SPECIAL REPAIRS FOR REPLACEMENT OF ELECTRICAL COPE POINTS INDUSTRIAL AND DOMESTIC AT PIER 1 AT NSRY KARWAR

Supply, install, testing and commissioning of factory-built, CPRI approved make , outdoor type feeder pillar panel, suitable for 415V, 3 Phase, 4 Wire, 50 Hz AC system, fabricated out of SS304 stainless steel suitable for marine/jetty environment, with IP65/IP66 protection, complete with two horizontal compartments, 800 Amps copper busbar systems, and pedestal mounting. copper bus bar chamber with air insulated PVC sleeved with heat shrink of colour code on copper bus bar of rating of suitable Amps for phases and Amps for neutral fixed on porcelain insulators. the panel shall be both front and back openable type adequate space all around accessories such as LT switchgear and measuring instruments on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size as per standard is practices and comprising of followings accessories including dismantling of existing socket along with all accessories :

Supply, install, testing and commissioning of factory-built, CPRI approved make, outdoor type feeder pillar panel, suitable for 415V, 3 Phase, 4 Wire, 50 Hz AC system, fabricated out of SS304 stainless steel suitable for marine/jetty environment, with IP65/IP66 protection, complete compartments, 800 Amps copper busbar systems, and pedestal mounting. copper bus bar chamber with air insulated PVC sleeved with heat shrink of colour code on copper bus bar of rating of suitable Amps for phases and suitable Amps for neutral fixed on porcelain insulators. the panel shall be both front and back openable type adequate space all around accessories such as LT switchgear and measuring instruments on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size as per standard is practices and comprising of followings accessories including dismantling of existing socket along with all accessories : Compartment : (a) MCCB 630A -01Nos Incoming. (b) multi function meter which shows Amps( 800Amps), Voltage ( 500Volts) with and including CTs-02. (c) Internal wiring of panel with stranded copper cable of suitable size. (d) Neon phase indicating lamp(Set of three) - 01 Nos. (e) Stencilling of panel board including marking of distributions.

Supply, install, testing and commissioning of factory-built, CPRI approved make , outdoor type feeder pillar panel SS316 DC feeder pillar panel complete.” (a) Providing and fixing of factory-built outdoor type DC feeder pillar panel, suitable for 220 Volts DC, 2-pole system, fabricated out of SS316 stainless steel suitable for marine/jetty conditions, with IP65/IP66 protection, dust, weather and vermin proof construction, complete with single compartment and pedestal mounting.

Supply and laying of 2 runs of 2C x 150 sq.mm Copper conductor, XLPE insulated, armoured cable suitable for 220V DC system, including termination with heavy-duty lugs, double compression glands, dressing, clamping and testing, complete including taking down all as specified and directed by Engr-in-charge. Note: 2 runs of 2C x 150 Sqmm copper conductor XLPE cable shall be measured as one length (units).

Supply & lay or fixing or passing through pipe or in cable ducts, 3 core 240sqmm 1100 volts AC grade, XLPE, armoured, electric power cables (heavy duty) with aluminium conductor including dressing, clamping, gland and termination with copper lugs for 630 Amps , 3 pole cope points complete including taking down as specified and directed by Engr-in-charge.

Supply & lay or fixing or passing through pipe or in cable ducts, 4 core 16sqmm 1100 volts AC grade, XLPE, armoured, electric power cables (heavy duty) with aluminium conductor including dressing, clamping, gland and termination with copper lugs for 63 Amps, 4 pole cope points complete including taking down all as specified and directed by Engr-in-charge.

Supply & lay or fixing or passing through pipe or in cable ducts, 4 core 10sqmm 1100 volts AC grade, XLPE, armoured, electric power cables (heavy duty) with aluminium conductor including dressing, clamping, gland and termination with copper lugs for 32 Amps, 4 pole cope points complete including taking down all as specified and directed by Engr-in-charge.

Supply & lay or fixing or passing through pipe or in cable ducts, 2 core 6sqmm 1100 volts AC grade, XLPE, armoured, electric power cables (heavy duty) with aluminium conductor including dressing, clamping, gland and termination with copper lugs for 16 Amps, 2 pole cope points complete including taking down all as specified and directed by Engr-in-charge.

M&L for providing and carrying out insulation resistance testing of all LT cables, busbars and electrical installations using calibrated Megger (1000V), including phase-to-phase, phase-to-earth and polarity tests for DC systems, recording of values and submission of reports, complete as per IS standards complete including taking down all as specified and directed by Engr-in-charge.

Supply and making of heat shrinkable end termination for 3C x 240 sq.mm Aluminium, XLPE insulated, armoured cable (415V AC system) including glands, lugs, ferruling, insulation and termination complete including taking down all as specified and directed by Engr-in-charge.