REPAIR MAINT TO PLASTERING FLOORING TILING BRICK WORK PLUMBING SANITARY FITTINGS ETC FOR TEMP BLDS AT RR SECT AND ASC COY SUP TYPE D OF AGE BR P AT KHANABAL UNDER GE 861 EWS

Amount

Dismantling of CGI/PGI Sheet fixed with screws as in roof covering complete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, pilasters etc. complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre,pulp,insulation,etc)or insulation boards /slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling of unframed timber scantling under 40 Sqcm, fixed in any position in fillet rails, posts rafters purlin etc complete all as specified and directed.

Dismantling of unframed timber scantlings 40 Sqcm and over in section in any position complete all as specified and directed

Taking up or down 15mm dia GI Tubing and connection complete all as specified and directed

Taking up or down 20mm dia GI Tubing and connection complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty of fixed with beads as specified and directed by Engineer-in-Charge.

Taking down of chowkats or frames n exc 1.5 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed

Taking down of chowkats or frames exc 1.5 Sqm but n exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed

Taking down shutter of any description n exc 1 sqm each

Taking down shutter of any description exc 1 sqm and nexc 2 sqm each

PCC (1:2:4) type B-0 (Using 12.5 mm graded aggregates), as in flooring 25 mm thick complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 Type C-2 (40 mm graded aggregate) as in sub-floor, sub-base, floor and paving's, etc. complete all as specified and directed

M&L in repair 19mm prelaminated particle board ,interior grade ,prelaminated one side with decorative choice lamination and on other side balancing white lamination fixed with secrews to timber frame work complete all as specified and directed.

M&L galvalume aluminium zinc coating Pre-painted GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ Cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L galvalume aluminium zinc coating Pre-painted GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/Cladding to wall, ridge and eaves board, fixed with self tapping screws as in specified complete all as specified and directed

S&F 450x350x7mm size coloured glazed wall tiles set and jointed in neat cement slurry and pointed with colored cement to match as in vertical surface including 15 mm thick rendering in CM 1:4 on vertical surface to receive wall finishes complete all as specified and directed.

S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over 15mm thick screed bed or bedding layer in CM 1:6 for laying finishes, complete all as specified as directed by Engr-in- Charge and approved by GE.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thick screed bed in CM (1:6) and rubbing and polishing complete all as specified and directed.

M&L for coloured chequered cement concrete tiles 30cm x 30cm x 22 mm thick, with grey cement & pigments set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in cement mortar (1:6) and laying floor finishes complete all as specified and directed by Engineer-in-Charge.

M&L brick work with old size sub class B brick straingt or curved on plan exc 6 m mean radius built in cement mortar in CM 1:6 complete all as specified and directed

M&L Rendering 10 mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L preparation of new Plaster surface surface of wall and applying three coat of white wash complete all as specified and directed

M&L 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed

M&L 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in wall with nails to timber frame complete all as specified and directed

M&L 6mm thick plywood grade BWR type BB fixed in wall with nails to timber frame work complete all as specified and directed.

M&L 6 mm thick plywood grade BWR type BB fixed in ceiling, flat or sloping, with nails to timber frame work complete all as specified and directed.

M&L prelaminated wooden flooring with 8 mm thick partical board planks with tongue and groove joints of size as directed over 3mm thick thermocoal sheet set with adhesive of approved make as per manufacturer's instructions over finished surface including taking down old wooden flooring complete all as specified and directed

S&F 2nd Class soft wood plain fillets square rectangular or triangular in section clean sawn fixed with nails sectional area exc 13 but not exc 25 sqcm complete all as specified and directed

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails exc 3 Sqcm and n exc 6 Sqcm bull nosd,splayed,chamfered or rounded on one edge or face complete all as specified and directed

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10cm width or girth including preparation of new and old surface complete all as specified and directed.

S & F in repair 15mm dia pillar taps, cast copper alloy, with capstan head, screwed down high pressure , screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 10 litre PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engr-in -Charge.

S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc complete all as specified and directed.

S & F in repairs, vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc including PVC seat cover white with flat bottom etc complete all as specified and directed.

S&F in repair brass float valve 20 mm bore, high pressure with polythene ball & float complete all as specified and directed

S&F 15mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors complete all as specified and directed.

All as per srl item No 41 but except pipe complete all as specified and directed.

S&F 20mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors complete all as specified and directed.

All as per srl item No 43 but except pipe complete all as specified and directed.

S &F in repair Vitreous China wash basin, size 550 x400mm white, flat back, including cutting for and pinning in ends of brackets or erecting stand including 32 mm waste fittings, chromium plated with long screwed shanks & fly nuts, flange end bedded in red lead cement and other end fixed.

S&F in repair 15 mm fancy type CP Pillar Taps, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repairs 15mm bore fancy type CP Bib taps long body cast copper alloy with capstan head screw down for iron pipe or for brass furrel complete all as specified and directed

S & F in repair for 15mm bib tap standard of PTMT any colour screwed for iron pipe and fixed. (Minimum weight 15mm-90 gms / 20mm-125gms) complete all as specified and directed.(make prayag)

M &L for preparation of old surfaces of walls, plastered or unplastered including brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed

M &L for preparation of old surfaces of ceiling, plastered or unplastered including booming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed

M &L for preparation of old surfaces of walls, plastered or unplastered including booming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on walls complete all as specified and directed

M &L for preparation of old surfaces of walls, by washing, rubbing down and scraping of distemper surfaces and applying one coat of oil bound distemper (oil emulsion) white or tinted on walls complete all as specified and directed

M &L for preparation of old painted wood or wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enameled paint complete all as specified and directed

M &L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enameled paint complete all as specified and directed

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty or wooden beads in square n exc 0.50 sqm in each pane complete all as specified and directed

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F 2nd class soft wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 2nd class soft wood (Kail) in scantling clean sawn and fixed complete all as specified and directed

S&F 35 mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both faces incl 6mm thick 1st class HW (Teak wood) beading all around on edges. complete all as specified and directed

S& F 2nd class hard wood Plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers 35 mm thick complete all as specified & directed by Engr-in-Charge

S&F 30 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitered beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats

S&F aluminium handles, anodised, cast type, of size 150mm complete all as specified and directed

S&F Mild steel barrel tower bolts stove enamelled black with bright bolts fixed of 150mm length complete all as specified and directed

S&F Mild steel barrel tower bolts stove enamelled black with bright bolts fixed of 125mm length complete all as specified and directed

S&F butt hinges 100mm size mild steel medium weight complete all as specified and directed.

S&F butt hinges 75mm size mild steel medium weight complete all as specified and directed.

S& F in repair 300mm helical door springs, including roller and roller plate complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts or extruded etc length of bolt 250mm complete all as specified and directed

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm & fixed with stainless steel wire staples in repairs complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick plaster on brick or concrete surface in cement mortar 1:4 on finished even and smooth with using extra cement complete all as specified and directed

Preparation of new surfaces of walls plaster of any description over 10cm width or girth applying two coat of cement base paint over one coat of primer complete all as specified and as direcetd.

M/S A.N CONSTRUCTIONs

JANDOO AND CO.

M/S GH MOHAMMAD DAR

M/S MOHD SHABAN SHEIKH

M/S AK ENTERPRISES