etc and make good the same to match with exixting surface with same material or concrete (1:2:4) type B-1 after pouring the chemical (which destroy the growth of vegetation to the place where vegetation removed). The rate shall include for scaffoldingor any other arrangement required during this process upto 10 mtr height complete all as spd.
M&L for repairing of RCC projection of chhajjas, roof, facia etc at any height upto triple storey by demolition of damaged portion including scraping, cutting, cleaning exposed reinforcement and providing cement concrete (1:1.5:3) type A-1 using 12.5mm graded crushed stone aggregates and reinforced with welded mesh weighing 2 to 3 kg per Sqm as per requirement and finishing the surfaces even and smooth with cement and sand mortar (1:3), 5 mm thick, the thickness of projection to be repaired shall be 70mm to 80mm including necessary formwork and finishing the surfaces to match with the existing complete all as specified and as directed by Engr-in-Charge. (Note: Including chicken wire mesh. The same shall be paid separately)
S&F Chicken wire mesh of size 12.5 mm and dia of wire 0.51 mm (24 SWG) hexagonal construction, stretched firmly complete all as specified and directed.
Demolition and breaking up drain pipes 100 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
Demolition and breaking up drain pipes 75 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors complete.
S&F 110 mm PVC (SWR) bends/tee any radius provided with access door.
S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors complete.
S&F 75 mm PVC (SWR) bends/tee any radius provided with access door.
S&F false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content not less than 2% humidity resistance of 99%. NRC 0.50 to 0.75 as per IS 8225 :1987, non-combustible as per BS 476 (Part-4)- 1970 and light refletance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per Sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000mm, cross- T size from 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per Sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasterners, 6 mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directionss of the Engr-in-Charge
Material and labour for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surface and applying two coats of exterior emulsion paint over wall primer as per manufacturer's instructions complete all as specified and as directed.
Material and labour for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surface and applying two coats of interior plastic emulsion paint over wall primer as per manufacturer's instructions complete all as specified and as directed.
M&L 1 mm thick wall care putty on wall complete all as specifed and directed.
S&F Wall mixer with telephone shower arrangement, connecting legs and wall flange but without crutch & telephone shower. CAT No : QQP-7217PM (Make : Jaquar)
S&F Sink mixer with short swinging spout (Wall mounted model) with connecting legs & wall flanges. CAT No- QQP-7307PM (Make : Jaquar)
S&F Single lever Basin with popup waste with 450 mm long braided Hoses. CAT No : COP-051BPM (Make : Jaquar)
S&F Bib Cock with wall flanges. CAT No : FUS 29037 (Make : Jaquar)
S&F Angular stop cock . CAT No : CQT 23053 (Make : Jaquar)
S&F Pillar cock . CAT No : CON - 011KN (Make : Jaquar)
S&F Long body bib cock with wall flange . CAT No : CON - 107KN (Make : Jaquar)
Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors
Taking down unserviceable Submain of any size as directed by Engineer-In-Charge.
Taking down main switch / DB as directed by Engineer-In-Charge.
M&L for point wiring with PVC insulated, unsheathed cable single core multistranded copper conductor FRLS cable 1.5 sqmm size, 1100V grade, drawn into and including PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLS conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.6 mm thick with 3 mm thick laminated bakelite sheet one light / fan / call bell point controlled by one, one way switch.all as specified. One light / fan / call bell point controlled by one, one way switch.
One 3 pin socket out let 5 Amps on same board with other switches.
One 3 pin socket out let 5 Amps on Independent board with other switches.
Ditto all as per item No.148 about but with 2.5 sqmm multistranded copper multistranded conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board
S & F switch MODULAR 6 Amps, flush button type, SP, one way, 230 Volts, AC
S & F switch MODULAR 16 Amps, flush button type, SP, one way, 230 Volts, AC
S & F socket out let multipurpose MODULAR 5 pin 6 Amps, flush type, 230 / 250 Volts
S & F socket out let multipurpose MODULAR 5 pin 6/16 Amps, flush type, 230 / 250 Volts
S & F MODULAR fan regulator step type 120W, 02 module complete all as specified and directed.
S & F MODULAR Bell Push 06 Amp 01 module complete all as specified and directed.
S & F switch Piano 5 Amps, flush button type, SP, one way, 230 Volts, AC
S & F socket out let multipurpose 5 pin 5 Amps,230 Volts
Supply and Fixing stepped socket type electronic fan regulator and connecting up complete all as directed by Engineer-In-Charge.
M & L Bell ding dong type AC 230 V complete all as specified and directed.
M & L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified.
M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.
M & L for sub main wiring with two single core PVC insulated and unsheathed cable 4 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of 20mm in size complete with all accessories alongwith provn of 4 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.
M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.
M & L for sub main wiring with four single core PVC insulated and unsheathed cable 10 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC concealed conduit of suitable size complete with all accessories alongwith provn of 2 run of 10 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.
Supply and fix MCB DB, TPN 6 way double door Vertical type suitable for mounting of MCCB as incomer with suitable 200 amps rated bus all as specified and directed.
Supply and fix MCCB 63 Amps 4 pole 415 Volt,25 KA breaking capacity .
Supply and fix MCB DB, TPN 4 way double door with suitable 200 amps rated bus all as specified and directed.
Supply and fix MCB TPN 40 Amps 415 volts complete all as specified and directed.
Supply & fix in repair MCB DB SPN with 200 amps rated Bus Bar suitable for MCBs 8 way all as specified and directed by Engineer -in-Charge.
Supply & fix MCB SPN 32 to 63 Amps 240 volts
Supply & fix MCB SP 6-32 Amps 240 volts
Supply and Fixed single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20A complete all as specified and directed.
S&F in replacement LED tube light fitting 20W Box type including LED lamp 22 W with 2200 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.
S&F LED mirror light 10Watt 2 feet complete all as specified and directed.
Supply and fixed LED Decorative wall light complete with fitting & fixtures of cap 10 Watt all as specified and directed.
Supply & fixing in replacement LED Bldg security light fitting 35 Watt including LED lamp pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50 mm 3 core including GI pipe 32mm light grade 0.9 Mtr long bent to L shape in 02 Nos of GI Clamps of size 25x6 mm of length 25mm with nuts, bolts and washers complete complete all as specified and directed.
Taking down existing Ceiling fan/Exhaust fan capacity/type carefully and refixing the same complete all as specified and directed.
Taking down existing Geyser any capacity/type carefully and refixing the same with replacement of PVC connection/Steel connection and anchor fastener , PVC (Hot & Cold) water pipe if required complete all as specified and directed.
Taking down existing electric/electronic energy meter any capacity/type carefully all electric wire/submain complete and refixing the same, incl electric connection with new gutties/anchor fastener if required complete all as specified and directed.
Supply & fixing in repair switch piano flush button type single pole 15 Amps
All as per item 182 here-in-before but 6 pin 5/15 Amps multi type.
M&L for earthing complete with GI steel earth plate electrod 60x60cmx6.00mm thick bouried directly in ground /earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4 mm as earthing lead soldering/revated to earth plate at one end and connected DB by means of nut, bolts etc complete with PCC pit (1:3:6) type GI cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.5 of SSR Part I
SARASWATI CONSTRUCTION CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .