Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.4 LAccepted-AOC KUTUMB 143 40 VINAYAK NAGAR INDALPUR ROAD NAINI PRAYAGRAJ 211008 | PRAYAGRAJ | UTTAR PRADESH | 211008 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹20.4 L+₹82,547.50 (4.22%)Rejected-Finance 20 8 EWS PREETAM NAGAR COLONY ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | 211001 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹20.4 L+₹85,137.50 (4.36%)Rejected-Finance 11 1 7 P D KYDGANJ PRAYAGRAJ U P PIN 211003 | PRAYAGRAJ | UTTAR PRADESH | 211003 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹20.6 L+₹1.0 L (5.36%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹20.9 L+₹1.3 L (6.73%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
16 Jun 2023, 6:00 pmClosed
Garrison Engineer (East) Prayagraj
Stanley Road, Teliyarganj, Prayagraj
REPAIR/MAINT OF MANHOLES, DRAIN, GARBAGE BINS, SEWAGE LINE INCLUDING CLEANING OF SEWAGE LINE AND CERTAIN MISC B/R WORKS AT FORT CANTT PRAYAGRAJ.
2023_MES_596170_1
8648/E8
Open Tender
Civil Works
Item Rate
270 days
Prayagraj
As Per NIT
8 documents required · 8 mandatory
₹500
GE (East) Allahabad
₹60,000
Yes
24 Jun 2023
17 May 2023
19 Jun 2023
17 May 2023
16 Jun 2023
2 Jun 2023
Amount
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or getting out in soft / loose soil complete all as specified and directed
Returning, filling in excavated soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed
Demolition of reinforced cement concrete of any description and in any position including reinforcement cut as required to facilitate demolition, complete all as specified and directed.
M&L for precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs and the like including providing necessary form work etc, set in cement mortar (1:4) complete all as specified and directed Note : Reinforcement to be measured and paid separately
M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillars etc including rubbish off the premises complete all as specified & directed.
M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.
Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 (Except brick) complete all as specified and directed.
Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces on wall, finish surfaces even and smooth without using extra cement complete all as specified and directed
M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces on wall, finished surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of External weather Proof Paint complete all as specified and directed
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
PCC 1:5:10 type E-2 (using 40 mm graded brick aggregate) for filling in sunken floor or mass filling complete all as specified and directed.
S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest including provn of cement concrete bedding, connection to trap, outgoing flushing pipe, anti syphonage pipe, CI trap 100 mm Bore etc complete all as specified and directed.
S&F in repair vitreous china wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover with aluminium hinging device including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc complete all as specified and directed. Note : Plastic seat cover shall be measured separately as Supply only as considered under respective items.
S&F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet float valve including bracket with 32mm dia PVC pipe 600 mm long complete all as specified and directed.
Supply only plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or Aluminised hinging device complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing rubbish off the premises complete all as specified and directed.
M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm each in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles 300mmX200 mm x 5 to 6 mm thick,in vertical surface such as skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for Coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.
M&L for light shade coloured Vitrified Ceramic tiles 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for light shade coloured Vitrified Ceramic tiles 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed.
S&F in repairs 25 mm dia stainless steel curtain rod of 304 grade for door & windows incl one pair of SS bracket and steel end cover for each rod, cut to size and fixed in position complete all as specified and directed
M&L for non skid coloured cermic heavy duty parking tiles n. exc. 0.11Sqm, 10mm thick , set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc.complete all as specified and directed. (each line wire to be measured)
Restraining / Resecuring including making good wire staples of galvenised barbed wire etc complete all as specified and directed.
M&L for Preparation of new steel surfaces of any description n. exc 10 cm in width or girth and applying two coats of aluminium paint over a coat of primer complete all as specified and directed.
M&L for Preparation of old steel surfaces of any description n. exc 10 cm in width or girth and applying one coat of aluminium paint complete all as specified and directed.
PCC1:3:6 type C-1 (using 20 graded stone aggregate) as in surface channels and drains complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement and including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping bed block etc including weathering slightly, rounded or chamfered angles and throating as directed and including necessary form work complete all as specified and directed.
M&L repair for 35mm thick Precast Cement Concrete jallies 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate ) set in CM 1:4 any design or shape as instructed by engineer in charge including RCC pillars 10 Cm X 10 cm for jallies complete all as specified and directed.
M&L for PCC 1:4:8 , type D-2, (using 40mm graded crushed stone aggregat) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for 75 mm thick cement concrete type-D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub baseof floor, finished surfsce even and rough to receive toping layer complete all as specified and directed.
M&L for Chequered cement concrete tiles having hard rubber finish top with polymer admixtures in any pattern or design of min size 30cm x 30 cm x 25 mm thick, set jointed and poited in neat cement slurry in floors over and including 15 mm thick screed bed in CM mortar 1: 4 complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block having hard rubber finish top with polymer admixtures in any pattern or design any shape and size confirmeing to IS-15658-2006 of 80 mm thcik, M-40 grade with grey cement and no pigment over and including 25 mm thick sand cushioning, complete all as specified and directed.
M&L in repair for 18 to 20mm thick granite tiles machine cut in vertical surfaces such as on gate pillars in single piece laid over and including 10mm thick cement screed in cement mortar 1:3, jointed with grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of the granite stone including grinding and polishing complete all as specified and directed.
Cleaning of Chocked sewer line of 100 mm dia any depth through manually or through mechanical appliances and making sewer line functional, complete including working under foul conditions and deposting the sludge rubbish etc off the premises at an isolated places not exceeding 5Km distance complete all as specified and directed. Note :- Manholes connected with effected sewer line shall be measured separately.
Cleaning of Chocked sewer line of 150 mm dia any depth through manually or through mechanical appliances and making sewer line functional, complete including working under foul conditions and deposting the sludge rubbish etc off the premises at an isolated places not exceeding 5Km distance complete all as specified and directed by Engineer in charge.
Cleaning of Chocked sewer line of 200 mm dia any depth through diesel running vehicle mounting hydraulic operated high pressure suction-cum-jetting sewer cleaning machine fitted with pump having suction capacity and water jetting tank including skilled operator, supervisor/engineer and two safaiwala etc including working under foul conditions and deposting the sludge rubbish etc off the premises at an isolated places not exceeding 5Km distance complete all as specified and directed.
Desluding/dewatering/cleaning of existing manhole of any depth by any means ie mechanically or manually by taking out off sludge or solid waste night soil (silt) in isolated places not exceeding SKM distance from the existing manhole of any size complete all as specified and directed. NOTE for item No. 42 to 45 :- (i) Sludge or soil night waste soil (silt) shall be covered by bleaching powder @ 1.5 Kg/Sqm over surface of night soil or sludge and quoted rated are deemed to be included these provisions. No extra claim shall be entertained on this account.
Cleaning of chocked water closet/WC/Floor trap/Gully trap etc manually by taking of sludge waste, night soil and silted soil from the existing pipe, by taking out accumulated garbage, silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), washing and well flushing of the floor trap/WC/gully trap with water complete all as specified and directed. NOTE : Opening and closing of access doors is deemed to be included in the unit rates. The work shall be carried out by deploying two safaiwala in Zone 'A', 'B' area and two safaiwala in Zone 'C' area.
Demolition and breaking up SGSW drain pipes of internal dia 150 mm, set in cement mortar complete all as specified and directed. Note : Excavation and earth work shall be measured & paid separately under respective items.
Demolition and breaking up SGSW drain pipes of internal dia 200 mm, set in cement mortar complete all as specified and directed. Note : Excavation and earth work shall be measured & paid separately under respective items.
M&L for salt glazed stoneware drain pipes 200 mm bore, grade 'A' laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.
M & L for salt glazed stoneware drain pipes 150mm bore, grade 'A' laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.
M&L for providing concrete bed to drain pipes 200 bore including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate complete) complete all as specified and directed.
M&L for providing concrete bed to drain pipes 150 bore including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate complete) complete all as specified and directed.
S&F in repair PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/floor, 110 mm bore complete all as specified and directed
S&F in repair PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/floor, 75 mm bore complete all as specified and directed
S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed
S&F 110 mm dia PVC (SWR) with access door bends any radius complete all as specified and directed
S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and directed
S&F 75 mm dia PVC (SWR) with access door bends any radius complete all as specified and directed
S & F in repair PVC SWR floor trap 75 mm dia with grating incl jointing with solvent cement complete all as specified and direcetd.
S&F 110 mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as specified and directed
S&F in repair 110 mm bore PVC (SWR) vent Cowl complete all as specified and directed
S&F in repair of exterior digital elevation tiles of size 300mm X 450mmx 7 to 8 mm thick on walls etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles complete all as specified and directed.
M&L for ACP panel as in wall panelling or cladding 3mm thick of required colour, fixed on mild steel framing or grid of specified spacing fixed on walls or columns by drilling hole with screw and joints, panels shall be sealed with silicon tape as per manufacturer instructions, fixed in repair, complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) embeded in concrete any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed
Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any weight n exceeding 4kg/sqm complete all as specified and directed
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L for cement concrete Type C2 1:3:6 (40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed
M & L steel work conforming to Fe 410-0 or Fe 310-0 in joist channel angle rolled section ,ms plate,sheet as in door , posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.complete all as specified and directed
Supply only MS galvanised chain link fencing, any size or shape as per sample approved by GE complete all as specified and directed
Fixing only chain link fencing including line wires, any mesh, size and type to any typeof standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed
M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not exc 5 cm long dia of neck 11 to 15 mm complete all as specified and directed.
Dismantling of 6 mm thick AC corrugated sheets in roof covering including ridges, hips, valleys and flashings etc complete all as specified and directed .
M&L for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
M&L for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
M&L in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed
M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L for preparation of old /untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed
Mohit Enterprises
M/S Akhilesh Enterprises
M/S SS Tarders
vs construction
Vibha Enterprises
M/S A P CONSTRUCTION
shweta constructions
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .