WELCOME MAINTENANCE AND MISC B/R WORKS IN MD ACCN AT AF STN ARJAN SINGH UNDER GE (AF) PANAGARH

Amount

M&L for preparation of old plastered of surfaces of walls including washing rubbing down and stopping of old distempered and painted wall surfaces including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and treating oil and greasy spots and applying one coat of washable acrylic distemper (premium quality) on old surfaces including filling and making surface smooth and making good chipped off surfaces as required complete all as specified and directed. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for complete removal of existing treatment of walls by washing down and smoothing old surface and applying two coats of oil bound distemper (premium quality) over one coat of alkali resistant primer paint over a layer of smooth wall putty finish punning 2 mm thick strictly as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for Preparation of old plastered surfaces of ceiling and applying one coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted wooden and wood based surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified and directed.

M&L for preparation of old painted steel surfaces of roof sheet of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work, finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work, finished fair and even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surface, as in ceiling and finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper (premium quality) over one coat of alkali resistant primer paint as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper (premium quality) over one coat of alkali resistant primer paint over a layer of smooth wall putty finish punning 2 mm thick strictly as per manufacturer instruction with smooth roller finish complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

M&L for preparation of newly plastered surface of wall and applying two coats of exterior emulsion paint (Apex ultima) over one coat of alkali resisitant primer paint over a layer of smooth wall putty finish punning 2 mm thick strictly as per manufacturer instruction complete all as specified and directed by GE. (Note:- After painting works, cleaning of all floors, glass and furniture by own arrangement)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 20 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm. as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 10 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x250x7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for 20mm thick granite stone slab (of any type) work (table rubbed and polished) in skirting/dado, steps, pillars, window sills, cooking platform laid over 20mm thick bedding in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab including rounding edges of granite slab after dismantling of old unserviceable/ broken slab as directed by Engineer-in-Charge as required at site complete all as specified and directed.

S&F for aluminium beading inculing gasket etc (fixing in existing aluminium door shutter) complete as in repairs all as specified and directed.

Repair to exisiting steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable condition complete all as specified and directed. (Note: Rates for all necessary requirement for this repair work are inclusive in this item)

S&F for 15mm bore fancy type chromium plated angle stop valves, cast copper alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule and fixed complete as in repair all as specified and directed.

S&F for 15mm bore pillar tap fancy type cast copper alloy with capstan heads chromium plated screwed down or high pressure with or without lettered hot or cold with long screwed shank and fly nuts for iron pipe fixed complete as in repair all as specified and directed.

M&L for 15mm dia bib tap cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed for iron pipe complete as in repair all as specified and directed.

S&F for PVC connection 15 mm dia with PTMT nuts of length 450mm at both ends screwed for iron pipe of 15 mm bore complete as in repair all as specified and directed.

S&F for 20 mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete as in repair all as specified and directed.

S&F for PVC low level flushing cistern 10 ltrs capacity white with inlet ball valve, float valve and handle including providing & fixing MS angle iron brackets, PVC flush pipe complete as in repair all as specified and as directed.

S&F for plastic water closet seat, white/coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete as in repair all as specified and directed.

S&F for vitreous China water closet Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests with loose cast iron or vitreous china earthenware, 'P' or 'S' trap, connecting pipe to union of flushing cistern, inlet and overflow pipes connecting only to flushing cistern, including taking down old SWR pipe as required complete as in repair all as specified and directed.

S&F for vitreous China water closet pan (squatt pan) pedestal pattern white with 'P' or 'S' trap including fixing seat and cover for pedestal pan, providing and fixing PVC valveless, syphonic action type, flusing cistern, low level, white, with inlet, ball valve, float and handle including brackets, brackets, chain and pull or lever handle, flushing piep of steel tube or polyethylene inclduing jointing to socket of flushing rim (with and including India rubber cone joint, if flushing rim connection is nozzle pattern) and connectiong pipe to union of flushing cistern, inlet and overflow pipes connecting only to flushing cistern, including taking down old SWR pipe as required complete as in repair all as specified and directed.

M&L for 32mm bore brass chromium plated waste coupling fitting for kitchen sink/WHB any type fixed complete as in repair all as specified and directed.

S&F for 125mm dia gratings with/without waste hole, fixed complete as in repairs all as specified and directed.

S&F for 15 mm bore galvanized iron GI tubing (medium grade) with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors complete after taking down old unserveciable 15mm dia GI pipe with fittings all as specified and directed.

S&F for 20 mm bore galvanized iron GI tubing (medium grade) with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors complete after taking down old unserveciable 20mm dia GI pipe with fittings all as specified and directed.

Taking down PVC/CI pipe jointed in cement mortar, taking out wall and eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S & F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F for 110mm bore PVC SWR bends with access door complete all as specified and directed.

S&F for 110mm bore PVC SWR Junction single (Single T) Equal or un-equal with access door complete all as specified and directed.

S&F for 110mm bore PVC SWR vent cowl with access door complete all as specified and directed.

S&F for stainless steel plate rack of size 1200mmx 900mmx1mm thick as in repair complete all as specified and directed. (Note : Payment shall be made after receipt of purchase voucher duly enter in measurement book).

M&L for demolition of PCC including WC and removal from sunken floor, cleaning top of the RCC slab and peripherial beams, rendering 15 mm thick in cement mortar (1.3) with Lilquid water proofing compound as per manufacturer instruction (to be messured and paid separately as supply only) without using extra cement with directed slop and allowed to dry, application of two coats of polymer modified cementaticious (1/8 inches over all thickness in two layers) as directed, placing of GI spout of 25 mm dia and projected 300 mm apart from outer wall surface, flooding test for 72 hrs on dried surfacet, after passing the test by Engr-in-Charge, filling the sunken floor with lean cement concrete (1:5:10) using cinder up to required depth but sorrounding of WC pan will be filled with lime concrete and finished the surface using 40 mm thick PCC (1:2:4) finished the surface even and rough to receive top layer complete all as specified and as directed (Note: Props to be placed on the bottom of the sunken slab before starting the work)

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in cement concrete (1:3:6) type C1, using 20mm stone aggregate and connecting to waste pipe complete as in repair all as specifed and directed. (Note: cost of cement concrete work included in this item.)

Disconnecting the existing PVC tanks of capacity exc 250 Ltr but not exc 500 Ltr, setting aside (or lowering if required) for repairs, dewatering, cleaning with wire/brush/jude/ cloths, removing all dirt and scale and algae formation inside the tank by using Calcium hypo chlorite granular / bleaching powder etc. with the help of cleaing mechine/ manually etc. including writing with white paint over the tank as ""TANK CLEANED ON"" with date, month and year with a minimum of 8 cm height in capital letters/ numbers and hoisting if required, reconnecting & refixing in position complete all as directed by Engineer-in- Charge. (Note:- Cost of labours and all material requried for cleaning the tank are inclusive in this item.)

All as per srl item No 42 above but capacity exc 500 ltr & n exc 1000 Ltr complete all specified and directed.

A.R. ENTERPRISE (BID ID -3332180)

BUILDWELL CONSTRUCTION (BID ID -3325984)

ROY ENTERPRISE (BID ID -3319212)