NIT No. 13 (22-23) Item No. 2

Making the Base Frame and R.C.C Foundation of Pump Set No. 05(7.4MGD) and thereafter installation, Testing & Commissioning of newly Pump at Ghonda-II SPS with following works:- Safety arrangement Air Face Mask, Helmet, Gum Boots, Hand Gloves etc arranged by the firm at site of work for safe working.

Dismantling of existing Pump set No. 05 from the foundation by removing of all electric connection, disconnection of pipe fitting from Suction & delivery System with the help of cutter set, manual labour, tools & tackles etc. including covering the suction & delivery pipes sizing 500/500mm dia with M.S blank flange and keep the dismantled pump set a suitable place. The whole work shall be carried out under the supervision/direction of Engineer-In- charge.

Dismantling of existing M.S. base frame from the RCC foundation by the cutting of foundation nut bolts & studs with the help of gas cutter, required tools etc. under the supervision of Engineer-In- charge.

Braking of RCC foundation by power hammer, chisel and other tools & tackles as per site requirement and also removing the broken material from P/H and disposing the same in eco manner way as per the guidelines of Govt. authorities.

Making of RCC foundation having size (3.38mX 1.50mX 0.78 m) by cement concrete, using Shuttering &steel reinforcement work i/c foundation bolt with threaded and heavy-duty nut with washer. (Sizing700 x 25 mm - 8 Nos.) and as per the site requirement/direction of Eng.-In-charge)

Making of M.S. base frame made out by the M.S C- Channel of Size (200 mm x 90 mm), 10mm thick (size of frame 2.90 m x 1.19 m) and support of Motor base frame using by M.S C-Channel and M.S Plate of Size (0.91m x 0.30m), 10mm thick- 02 Nos., (1.30m X 0.30m),20mm thick- 02 Nos. & (0.30m X 0.20m), 20mm thick- 04 Nos. and as per site feasibility/requirement & as per the direction of engineer In Charge.

P/Fixing of 01 No. M.S bend (300mm X 300mm dia), 10mm thick with both side flange and M.S Reducer 02 Nos. (300mm X 500mm dia), 10mm thick with both side flange and length as per the site requirement & as per the direction of Engineer In charge.

S/o neoprene packing.

S/o Nut bolt, Washer etc.

S/o Tyre Coupling No. TC/J/021. Make:-Unique/Fenner/DJB approved.

Installation/fitting of pump-set on newly augmented base frame with the help of nut bolts and rubber packings, removing of blank flange and thereafter connection with existing suction & delivery lines through reducer/required pipe fittings, coupled the pump with motor.

Painting charges of the complete system.

Testing & Commissioning of complete system on full load.

Raj Engineering Co.

M/s S.G. Enterprises