Combined package of following works on PTK basis 1. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 Note 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works

Karnataka Power Transmission Corporation Limited

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

TECHNO - COMMERCIAL SHEETS

NOTE* For detailed scope of the work please refer Bid Documents.

BIDDERS TO READ CAREFULLY

THE FOLLOWING DOCUMENTS [DULY SIGNED BY AUTHORISED PERSON, WHEREVER NECESSARY] ARE TO BE UPLOADED IN KPPP PORTAL AND BANK GUARANTEE TOWARDS EMD OVER AND ABOVE RS.10.00LAKH AS PER ANNEXURE-II OF THE BID DOCUMENT SHALL BE SENT IN ORIGINAL TO CHIEF ENGINEER ELECTY., Transmission (Operations) Zone, KPTCL, Hassan SO AS TO REACH THIS OFFICE AFTER THE LAST DATE OF SUBMISSION OF BID AND ON OR BEFORE THE DATE & TIME NOTIFIED FOR OPENING OF TECHNO COMMERCIAL BIDS FAILING WHICH THE BID WILL NOT BE OPENED. 1) NO DEVIATION CERTIFICATE (SCHEDULE-16). 2) EMD/BID SECURITY AS DETAILED IN CLAUSE NO. 13 of ITT. 3) BANK GUARANTEE TOWARDS BALANCE EMD/BID SECURITY issued either by a Nationalized/Scheduled Bank. (For the balance EMD above Rs. 10Lakhs ) (SCHEDULE-17) - as detailed in Clause No. 13 of ITT-The Bidder shall scan the Bank Guarantee towards EMD and upload the same in the prescribed format in the slot specified for “EMD and Tender Fee Payments” in the e-procurement portal to enable the owner for verification of EMD BG at the time of opening of Techno Commercial Bid, failing which the offer will be rejected 4) LETTER OF UNDERTAKING (SCHEDULE-18). 5) CONSORTIUM AGREEMENT (IF APPLICABLE-SCHEDULE-19). 6) POWER OF ATTORNEY (SCHEDULE-20). 7) ANY OTHER AGREEMENTS / UNDERTAKINGS /SELF DECLARATIONS SPECIFIED IN THE TENDER.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

BID PROPOSAL SHEET

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

Bidder's Name & Address alongwith GSTIN no. :

Bid Proposal Reference :

Person to be contacted :

E-Mail Address:

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

a) * We have uploaded bid as individual Bidder. (Indicate Name of the Individual Bidder)

b) * We have uploaded bid in Consortium with the following Bidders. (Key in Consortium) VOID

Name of the Consortium Partner Scope / Participation of each Consortium Partner

(* Fill-up whichever is applicable)

1 We, the undersigned Bidder, having read and examined in detail the specifications and all the Bidding documents of the said work and hereby propose to design, manufacture/fabricate, shop test, supply on FOR site basis, and carry out the erection, testing and commissioning including civil, structural and architectural works for

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

2 PRICES AND VALIDITY :

2.1 We declare that the Prices stated in our Proposal are in accordance with subject bid documents including Clause No.40 of "Conditions of Contract (CC)" and Clause No.11 of Instruction to Tenderers (ITT) of Bid Documents. We further declare that all Ex-works price/CIF components of Spares, Maintenance and Testing Equipments and other charges viz., Freight and Insurance, Type Test charges and other charges stated in our proposal shall be as per the Tender conditions. All the Price and other terms and conditions of this Proposal are valid during the Performance of the Contract.

2.2 All Taxes and Duties, such as Custom Duties on imports, Levies, Surcharge/Cess etc., if any, applicable on the transaction are included in the Bid Price and shall be to Our account and the Owner is not having any liability whatsoever on this account, whatever may be the contrary elsewhere in the Bid documents. However the component of Taxes & Duties included in the Bid Price are separately indicated in Schedule - 2 for TDS purpose. We further confirm that our Bid Prices as quoted in Schedule-I, include all import Duties and levies including Licence fees lawfully payable by us on imported items and all other Taxes, Duties and Levies applicable on Bought-out Components, Materials, Equipment and other items and confirm that any such Taxes, Duties and Levies additionally payable shall be to our account. We further confirm that no Sales Tax in any form shall be payable by Owner either for Bought-out items which are despatched by our Sub-Suppliers directly to the Project Site or for items Supplied directly by us.

2.3 We declare that we have noted and considered Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 of Instruction to Tenderers (ITT) of Bid Documents regarding Taxes and Duties and quoted our Prices accordingly. We further agree for TDS as per Statutory stipulations.

2.4 The Bid Prices, the Price components of the various items in the Scope of Supply, Erection including Testing & Commisisoning, Civil and Mandatory spares is quoted in Itemwise Financial Bid in KPPP Portal for this proposal..

3 CONSTRUCTION OF THE CONTRACT : We, declare that we are making the Offer on the basis of Single Contract for the entire Scope of the Package in accordance with Clause No.26 of Instruction to Tenderers (ITT) of Bid Document.

4 We having studied Clause No.39 of Conditions of Contract (CC ), Clause No. 11.11 Instruction to Tenderers (ITT) of Bid Documents , relating to Tax and we hereby, declare that if any income-tax, surcharge on income tax or any other corporate tax is attracted under the law, we agree to pay the same.

5 Bid Security/ EMD : We have enclosed a Bid Security through e-Payment mode for a sum of Rs.10.00Lakhs and remaining amount of Rs.................................................. ( above Rs.10 Lakhs) in the form of Bank Guarantee in original and two copies of the original valid for a period of 225 days from the date of opening of bids, and liable to be forfeited in accordance with Bid Documents. (Mode of Payment towards EMD is as detailed in NIT/CLAUSE NO. 13 of ITT.)

We have also ensured that the above Bid Guarantee furnished by us is in line with the Bid Documents and complete in respect of following :

1. Value of Non judicial Stamp Paper purchased in the name of executing Bank is as per Stamp Act.

2. Power of Attorney Number and Date as well as Signature and Full Name and Designation of Executant along with Bank's Stamp are there.

3. Signature, Full Name, Designation and address of Witness are there.

4. Completed Mailing address of the Head Office of the Bank is indicated.

6.1 We declare that the Works shall be performed strictly in accordance with the Specifications and Documents except for the variations and Deviations, all of which have been detailed out exhaustively in the following Schedules, irrespective of whatever has been stated to the contrary anywhere else in our Proposal.

a Commercial Deviations Schedule Schedule - 5

b Technical Deviations Schedule Schedule - 6

6.2 We further confirm that Specified Stipulation of following Clauses are acceptable to us and No Deviation / Exceptions are taken on any account whatsoever in the following Clauses.

a. Terms of payment Clause No. 37 of Conditions of Contract (CC) & Clause No.8 of Special Conditions of Contract-SCC.

b. EMD/Bid Security Clause No.6, Section :1, Invitation for Tenders (IFT) and Clause No.13, Section :2, Instruction to Tenderers (ITT)

c. Contract Performance Guarantee Clause No.29, Instruction to Tenderers (ITT)

d. Penalty for delay Clause No.41 of Section-5 : Conditions of Contract (CC)

e. Price Basis/ Price adjustment Clause No. 40 of Section-5 :Conditions of Contract (CC)

f. Defects Liability Period/Guarantee Clause No.10 of Special Conditions of Contract (SCC) and Section 6 : Contract data

g. Work Schedule Clause No.17 of Conditions of Contract-CC

h. Taxes and Duties Clause No.11.11 of Instruction to Tenderer (ITT)

Further, we agree that additional conditions, if any, found in the Proposal Documents other than those stated in Deviation Schedules, save that pertaining to any rebates offered, shall not be given effect to.

7 PERFORMANCE GUARANTEE ; We declare that the ratings and performance figures of the equipment to be supplied and erected by us are guaranteed. The Guaranteed particulas of different equiment in our Scope are enclosed in Data Requirement Sheets.

8 BID PRICING : We further, declare that the Prices stated in our Proposal are in accordance with your ITT & SCC and all other relevant clauses of Bid Documents.

9 PRICE ADJUSTMENT : We declare that the Prices quoted by us are in accordance Clause No. 40 of Section-5 :Conditions of Contract (CC)

10 SPECIAL TOOLS AND TACKLES : We have given a list of Special Tools and Tackles in Schedule - 7 and Prices thereof are included in our lumpsum Bid Price. We further agree that any items of Special Tools and Tackles, though not included in the aforesaid list, but required for effective Erection, Testing, Commissioning & Operation of the Equipments of Substations shall also be furnished by us, at no extra cost to you.

11 ADDITIONAL INFORMATION : In addition to the information called for in these Proposal Sheets, we have included with this Proposal, additional information as listed in Schedule - 8. We further confirm that such additional information does not imply any additional deviation beyond those covered in Schedule - 5 & 6 and in case of any contraction between these additional information and other provisions of Bid, the later will prevail.

12 QUALIFICATION DATA : We confirm having submitted the Qualification Data, as required by you in your Bid Documents in e-Procurement Portal along with this Proposal. Further we have filled in the information for Qualification Requirements in Schedule 9. In case you require any further information in this regard, We agree to furnish the same in time.

13 WORK SCHEDULE : If this Proposal is accepted by you, we agree to submit Engineering Data, Provide Services and complete the entire Work from time to time, in accordance with Schedules indicated in the Proposal. We fully understand that the Time Schedule stipulated in this Proposal is the essence of the Contract, if awarded. The completion schedule of the various Major Key Phases of the Work is indicated in Schedule - 11.

14 CONTRACT PERFORMANCE GUARANTEE ; We further agree that if our Proposal is accepted, we shall provide an irrecoverable Contract Performance Guarantee, of value equivalent to Five Percent (5%) of the Contract Price plus additional security for unbalanced tenders in accordance with Clause 25.5 & 29 of Instructions To Tenderers (ITT) and Clause No. 43 of the Conditions of Contract (CC) of the tender valid up to the end of ninety (90) days after the end of the Contract Warranty Period in the form of .........................................................................................................................................................................................................................................................(Please specify the form of Guarantee) in your favour and enter into a formal agreement with you within Twenty (20) days from the date of issue of Letter of Intent to award the Contract .

16 CHECK LIST : We have included a Checklist duly filled in Schedule 21

17 We, hereby, declare that only the Persons or Firms interested in this Proposal are named herein as Principals and that no other Persons are interested in the Proposal or in the Contract to be entered into, if we are awarded the Contract, and that this proposal is made without any connection with any other Person, Firm or Party likewise submitting a Proposal and that this Proposal is in all respect for and in good faith, without collusion or fraud.

18 We declare, in case our bid is accepted, that until a formal Contract is prepared & executed, this bid together with your written Letter of Intent to Award the Contract thereof and your notification of award /Letter of Intent to Award the Contract shall constitute a binding contract between us. We further understand that you are not bound to accept the lowest or any bid you may receive.

Thanking you, we remain,

Yours faithfully,

Place Printed Name

Business Address Country of Incorporation (State or Province to be indicated)

Name and Address Principal Officer

Karnataka Power Transmission Corporation Limited

SHEET FOR TECHNO COMMERCIAL OPENING (Unpriced)

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

We declare that in terms of Clause no. 11 of ITT & all other relevant clause of Bid documents, the following are our lumpsum price in Rupees for the entire scope of work as specified in the Specifications and Documents.( Inclusive of all Taxes & Duties).

Total Lumpsum Price : ( In Figures) Note: Fill as "YES" against this column in case Prices are indicated in the Item-Wise Bid Financial Offer in figures

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE- 2 B - STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

SHEET FOR TECHNOCOMMERCIAL OPENING

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

Details of payments made in the form of Credit card/Debit card/NEFT/RTGS/OTC (over the counter) as per the tender conditions should be keyed in against column no. 3 (a) . BG Amount, BG No. and date, Name and address of the bank issuing the BG, validity of the BG should be keyed in against column no. 3 (b) .

FILL ONLY IN LIGHT BLUE COLOURED CELLS.

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

STATEMENT OF COMMERCIAL TERMS AND CONDITIONS

Sl. No. Particulars Details

1 Bid proposal form uploaded

2 No deviation certificate uploaded

3. a) EMD / Bid Security Bids shall be accompanied by bid security (EMD); 1) Up to Rs.10Lakh The following modes of payment will be provided as a part of e-Payment services. • Credit Card/Debit Card • Net Banking • NEFT/RTGS • Over-the-Counter (OTC) • IMPS For further detail regarding mode of e-payment of EMD in e-procurement platform, contact e-procurement cell, Government of Karnataka.

b) EMD amount above Rs.10Lakh by Bank Guarantee

4 Validity of the Bid.

5 Qualifying Requirements.

6 Financial capability

8 Taxes & Duties.

9 Completion Schedule

10 Defects Liability Period/Guarantee

11 Payment Terms

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(i) - Supply portion- Mc Gann

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Work A: "Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District on PTK basis-Work Code-CD1120”

Sl. No. Item Description Unit Qty Unit rate in Rs. Total Amount in Rs.

A1 CIRCUIT BREAKER

1 CIRCUIT BREAKER :SF6 circuit breaker with semi-pneumatic/pneumatic operated/ with spring type operating mechanism including mounting structure with rigid bi-metallic terminal connector suitable for Moose ASCR and mounting structure. 145kV , 3150A,40kA SF6 CB For 110 kV Transformer Nos. 1 812700.00 812700.00

A2 Nitrogen injection fire extinguishing system- Supplying, erection, Commissioning & including Civil Engineering works. Soak pit etc., as per the recommendations of the supplier of the fire fighting system for power transformer beolw 100 MVA No 1 1198716.75 1198716.75

A2 ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with Solid core cylindrical post Insulators.

I 110kV Isolators

a) 110 kV, 1250 A, 40 kA class double break manually operated isolators with terminal connector suitable for Moose ACSR Upright mounting type without Earth switch. (LPH 6350mm) Terminal connectors for Isolators shall be as follows: Rigid type suitable for Moose ACSR-3 Nos Flexible type suitable for 50mm Al.pipe-3Nos Set 1 345576.00 345576.00

II 11kV Isolators

a) 11kV Isolator, double break 400A,25kA capacity with rigid bimetallic terminal connector suitable for coyote ACSR for Capacitor Bank. set 1 22323.00 22323.00

A3 CURRENT TRANSFORMER: Current transformers including marshalling boxes ,Single phase, Oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor

1 110 KV Class. 40 KA, CT of Ratio 200-100/1-1-1A for Transformer Core1=Vk-400V, Rct 2ohm at @200/1A,Accuracy class PS-Dist/Dif Core2= 10VA, Accuracy class 0.2s-Metering Core3= 30VA , 5P20- Backup, No.s 3 157500.00 472500.00

2 11KV Class,25kA NCT of ratio 1200-800/1-1-1 A for REFR Protection ( similar rating & ratio as that of incomer of 11KV Switchgear ) with terminal connector suitable for 2 nos of copper plates as per technical specifications Note: 1)All the CTs in each kV class shall be of one and the same make for interchangeability & reliability of per:formance. 2)The make and characteristics of llkV NCT should be the same as that of the incomer CT of 1lkV Switchgear. To ensure this, the 11kV procured from the supplier of 11kV switchgear only. Nos 1 66150.00 66150.00

A4 Surge arrestors

SURGE ARRESTORS: (Porcelain housing) Metal Oxide Gapless type with rigid

1 96 kV, 1O KA, SM type-For Transformer No.s 3 45738.00 137214.00

A5 Control and Relay panel complete

1 For Power Transformer 110/11KV Note: 1. All the C&R panels and the associated panels shall be of one and the same make for uniformity and interchangability of components. 2. The DLMS protocol energy meter/ electronic tri- vector meter with ABT features has to be provide on both HV side & LV side of C&R panel. No.s 1 663201.00 663201.00

A6 MOUNTING STRUCTURES

1 110 KV Isolators. Live Point Height -6350mm (0.982 MT per Structure). No/MT 01/0.982 126,383.31 126383.31

2 110KV Current transformer (0.158 MT per Structure). No/MT 03/0.474 20,501.63 61504.88

3 11KV NCTs. (0.157 MT per Structure). No/MT 01/0.157 20,351.71 20351.71

4 96 kV Lightening arrestors. (0.116 MT per Structure). No/MT 03/0.348 15,099.61 45298.83

6 110 KV High pedestal insulators for transformer. (0.15 MT per Structure). No/MT 03/0.450 19,564.10 58692.31

7 11KV UG cable terminating structure for LV side of transformer-(0.072 MT per Structure). No/MT 01/0.072 9,288.66 9288.66

8 11KV GOS/Cable terminating structure for 11 KV Capacitor Bank- (0.158 MT per Structure). No/MT 01/0.158 20,501.63 20501.63

A7 BUS BAR FORMATION: Rigid bus with taps & clamps: 110KV side

1 50mm size connecting isolator to vertical tap Mtrs. 72 1,289.40 92836.80

1 Post Insulator Solid Core insulator 110KV Class, 1 Unit/Stack No 3 12721.80 38165.40

1 Post insulator clamp suitable for 50MM Al tube and 110KV Solid Core Insulator. No.s 3 1710.45 5131.35

A10 COPPER CONTROL CABLE:- 1.1 kV Grade PVC Insulated armoured Copper Control Cable of sizes with lugs/ferrules/Gland as per technical specifications.

A11 11KV U.G. Cable with the required cable terminations at both ends.

1 11kV class 1 X 1000 Sq mm U.G. Cable XLPE (from 110/ 11kV transformers to 11kV switchgear) Mtrs. 300 1599.15 479745.00

2 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Indoor type) Nos. 4 3998.40 15993.60

3 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (outdoor type) Nos. 4 4263.00 17052.00

A12 CAPACITOR BANK

1 Design, Engineering, supply, erection, testing & commissioning of 2.9 MVAR, 12. l kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable neutral CT and station class LAs, 0.2% series reactor on neutral side with mounting structures for NCT, Capacitor Bank, station class LAs, Series reactor etc,. complete as per specification set 1 565372.50 565372.50

A13 Equipements for SCADA Communication as per actual material requirement given AEE/SCADA

1 Multi Functional Transducer (MFT) 0.2S Class including labour (market rate) No.s 4 5118.75 20475.00

2 Opto Coupler (110V DC,8i/p) including labour (market rate) No.s 4 1377.60 5510.40

Cables- Supplying & Laying

3 Current cables - Copper core with C/S 4 Sqmm Multistrand 4core Mtrs. 40 185.85 7434.00

4 Voltage cables - Copper core with C/S 2.5Sqmm Multistrand 4core Mtrs. 20 187.95 3759.00

5 Signal Cables-Armoured copper core with C/S 0.5sqmm multistrand 10 Core Mtrs. 40 150.15 6006.00

6 Control Cables-copper core with C/S 1.5sqmm multistrand 10 core Mtrs. 20 162.75 3255.00

0 RYB & Black colour 2.5sqmm for CT/PT wiring. (Red=48 mtr Yellow=48 mtrs Blue=48 mtrs Black=24 mtrs Total =168 mtr ) Mtrs. 168 0.00

6 Link TBs for PT wiring & DO Wiring Nos. 52 0.00

7 CT TBs Nos. 36 0.00

8 Din Rails, C&G Type TB Channels, Suitable ring, Tubular & Fork lugs, glands Tapes Etc L/S 1 0.00

9 Digital Input Card No.s 0.00

10 Digital Output Card No.s 0.00

11 Heavy Duty Relays(HDR) No.s 0.00

12 Digital input card along with patch cable and necessary TB's (suitable for ABB RTU560 Panel 23BE23)(1No DI Card+ 1 set Amp cable along with interfacing TB's) Nos 3 0.00

13 Digital output card along with patch cable and necessary TB's (suitable for ABB RTU560 Panel 23BA20)(1No DO Card+ 1 set Amp cable +16Nos CMR relays along with interfacing TB's and wires from relays to TB's)) Nos 2 0.00

14 Wiring, installation,testing and commissioning for additional trf within 1IC+2F+1CB+1BC. No.s 1 0.00

15 Integration to be done in RTU panel for additional trf within 1IC+2F+1CB+1BC No.s 1 0.00

9 Digital Input Card No.s 0.00

10 Digital Output Card No.s 0.00

11 Heavy Duty Relays(HDR) No.s 0.00

A14 MISCELLANEOUS ITEMS

1 Rubber mats 1000 mm x 1000 mm x 10 mm size suitable for 15 kV class. Nos 4 1995.00 7980.00

2 Eqnipments name plates & earthing riame plates including diing at outdoor yard. Nos 20 436.80 8736.00

Sub Total 6205994.13

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(ii) - ERECTION & T & C- Mc Gann

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Work A: "Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District on PTK basis-Work Code-CD1120”

ERECTION & DECOMMISSIONING PORTION

Sl. No. Item Description Unit Qty Erection charges in Rs. Total Amount in Rs. T&C Charges in Rs. Total Amount in Rs.

B1 POWER TRANSFORMER :

Power Transformer: Power Transformer 10 MVA, 110/33-11 kV Delta/Star,Dyn11,3 Ph, 50 Hz, Core type winding with OLTC,RTCC Panel.etc., complete first filling of Transil Oil with 10% spare oil with Terminal connectors suitable for Drake ACSR on 110 KV Side and AAAC moose/ 2 Nos of copper flat for each ohase from LV side of Transformer to Cable at 11kV cable terminating structure with suitable support insulator on LV side of Transformer and 2 Nos of Copper flats from neutral terminal to earthmat through NCT along with neccessary support pin insulators.(35MT) Nos. 1 188,674.50 188674.50 50596.35 50596.35

B2 CIRCUIT BREAKER

CIRCUIT BREAKER :SF6 circuit breaker with semi-pneumatic/pneumatic operated/ with spring type operating mechanism including mounting structure with rigid bi-metallic terminal connector suitable for Moose ACSR and mounting structure.

1 145kV , 3150A,40kA SF6 CB For 110 kV Transformer Nos. 1 11355.75 11355.75 44415.00 44415.00

ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with Solid core cylindrical post Insulators.

I 110 kV, 1250 A, 40 kA class double break manually operated isolators with terminal connector suitable for Moose ACSR

a) Upright mounting type without Earth switch. (LPH 6350mm) Terminal connectors for Isolators shall be as follows: Rigid type suitable for Moose ACSR-3 Nos Flexible type suitable for 50mm Al.pipe-3Nos Set 1 9136.05 9136.05 1366.05 1366.05

II 11kV Isolators

1 11kV Isolator, double break 400A,25kA capacity with rigid bimetallic terminal connector suitable for coyote ACSR for Capacitor Bank. set 1 1,274.70 1274.70

B4 CURRENT TRANSFORMER

CURRENT TRANSFORMER: Current transformers including marshalling boxes ,Single phase, Oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor

1 110 KV Class. 40 KA, CT of Ratio 200-100/1-1-1A for Transformer Core1=Vk-400V, Rct 2ohm at @200/1A,Accuracy class PS-Dist/Dif Core2= 10VA, Accuracy class 0.2s-Metering Core3= 30VA , 5P20- Backup, No.s 3 2237.90 6713.70 4935.35 14806.04

2 11KV Class,25kA NCT of ratio 1200-800/1-1-1 A for REFR Protection ( similar rating & ratio as that of incomer of 11KV Switchgear ) with terminal connector suitable for 2 nos of copper plates as per technical specifications Note: 1)All the CTs in each kV class shall be of one and the same make for interchangeability & reliability of per:formance. 2)The make and characteristics of llkV NCT should be the same as that of the incomer CT of 1lkV Switchgear. To ensure this, the 11kV procured from the supplier of 11kV switchgear only. Nos 1 769.65 769.65 4772.25 4772.25

B5 Surge arrestors

SURGE ARRESTORS: (Porcelain housing) Metal Oxide Gapless type with rigid

1 96 kV, 1O KA, SM type-For Transformer No.s 3 466.20 1398.60

B6 Control and Relay panel complete

1 For Power Transformer 110/11KV Note: 1. All the C&R panels and the associated panels shall be of one and the same make for uniformity and interchangability of components. 2. The DLMS protocol energy meter/ electronic tri- vector meter with ABT features has to be provide on both HV side & LV side of C&R panel. No.s 1 6256.95 6256.95 45121.65 45121.65

B7 MOUNTING STRUCTURES

1 110 KV Isolators. Live Point Height -6350mm (0.982 MT per Structure). No/MT 01/0.982 6009.15 5900.99

2 110KV Current transformer (0.158 MT per Structure). No/MT 03/0.474 6009.15 2848.34

3 11KV NCTs. (0.157 MT per Structure). No/MT 01/0.157 6009.15 943.44

4 96 kV Lightening arrestors. (0.116 MT per Structure). No/MT 03/0.348 6009.15 2091.18

5 110 KV High pedestal insulators for transformer. (0.15 MT per Structure). No/MT 03/0.450 6009.15 2704.12

6 11KV UG cable terminating structure for LV side of transformer-(0.072 MT per Structure). No/MT 01/0.072 6009.15 432.66

7 11KV GOS/Cable terminating structure for 11 KV Capacitor Bank- (0.158 MT per Structure). No/MT 01/0.158 6009.15 949.45

B8 BUS BAR FORMATION:

Rigid bus with taps & clamps: 110KV side

1 50mm size connecting isolator to vertical tap Mtrs. 72 100.80 7257.60

1 Post Insulator Solid Core insulator 110KV Class, 1 Unit/Stack No 3 466.20 1398.60

B10 COPPER CONTROL CABLE:-

1.1 kV Grade PVC Insulated armoured Copper Control Cable of sizes with lugs/ferrules/Gland as per technical specifications.

B11 11kV Switch Gear

11 kV, 25kA,Metal clad VCB switcñgear (1600A for incomer & 1250 A for feeders) outdoor type, each comprising of 1I/C+4F+1CB+1BC+ 1AP (remote annunciation cum control panel) with CTs & PTs etc., completer as per technical specification. Note: 1.Simplex type Annunciator panel shall be provided for switchgear (consisting of incomer, feeders and bus coupler). 2.for Capacitor Bank: 'The Capacitor Bank panel shall be same as that of the 11 kV bank i.e. incomer panel in all respect.In addition to relays provided in the I/C, the following addition relays to be provided. i) Circulating current relay with timer. ii Under voltage relay. iii) Timer relay. Per panel 8 2185.05 17480.40 8441.2965 67530.37

B12 11KV U.G. Cable with the required cable terminations at both ends.

1 11kV class 1 X 1000 Sq mm U.G. Cable XLPE (from 110/ 11kV transformers to 11kV switchgear) Mtrs. 300 30.45 9135.00

2 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Indoor type) Nos. 4 3939.6 15758.40

3 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (outdoor type) Nos. 4 3939.6 15758.40

B13 Equipements for SCADA Communication as per actual material requirement given AEE/SCADA

1 Multi Functional Transducer (MFT) 0.2S Class including labour (market rate) No.s 4 1632.75 6531.00

2 Opto Coupler (110V DC,8i/p) including labour (market rate) No.s 4 1632.75 6531.00

B14 Cables- Supplying & Laying

1 Current cables - Copper core with C/S 4 Sqmm Multistrand 4core Mtrs. 40 26.25 1050.00

2 Voltage cables - Copper core with C/S 2.5Sqmm Multistrand 4core Mtrs. 20 26.25 525.00

3 Signal Cables-Armoured copper core with C/S 0.5sqmm multistrand 10 Core Mtrs. 40 26.25 1050.00

4 Control Cables-copper core with C/S 1.5sqmm multistrand 10 core Mtrs. 20 26.25 525.00

B15 Earth Mat formation

1 Grounding of equipments with 50 x 6 mm G.I flat and connecting equipments to the earth mat/ ground pit including all connected works with all materials supplied by the contractor. Rmtr. 507 351.75 178337.25

2 Providing C.I. Pipe ot l00 mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 5ox6mm clamp welded allround the pipe etc., including cost of excavation ( all materials supplied by contractor) Nos 17 17097.15 290651.55

3 Supplying and fixing 450mm dia x 450mm to height 1.5" to 2" Hume pipe collars for earch pits. Nos 17 1573.95 26757.15

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3A(iii) - Civil portion- Mc Gann

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Work A: "Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District on PTK basis-Work Code-CD1120”

Sl. No. Item Description Unit Qty Unit Rate in Rs. Total Amount in Rs.

C1 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. In all kinds of soils Depth upto 1.5 m Cum. 140.00 254.10 35574.00

C2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6Using 20 mm nominal size graded crushed coarse aggregates Cum. 15.50 6454.35 100042.43

C3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation add at 3% Cum. 38.50 6734.50 259278.27

C4 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation add at 35% Cum. 4.35 8826.77 38396.46

C5 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Cum. 5.9 6474.30 38198.37

C6 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures Kgs. 1575.00 84.01 132316.54

C7 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum. 35.50 279.30 9915.15

C8 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs. 3428.00 113.40 388735.20

C9 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum. 17.50 6682.20 116938.50

C10 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqmtr. 32.00 368.55 11793.60

C11 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqmtr. 16.00 267.75 4284.00

C12 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqmtr. 123.00 596.40 73357.20

C13 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm) Rmtr 7.00 473.55 3314.85

C14 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point up to 3Mtr from tapping point to out let via switch box Point 4.00 299.25 1197.00

C15 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box Point 2.00 413.7 827.40

C16 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4' - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition Nos 5.00 1332.45 6662.25

C17 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders Each 5.00 128.1 640.50

C18 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick Rmtr. 30.00 81.9 2457.00

C19 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 2.5 sqmm Rmtr. 30.00 44.1 1323.00

C20 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 4 sqmm Rmtr. 30.00 66.15 1984.50

C21 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket Each 2.00 247.8 495.60

C22 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Switch 6A One Way Switch Each 6.00 107.1 642.60

C23 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plate swith due groove cutting in Brick/C.Cwall, including necessary rawl plugs, Machine/NF screws etc., complete. 8 Way Each 2.00 229.95 459.90

C24 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing metal/PVC box. 8 Module Each 2.00 298.2 596.40

C25 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. Each 2.00 5726.7 11453.40

C26 Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all expose faces, curing for 10 days with all lead and lift with appurtenances. complete. medium Duty (600 X 600 mm) Set 2.00 2009.7 4019.40

C27 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 300 mm dia. for Cable duct E & F Type Each 30.00 1398.6 41958.00

C28 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. Cum. 114 275.1 31361.40

C29 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 Rmtr 30 431.55 12946.50

C30 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the Excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 63mm dia., 6 kg/sqcm & class 3 Rmtr 30 169.05 5071.50

C31 Removing and Re-spreading Existing Jelly in Station Yard : Removing the existing Jelly in the Station Yard, stocking and Respreading after completetion of Equipement foundations etc.,.( Area 23.00 X 11.50= 264.50 Smtr. + 11.00 X 7.50 = 82.50 Smtr. + 20.00 X 3.00 = 60.00 Smtrs.) Total = 407.00 sqmtr. Sqmtr. 407 55.65 22649.55

Sub Total 1358890.46

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3B(i) - Supply portion- Gajanur

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Work B: Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District on PTK Basis-Work Code-CD1121 ”

Sl. No. Item Description Unit Qty Unit rate in Rs. Total Amount in Rs.

A1 CIRCUIT BREAKER

CIRCUIT BREAKER :SF6 circuit breaker with semi-pneumatic/pneumatic operated/ with spring type operating mechanism including mounting structure with rigid bi-metallic terminal connector suitable for Moose ASCR and mounting structure.

145kV , 3150A,40kA SF6 CB

1 for 110 kV Transformer Nos. 1 774000.00 774000.00

A2 Nitrogen injection fire extinguishing system- Supplying, erection, commissioining & including Civil Engineering works. Soak pit etc., as per the recommendations of the supplier of the fire fighting system for power transformer beolw 100 MVA set 1 1141635 1141635

ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with Solid core cylindrical post Insulators.

I 110 kV, 1250 A, 40 kA class double break manually operated isolators with terminal connector suitable for Drake ACSR

a) upright mounting type without Earth Switch (Live Point Height 4600mm) Terminal connectors for Isolators shall be as follows: Rigid type suitable for Drake ACSR-3 Nos Flexible type suitable for 63mm Al.pipe-3Nos Set 1 321860.00 321860.00

II 11kV Isolators

1 11kV Isolator, single break 400A,25kA capacity with roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR set 2 14956.00 29912.00

2 11kV Isolator, double break 400A,25kA capacity with rigid bimetallic terminal connector suitable for coyote ACSR for Capacitor Bank. set 1 21260.00 21260.00

A4 CURRENT TRANSFORMER

CURRENT TRANSFORMER: Current transformers including marshalling boxes ,Single phase, Oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor

1 110 KV Class. 40 KA, CT of Ratio 200-100/1-1-1A for Transformer Core1=Vk-400V, Rct 2ohm at @200/1A,Accuracy class PS-Dist/Dif Core2= 10VA, Accuracy class 0.2s-Metering Core3= 30VA , 5P20- Backup, No.s 3 150000.00 450000.00

2 11KV Class,25kA NCT of ratio 1200-600/1-1-1 A for REFR Protection ( similar rating & ratio as that of incomer of 11KV Switchgear ) with terminal connector suitable for 2 nos of copper plates as per technical specifications Note: 1)All the CTs in each kV class shall be of one and the same make for interchangeability & reliability of per:formance. 2)The make and characteristics of llkV NCT should be the same as that of the incomer CT of 1lkV Switchgear. To ensure this, the 11kV procured from the supplier of 11kV svñtchgear only. Nos 1 63000.00 63000.00

A5 SURGE ARRESTORS: (Porcelain housing) Metal Oxide Gapless type with rigid

1 96 kV, 1O KA, SM type-For Transformer No.s 3 43560.00 130680.00

A6 Control and Relay panel complete

1 For Power Transformer 110/11KV Note: 1. All the C&R panels and the associated panels shall be of one and the same make for uniformity and interchangability of components. 2. The DLMS protocol energy meter/ electronic tri- vector meter with ABT features has to be provide on both HV side & LV side of C&R panel. No.s 1 631620.00 631620.00

A7 Station Structures: (Including bolt and nuts)

1 Supplying & erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.} complete set . ( 2 Nos for Feeders ) Set 2 26922.00 53844.00

A8 MOUNTING STRUCTURES

1 110 KV Isolators. Live Point Height -4600mm (0.752 MT per Structure). No/MT 01/0.752 92055.70 92055.70

2 110KV Current transformer (0.158 MT per Structure). No/MT 03/0.474 19525.36 58576.08

3 11KV NCTs. (0.157 MT per Structure). No/MT 01/0.157 19382.58 19382.58

4 96 kV Lightening arrestors. (0.116 MT per Structure). No/MT 03/0.348 14380.58 43141.74

5 110 KV Pedestal insulators for Bus (0.14 MT per Structure). No/MT 01/0.140 17350.14 17350.14

6 110 KV High pedestal insulators for transformer. (0.15 MT per Structure). No/MT 03/0.450 18632.48 55897.44

7 11KV UG cable terminating structure for LV side of transformer-(0.072 MT per Structure). No/MT 01/0.072 8846.34 8846.34

8 11KV GOS/UG cable terminating structure for 11 KV Capacitor Bank- (0.158 MT per Structure). No/MT 01/0.158 19,525.36 19525.36

A9 BUS BAR FORMATION:

1 Drake ACSR Mtrs. 150 461.00 69150.00

2 Coyote ACSR Mtrs. 30 164.00 4920.00

A10 Insulators:

1 Post Insulator Solid Core insulator 110KV Class, 1 Unit/Stack No 4 12116.00 48464.00

1 C-Type wedge connector suitable for DRAKE-DRAKE (110KV Bus) No.s 3 2718.00 8154.00

2 Post Insulator clamp suitable for single Drake ACSR & 110KV Solid core insulator No.s 4 1087.00 4348.00

A12 COPPER CONTROL CABLE:-

1.1 kV Grade PVC Insulated armoured Copper Control Cable of sizes with lugs/ferrules/Gland as per technical specifications.

A13 11KV U.G. Cable with the required cable terminations at both ends.

1 11kV class 1 X 1000 Sq mm U.G. Cable XLPE (from 110/ 11kV transformers to 11kV switchgear) Mtrs. 200 1523.00 304600.00

2 11kV class 3 X 240 Sq mm U.G. Cable XLPE (from 11kV switchgear to 11kV take off DP structure) Mtrs. 200 1656.048 331209.60

3 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Indoor type) Nos. 4 3808 15232.00

4 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (outdoor type) Nos. 4 4060 16240.00

5 Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Indoor type) Nos. 3 4691 14073.00

6 Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (outdoor type) Nos. 3 5318 15954.00

A14 CAPACITOR BANK

1 Design, Engineering, supply, erection, testing & commissioning of 2.9 MVAR, 12. l kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable neutral CT and station class LAs, 0.2% series reactor on neutral side with mounting structures for NCT, Capacitor Bank, station class LAs, Series reactor etc,. complete as per specification set 1 538450 538450.00

A15 Equipements for SCADA Communication as per actual material requirement given AEE/SCADA

1 Multi Functional Transducer (MFT) 3 Phase-4wire self powered 0.2S Class including labour (market rate) No.s 6 4875 29250.00

2 Signal/communication Cables-Armoured copper core with 10 Core 0.5sqmm cross section multistrand (For MFT Integration & DI Wiring ) Mtrs. 250 143 35750.00

3 Control Cables-copper core with 10 core 1.5sqmm cross section multistrand armoured for DO wiring Mtrs. 120 155 18600.00

4 RYB & Black colour 2.5sqmm for CT/PT wiring. (Red=48 mtr Yellow=48 mtrs Blue=48 mtrs Black=24 mtrs Total =168 mtr ) Mtrs. 168 159 26712.00

5 Opto Coupler (110V DC,8i/p) including labour (market rate) No.s 4 1312 5248.00

6 Link TBs for PT wiring & DO Wiring Nos. 52 42 2184.00

8 Din Rails, C&G Type TB Channels, Suitable ring, Tubular & Fork lugs, glands Tapes Etc L/S 1 1500 1500.00

9 Digital input card along with patch cable and necessary TB's (suitable for ABB RTU560 Panel 23BE23)(1No DI Card+ 1 set Amp cable along with interfacing TB's) Nos 3 50000 150000.00

10 Digital output card along with patch cable and necessary TB's (suitable for ABB RTU560 Panel 23BA20)(1No DO Card+ 1 set Amp cable +16Nos CMR relays along with interfacing TB's and wires from relays to TB's)) Nos 2 65000 130000.00

A16 MISCELLANEOUS ITEMS

1 Rubber mats 1000 mm x 1000 mm x 10 mm size suitable for 15 kV class. Nos 4 1900 7600.00

2 Eqnipments name plates & earthing riame plates including dieing at outdoor yard. Nos 20 416 8320.00

Sub total 6272058.98

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3B(ii) - ERECTION & DECOMMISSIONING- Gajanur

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Work B: Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District on PTK Basis-Work Code-CD1121 ”

ERECTION & T & C PORTION

Sl. No. Item Description Unit Qty Erection charges in Rs. Total Amount in Rs. T&C Charges in Rs. Total Amount in Rs.

B1 POWER TRANSFORMER :

Power Transformer: Power Transformer 10 MVA, 110/33-11 kV Delta/Star,Dyn11,3 Ph, 50 Hz, Core type winding with OLTC,RTCC Panel.etc., complete first filling of Transil Oil with 10% spare oil with Terminal connectors suitable for Drake ACSR on 110 KV Side and Drake ACSR/ 2 Nos of copper flat for each ohase from LV side of Transformer to Cable at 11kV cable terminating structure with suitable support insulator on LV side of Transformer and 2 Nos of Copper flats from neutral terminal to earthmat through NCT along with neccessary support pin insulators.(35MT) Nos. 1 179690.00 179690.00 48187.00 48187.00

B2 CIRCUIT BREAKER

CIRCUIT BREAKER :SF6 circuit breaker with semi-pneumatic/pneumatic operated/ with spring type operating mechanism including mounting structure with rigid bi-metallic terminal connector suitable for Drake ACSR and mounting structure.

1 145kV , 3150A,40kA SF6 CB for 110 kV Transformer Nos. 1 10815.00 10815.00 42300 42300.00

ISOLATORS : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with Solid core cylindrical post Insulators.

I 110kV Isolators: 110 kV, 1250 A, 40 kA class double break manually operated isolators with terminal connector suitable for Drake ACSR

a) upright mounting type without Earth Switch (Live Point Height 4600mm) Terminal connectors for Isolators shall be as follows: Rigid type suitable for Drake ACSR-3 Nos Flexible type suitable for 63mm Al.pipe-3Nos Set 1 8701.00 8701.00 1301.00 1301.00

II 11kV Isolators

1 11kV Isolator, single break 400A,25kA capacity with roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR set 2 1214.00 2428.00

2 11kV Isolator, double break 400A,25kA capacity with rigid bimetallic terminal connector suitable for coyote ACSR for Capacitor Bank. set 1 1214.00 1214.00

B4 CURRENT TRANSFORMER

CURRENT TRANSFORMER: Current transformers including marshalling boxes ,Single phase, Oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor

1 110 KV Class. 40 KA, CT of Ratio 200-100/1-1-1A for Transformer Core1=Vk-400V, Rct 2ohm at @200/1A,Accuracy class PS-Dist/Dif Core2= 10VA, Accuracy class 0.2s-Metering Core3= 30VA , 5P20- Backup, No.s 3 2131.33 6394.00 4700.33 14100.99

2 11KV Class,25kA NCT of ratio 1200-600/1-1-1 A for REFR Protection ( similar rating & ratio as that of incomer of 11KV Switchgear ) with terminal connector suitable for 2 nos of copper plates as per technical specifications Note: 1)All the CTs in each kV class shall be of one and the same make for interchangeability & reliability of per:formance. 2)The make and characteristics of llkV NCT should be the same as that of the incomer CT of 1lkV Switchgear. To ensure this, the 11kV procured from the supplier of 11kV svñtchgear only. Nos 1 733.00 733.00 4545.00 4545.00

B5 Surge arrestors

SURGE ARRESTORS: (Porcelain housing) Metal Oxide Gapless type with rigid

1 96 kV, 1O KA, SM type-For Transformer No.s 3 444.00 1332.00

B6 Control and Relay panel complete

1 For Power Transformer 110/11KV Note: 1. All the C&R panels and the associated panels shall be of one and the same make for uniformity and interchangability of components. 2. The DLMS protocol energy meter/ electronic tri- vector meter with ABT features has to be provide on both HV side & LV side of C&R panel. No.s 1 5959.00 5959.00 42973.00 42973.00

B7 Station Structures: (Including bolt and nuts)

1 Supplying & erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.} complete set . ( 2 Nos for Feeders ) Set 2 3199.00 6398.00

B8 MOUNTING STRUCTURES

1 110 KV Isolators. Live Point Height -4600mm (0.752 MT per Structure). No/MT 01/0.752 5723.00 4303.70

2 110KV Current transformer (0.158 MT per Structure). No/MT 03/0.474 5723.00 2712.70

3 11KV NCTs. (0.157 MT per Structure). No/MT 01/0.157 5723.00 898.51

4 96 kV Lightening arrestors. (0.116 MT per Structure). No/MT 03/0.348 5723.00 1991.60

5 110 KV Pedestal insulators for Bus (0.14 MT per Structure). No/MT 01/0.140 5723.00 801.22

6 110 KV High pedestal insulators for transformer. (0.15 MT per Structure). No/MT 03/0.450 5723.00 2575.35

7 11KV UG cable terminating structure for LV side of transformer-(0.072 MT per Structure). No/MT 01/0.072 5723.00 412.06

8 11KV GOS/UG cable terminating structure for 11 KV Capacitor Bank- (0.158 MT per Structure). No/MT 01/0.158 5723.00 904.23

B9 BUS BAR FORMATION:

1 Formation of Bus for drake conductor Per Bay 2 12087.00 24174.00

2 Formation of Bus for coyote conductor Per Bay 3 7364.00 22092.00

B10 Insulators:

1 Post Insulator Solid Core insulator 110KV Class, 1 Unit/Stack No 4 444.00 1776.00

B11 COPPER CONTROL CABLE:- 1.1 kV Grade PVC Insulated armoured Copper Control Cable of sizes with lugs/ferrules/Gland as per technical specifications.

B12 11kV Switch Gear 0.00

11 kV, 25kA,Metal clad VCB switcñgear 1600A for incomer & 1250 A for feeders) outdoor type, each comprising of 1I/C+2F+1CB+1BC+ 1AP {remote annunciation cum control panel )with CTs & PTs etc., complete as per technical specification. Note: 1. Simplex type Annunciator panel shall be provided for switchgear (consisting of incomer, feeders and bus coupler). 2.for Capacitor Bank: 'The Capacitor Bank panel shall be same as that of the 11 kV bank i.e. incomer panel in all respect.In addition to relays provided in the I/C, the following addition relays to be provided. i)Circulating current relay with timer. ii} Under voltage relay. iii)Timer relay. Per panel 6 2,081.00 12486.00 8,039.33 48235.98

B13 11KV U.G. Cable with the required cable terminations at both ends.

1 11kV class 1 X 1000 Sq mm U.G. Cable XLPE (from 110/ 11kV transformers to 11kV switchgear) Mtrs. 200 29.00 5800.00

2 11kV class 3 X 240 Sq mm U.G. Cable XLPE (from 11kV switchgear to 11kV take off DP structure) Mtrs. 200 29.00 5800.00

3 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Indoor type) Nos. 4 3,752.00 15008.00

4 Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (outdoor type) Nos. 4 3,752.00 15008.00

5 Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Indoor type) Nos. 3 2,658.00 7974.00

6 Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (outdoor type) Nos. 3 2,658.00 7974.00

B14 Equipements for SCADA Communication as per actual material requirement given AEE/SCADA

1 Multi Functional Transducer (MFT) 3 Phase-4wire self powered 0.2S Class including labour (market rate) No.s 6 1,555.00 9330.00

2 Signal/communication Cables-Armoured copper core with 10 Core 0.5sqmm cross section multistrand (For MFT Integration & DI Wiring ) Mtrs. 250 25.00 6250.00

3 Control Cables-copper core with 10 core 1.5sqmm cross section multistrand armoured for DO wiring Mtrs. 120 25.00 3000.00

4 RYB & Black colour 2.5sqmm for CT/PT wiring. (Red=48 mtr Yellow=48 mtrs Blue=48 mtrs Black=24 mtrs Total =168 mtr ) Mtrs. 168 25.00 4200.00

5 Opto Coupler (110V DC,8i/p) including labour (market rate) No.s 4 1,555.00 6220.00

6 Wiring, installation,testing and commissioning for additional trf within 1IC+2F+1CB+1BC. No.s 1 37,689.00 37689.00

7 Integration to be done in RTU panel for additional trf within 1IC+2F+1CB+1BC No.s 1 27,011.00 27011.00

B15 Earth Mat formation

1 Supplying and laying MS Flat 50 x 6 mm flat welding and applying ACB paint to welded portion as per drawing/ standard if required (all other materials to be supplied by contractor) Rmtr. 2003 200.00 400600.00

2 Grounding of equipments with 50 x 6 mm G.I flat and connecting equipments to the earth mat/ ground pit including all connected works with all materials supplied by the contractor. Rmtr. 330 335.00 110550.00

3 Providing 25mm dia, 1.05mtr. long Earthmat Spike of MS Rod including bending top 50 mm etc Nos 70 453.00 31710.00

4 Providing C.I. Pipe ot l00 mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 5ox6mm clamp welded allround the pipe etc., including cost of excavation ( all materials supplied by contractor) Nos 11 16,283.00 179113.00

5 Supplying and fixing 450mm dia x 450mm to height 1.5" to 2" Hume pipe collars for earch pits. Nos 11 1499.00 16489.00

Karnataka Power Transmission Corporation Limited

SCHEDULE - 3B(iii) - Civil portion- Gajanur

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Work B: Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District on PTK Basis-Work Code-CD1121 ”

Sl. No. Item Description Unit Qty Unit Rate in Rs. Total Amount in Rs.

C1 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. (V1/Pg5/1.4.1) In all kinds of soils Depth upto 1.5 m Cum. 140.00 242.00 33880.00

C2 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6Using 20 mm nominal size graded crushed coarse aggregates Cum. 15.50 6,147.00 95278.50

C3 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications (V1/Pg15/2.2.3) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation add at 3% Cum. 38.50 6,413.81 246931.69

C4 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing, form work, centering & scaffolding and all the other appurtenances required to complete the work as per technical specifications M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates For foundation add at 35% Cum. 4.35 8,406.45 36568.06

C5 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.. Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates Cum. 5.9 6,166.00 36379.40

C6 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification All other type of structures Kgs. 1595.00 80.01 127615.95

C7 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum. 36.00 266.00 9576.00

C8 Removing and Re-spreading Existing Jelly in Station Yard : Removing the existing Jelly in the Station Yard, stocking and Respreading after completetion of Equipement foundations etc.,.( Area 23.00 X 11.50= 264.50 Smtr. + 11.00 X 7.50 = 82.50 Smtr. + 20.00 X 3.00 = 60.00 Smtrs.) Total = 407.00 sqmtr. Sqmtr. 907.00 53.00 48071.00

C9 Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. Kgs. 3428.00 108.00 370224.00

C10 Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Cum. 17.50 6,364.00 111370.00

C11 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Sqmtr. 32.00 351.00 11232.00

C12 Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. Sqmtr. 16.00 255.00 4080.00

C13 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqmtr. 123.00 568.00 69864.00

C14 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm) Rmtr 7.00 451.00 3157.00

C15 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. a) Short point up to 3Mtr from tapping point to out let via switch box Point 4 285.00 1140.00

C16 Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box Point 2 394.00 788.00

C17 Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4' - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition Nos 5 1269.00 6345.00

C18 Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall/ ceiling / Rafter / Girders Each 5 122.00 610.00

C19 Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 25mm dia 2mm thick (V6/P3/Pg2/1.2.2) Rmtr. 30 78.00 2340.00

C20 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 2.5 sqmm Rmtr. 30 42.00 1260.00

C21 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS 694:201 4 sqmm Rmtr. 30 63.00 1890.00

C22 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket Each 2 236.00 472.00

C23 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Switch 6A One Way Switch Each 6 102.00 612.00

C24 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plate swith due groove cutting in Brick/C.Cwall, including necessary rawl plugs, Machine/NF screws etc., complete. 8 Way Each 2 219.00 438.00

C25 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,complete on the existing metal/PVC box. 8 Module Each 2 284.00 568.00

C26 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.. Each 2 5454.00 10908.00

C27 Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixing the cover in C.C. 1:2:4 and C.M. 1:3 plastering 20 mm thick to all expose faces, curing for 10 days with all lead and lift with appurtenances. complete. medium Duty (600 X 600 mm) Set 2 1914.00 3828.00

C28 Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. RCC NP3 Class pipe of 300 mm dia. for Cable duct E & F Type Each 30 1332.00 39960.00

C29 Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. Cum. 114 262.00 29868.00

C30 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 Rmtr 30 411.00 12330.00

C31 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the Excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 63mm dia., 6 kg/sqcm & class 3 Rmtr 30 161.00 4830.00

Total 1322414.59

Karnataka Power Transmission Corporation Limited

SCHEDULE - 4 ( MANDATORY SPARES )

SHEET FOR TECHNOCOMMERCIAL OPENING (UN - PRICED)

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Bidders Name and Address along with GSTIN No.: To,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Price Breakup for Mandatory spares as per Annexure - 4 of Section - I, General, Volume - II.

Sl. No. Item Description Unit Total Qty. Indicate whether "Own Manufactured" or "Bought out item"

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-5 COMMERCIAL DEVIATION

SHEET FOR TECHNOCOMMERCIAL OPENING

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

Please fill Only in the Light Blue Couloured Cell.

Please key in the SlNo.,Section , Clause , Description as given in bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening. Please refer Vendor Manual attached for further details.

For any further assistance for submitting your bids please call up KPTCL Office.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. : To

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

I/we have read each of the Clauses mentioned in INVITATION FOR TENDERS , INSTRUCTION TO TENDERERS , CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT and COMMERCIAL TERMS AND CONDITIONS and all the sections of Bid documents.

The following are the commercial Deviations and Variations from and exceptions to the Specifications and documents for

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

These deviations and variations are exhaustive. Except these deviations, the entire work shall be performed as per your specifications and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE-6 : TECHNICAL DEVIATION

SHEET FOR TECHNO-COMMERCIAL OPENING

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

Please key in the SlNo., Section , Clause , Description as given in Bid sheets and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening.

For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents for

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

These deviations and variations are exhaustive.Except these deiviations and variations, the entire work shall be performed as per your specification and documents.

Sl. NO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Place Designation

Name of the company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE 7(List of special tools and tackles )

SHEET FOR TECHNOCOMMERCIAL OPENING

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

Bidder's Name & Address alongwith GSTIN no. : TO,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

List of special tools and tackles the price of which is included in bid price.

Sl. No. For equipment Description of item Unit Quantity

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SHEET FOR TECHNOCOMMERCIAL OPENING

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

NOTE: 1 ) SHALL BE UPLOADED WITHOUT PRICES

Bidder's Name & Address alongwith GSTIN no. : To,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

We have enclosed(uploaded) with our proposal the following additional information.

Sl. No. Brief Description of information Ref. and Page No.

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (1 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

Please fill Only in the Light Blue Couloured Cell.

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

a) * We have uploaded bid as individual Bidder. (Key in Individual Bidder )

b) * We have uploaded bid in Consortium with the following Bidders. (Key in Consortium ) VOID

Name of Consortium Partner Scope / Participation of each Consortium Partner

(* Fill-up whichever is applicable)

1.0 GENERAL INFORMATION

The Bidder, bidding for this package are requested to complete the information in the following form.

Sl.No. Particulars Bidder details

1 Name of the Firm

2 Address of Head Office / Registered Office GST no.

5 Name of Contact person with Designation

6 Place of Incorporation/Registration

7 Year of Incorporation/Registration

8 Constitution or legal status of Tenderer [Upload copy]

9 Place of Registration [Upload copy]

10 Principal place of business

2.0 We are furnishing the following details/documents in support of Qualifying requirement for above mentioned project

Sl.No. Bidder details Indicate Yes /No

(a) Written power of attorney of the signatory on the bid to commit the bidder. In case of Consortium

1 Furnished / Not

2 Uploaded / Not

(b) Certificate of Registration of the Company. Please mention the date of incorporation of the company

1 Uploaded / Not

(c ) Valid Super Grade Electrical Contractor’s License issued by the Government of Karnataka as on the date of techno commercial Bid opening. Please mention the date of expiry of the License certificate issued by GOK/ Undertaking to this effect

1 Uploaded / Not

(d) Self declaration regarding Litigation w.r.t KPTCL contracts over the last five years (refer ITT)

1 Uploaded / Not

(e) Self declaration for ‘not being disqualified regarding non-performance in any of the Government utilities in the past five years’. (refer ITT)

1 Uploaded / Not

(f) An undertaking to source the supply of equipment/ material from KPTCL approved vendors only as per QR for Vendor registration, available in the KPTCL website ie., kptcl.karnataka.gov.in, Link Tendering & Procurement-Application for Vendor.

1 Uploaded / Not

(g) Self declaration regarding no action against the bidder have been taken by KPTCL in respect of Risk & Cost clause

1 Uploaded / Not

(h) Self declaration regarding 'Eligibility clauses in respect of restrictions on procurement from a bidder of a country which shares a land border with India as per Annexure-XVI

1 Uploaded / Not

(i) Self declaration regarding RESTRICTIONS ON SOURCING OF EQUIPMENTS/MATERIALS BY THE BIDDER FROM A VENDOR OF A COUNTRY WHICH SHARES A LAND BORDER WITH INDIA as per Annexure -XVII

1 Uploaded / Not

Section 3 : 1.3 Work performed of similar nature in the last Five years, preceding the date of Bid submissionof Bidder (Clause No: 3.2 (b) (i) & (ii) of ITT) - In respect of Sub Station portion and Transmission Lines resp.

Project Name Name & Address of the Employer Description of Work Voltage class Number of Sub-Stations/Length of the Line Contract Number Value of contract Rs. Lakh Date of issue of work order Specified period of completion Actual date of commissioning Remarks explaining reasons for delay in commisioning of work

Note : 1 . The documentary proof of fulfilling the qualifying requirements shall be uploaded along with the bid. The bidder shall upload the P.O,LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer along with the bid.

2. The qualifying experience of the Bidder who is having qualifying experience shall be furnished in the above performa and Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

3. IF this sheet is insufficient for furnishing the qualifying experience of the Bidder then similar sheets shall be seperately uploaded.

Date Designation

Place Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (2 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Section 3 : 1.5 Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender of a Bidder

(A) Existing commitments and on-going works:

Description of work Place & State Contract No & Date Name and Address of Employer Value of contract (Rs. Lakh) Stipulated period of cof Completion Value of works remaining to be completed ( Rs.Lakhs) (Attach Certificates from Engineers –in- Charge) Anticipated date of commissioning

Note:Attach Certificates from Engineers –in- Charge

B)Works for which Tenders already submitted

Description of work Place & State Name and Address of Employer Estimated value of works (Rs. Lakh) Stipulated period of Completion Date when decision is expected Remarks if any

i) The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

ii) A self-declaration is to be uploaded by the bidder stating that "the information with regard to assessed available tender capacity (Works on Hand) furnished are correct”.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (3 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Following is the list of major supplied subsation equipments/accessories which are type tested and designed, manufactured by us in accordance with internationally recognised standards.

Sl. No. Item rating, type and Designation Qty Customer Date of Order Date of Supply Date of Commissioning Ref. of Cusomer's certificate of successful operation enclosed Ref. of layout & Customer's certificae for successful commission

Note: Documentary Proof in support of above shall be uploaded in the form of certificates issued by authorized officers of concerned organisations.

Place Designation

Name of the Company

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE - 9 (4 of 5) : QUALIFYING REQUIREMENTS

SHEET FOR TECHNOCOMMERCIAL OPENING

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

BIDDER'S NAME AND ADDRESS: To

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

Section 3 : 1.7 Reports on the financial standing of the tenderer, such as Profit and Loss Statements and Auditor’s reports in the preceeding last five years, Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates duly certified by chartered Accountant as documentary evidence shall be uploaded.

SLNo. Particulars Year Lead Bidder Consortium Member

Mention Year Amount(Rs.) Mention Year Amount(Rs.)

Names of the constituent Firms VOID

1 Annual turn over for the last Five years Year(1) 2020-2021

2 Liquid Assets / Credit availability or access to evidence of assets

3 Whether Audited Balance sheets and Profit & Loss statement are enclosed for the last Five Years ? (yes/No)

4 Whether Bankers certificate enclosed for credit facilities? (Yes/No)

Place Designation

Name of the Company

Karnataka Power Transmission Corporation Limited

WORK INDENT NO: KPTCL/2026-27/SS/WORK_INDENT4024

SCHEDULE - 9 (5 of 5) : QUALIFYING REQUIREMENTS

Combined package of following works on PTK basis: 1. “Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV McGann Hospital substation in Shivamogga Taluk & District-Work Code-CD1120” 2. Providing additional 1X10MVA, 110/11kV Power Transformer at 110/11kV Gajanur substation in Shivamogga Taluk & District-Work Code-CD1121 ” Note: 10 MVA PTR and 11kV switchgear will be supplied by KPTCL for above works.

BIDDER'S NAME AND ADDRESS: TO,

The Chief Engineer (Elect.), Transmission(Operations) Zone, KPTCL, Prasarana Bhavana, Third Floor, Santhepete, B.M.Road, Hassan-573201

The information to be filled in by the Tenderer hereunder will be used for purposes of computing Tender capacity as provided for in Clause 3 of the Instructions to Tenderers. This information will not be incorporated in the Contract.

1.1 Constitution or legal status of Tenderer [Upload copy] aee2

Place of Registration [Upload copy] aee2

Principal place of business

Section 3: 1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last five years (in Rs. Lakhs)

1.2 Total value of works executed (KPTCL & NON KPTCL works) and payments received in the last five years (in Rs. Lakhs) of Bidder Financial Year Details

KPTCL works Non KPTCL works

Total value of works in Rs. Lakh Total value of works in Rs. Lakh

Note: Attach relevant Certificate/s from Chartered Accountant.

Section 3: 1.9 Name, address, and telephone, telex, and fax numbers of the Tenderers' bankers who may provide references if contacted by the Employer.

Sl.No Name, address, and telephone, telex, and fax numbers of the Tenderers' bankers

1.12 Information on litigations in which the Tenderer is involved:

Other Party(ies) Employer Details of Dispute Amount involved Remarks showing Present Status

Name of the Company