SPECIAL REPAIR TO BLDG NO. P-633 AND OTHER MINOR AND REVENUE WORKS AT JAISALMER MIL STN

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed by the Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/disintegrated rock complete all as specified and directed by the Engineer-in-Charge.

Returning filling in soil including spreading, levelling and well ramming in layers n.exc 25cm thick in layer etc complete all as specified and directed by the Engineer-in-Charge.

Returning filling in soil/disintegrated rock including spreading, levelling and well ramming in layers n.exc 25cm thick in layer etc complete all as specified and directed by the Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.

Removing excavated soft/disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.

M&L for PCC ( 1:4:8) Type D-2 using 40 mm graded aggregate as in foundation, filling and mass concrete complete all as specified and directed by the Engineer-in-Charge.

M&L For Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed by the Engineer-in-Charge.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by the Engineer-in-Charge.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing path & finishing the surface even & fair without using extra cement complete all as specified and directed by the Engineer-in-Charge.

M & L for Pre-cast cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar {1:4) complete all as specified and directed by the Engineer-in-Charge.

M & L for precast cement concrete solid block masonry exc 10cm in width and setting in CM 1:6 type C1, 1:3:6 complete all as specified and directed by the Engineer-in-Charge.

M&L rendering 15mm thick in 1:6 cement plaster on fair faces of brick work or concrete surfaces is to be finished even and smooth (without using extra cement) complete all as specified and directed by the Engineer-in-Charge.

M&L rendering 15mm thick in 1:4 cement plaster on fair faces of brick work or concrete surfaces is to be finished even and smooth (without using extra cement) complete all as specified and directed by the Engineer-in-Charge.

M&L for 10 mm thick , plaster in cement mortar (1:4) on surfaces of ceiling and finishing the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of walls and apply two coats of distempering oil emulsion over a coat of primer complete all as specified & directed by Engineer-in-charge.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified & directed by Engineer-in-charge.

M&L for Jaisalmer stone , (polished) of any type) 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , exc 0 .72 sqm but not exc 1.44 sqm, including cutting and polishing types in floors and vertical surface including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified and directed by the Engineer-in-Charge.

M & L for Jaisalmer stone , without polished (of any type) 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , exc 0 .72 sqm but not exc 1.44 sqm ,including cutting and in floors and vertical surface including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified and directed by the Engineer-in-Charge.

M & L for Jaisalmer stone for wall cladding (of any type) 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , exc .0.06 sqm but not exc 0.11 sqm ,including cutting and polishing types in wall including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified and directed by the Engineer-in-Charge.

S&F Aluminium anodised frame for doors, windows, ventilators and partition in room with one or more rebates including joining cleat for fixing etc complete all as specified and directed by the Engineer-in-Charge.

S&F aluminium anodised window and ventilator shutters, fixed type without sash bar aluminium section wt 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised snap beading, screws etc complete all as specified and directed by the Engineer-in-Charge.

S&F Anodised aluminium door shutters, aluminium section wt 0.55 kg/m including necessary jointing cleats ,glazing clips rubber neoprane packing ,handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc complete all as specified and directed by the Engineer-in-Charge.

S&F 5.5mm thick sheet glass, ordinary quality and glazing in squares exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in-charge.

S&F 5.5mm thick sheet glass, ordinary quality and glazing in squares not exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in-charge.

S&F Aluminium anodised butt hinges 125mm long complete all as specified and directed by the Engineer-in-Charge.

S&F 100mm brass 4 Levers mortice lock vertical type complete all as specified and directed by the Engineer-in-Charge.

S&F Aluminium (Die cast ) body door closer hydraulically regulated, desigantion No. 3, universal type, Suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80Kg complete all as specified and directed by the Engineer-in-Charge.

S&F Brass 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by the Engineer-in-Charge.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by the Engineer-in-Charge.

S & F for 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by the Engineer-in-Charge.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by the Engineer-in-Charge.

S&F anodised aluminium snap grid frame work 605x605mm for false ceiling and hangers 6mm dia, GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long including 12mm thick Gypsum board fixed with screws complete all as specified and directed by Engineer-in-charge. Note :- (i) Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm. (ii) Rate quoted by the contractor shall deemed to inclusive of frame work & ceiling board complete.

M& L for preparation of ceiling surfaces and apply two coats of Oil bound distemper complete all as specified and directed by the Engineer-in-Charge.

M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base of floors & finishing the surface even & smooth without using extra cement complete all as specified and directed by the Engineer-in-Charge.

S&F vitrified ceramic tiles light shade /double charged/ultra charged as directed, 10mm thick (square /rectangular), coloured, polished, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm ( actual size of tile shall be 600x 600x8mm thick), in floors etc. set with and incl provison of suitable chemical adhesive of 3mm thickness (usage of adhesive shall not be less than 3 Kg/ sqm ) and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles & floor tiling incl chemical over and including screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. complete all as specified and directed by Engineer-in-charge.

S&F glazed ceramic coloured tiles of size 350 x 250mm x 7mm /450mmx300mmx7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed by Engineer-in-charge.

M & L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types complete all as specified and directed by Engineer-in-charge.

M&L for 5cm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete all as specified and directed by Engineer-in-charge.

M&L for 50 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25&3 parts of sand by weight complete all as specified and directed by Engineer-in-charge.

S&F mild steel, chromium plated curtain rod cut to size 20mm dia with holder/bracket, stops, rollers etc, complete all as specified and directed by Engineer-in-charge.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

S & F Joist, channel, angel or tee sections, fixed independently , without connecting Fe-410-W(Gde-E-250) plates etc complete all as specified and directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge.

M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of new plastered surfaces and chalk whiting in plaster surfaces as in wall, applying three coats of white wash complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces as in ceilings, applying three coats of white wash complete all as specified and directed by Engineer-in-charge.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-charge.

M&L for brick work with fly ash modular bricks, straight or curved on plan exc 6 m mean radius , built in CM : 1:6 complete all as specified and directed by Engineer-in-charge.

M&L mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates,Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-charge.

M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete complete all as specified and directed by Engineer-in-charge.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for levelling course for consolidated thickness of average 75mm thick complete all as specified and directed by Engineer-in-charge.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed by Engineer-in-charge.

M&L for Non skid ceramic tiles , Light Shade, 7-8 mm thick (square/ rectangular) polished, area of each tiles exc 0.11 sqm but not exceeding 0.18 Sqm, in floor/skirting etc set jointed and pointed in white or coloured cement to match the colour of tiles over and including screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. complete all as specified and directed by Engineer-in-charge.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening complete all as specified and directed by Engineer-in-charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suplying & fixing in the frame at site complete all as specified and directed by Engineer-in-charge.

S&F SS hinges, 100mm size and fixed complete all as specified and directed by Engineer-in-charge.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 125mm complete all as specified and directed by Engineer-in-charge.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 200 mm complete all as specified and directed by Engineer-in-charge.

Supply and fixed aluminium handles, cast type, anodised 150 mm size complete all as specified and directed by Engineer-in-charge.

Supply and fixed aluminium handles, cast type, anodised 125 mm size complete all as specified and directed by Engineer-in-charge.

S&F steel ventilator top hung shutter including hinges and steel peg stay complete all as specified and directed by Engineer-in-charge.

S&F sheet glass 4 mm thick ordinary quality and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-charge.

M&L for roughly squared stone 5cm thick as in lintels n exc 3m in length, hammer dressed on face and soffits, hoisted, set and pointed in lime mortar 1:3 or cement mortar 1:6complete all as specified and directed by Engineer-in-charge.

Supply and fix double layerd rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,1000 ltr capacity complete all as specified and directed by Engineer-in-charge.

S & F 20mm Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer-in-charge.

S&F 15mm bore steel water tubing (ISI marked) medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

S&F 20mm bore steel water tubing (ISI marked) medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore dia of pipe complete all as specified and directed by Engineer-in-charge.

S&F stop cock cast copper alloy but fancy type and chrominum plated with long shank and cup (concealed type) fixed in 15mm bore dia of pipe complete all as specified and directed by Engineer-in-charge.

S&F 15 mm bib taps fancy type cast copper alloy with crutch with butter fly handle, screwed for iron pipe or brass ferrule, complete all as specified and directed by Engineer-in-charge.

S&F pillar taps 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed by Engineer-in-charge.

S&F Viterious china White Wash Hand Basin 450 x 300mm fixed including 32 mm brase CP waste fitting, PVC waste pipe 32 mm dia, 450mm long PVC connection 15mm dia complete all as specified and directed by Engineer-in-charge.

S&F Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed by Engineer-in-charge.

S& F Soap dish, size 160 x 160x 90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-charge.

S&F CP Shower rose 125mm size with swivel joint including fixing sted pipe for union complete all as specified and directed by Engineer-in-charge.

S &F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-charge.

S&F PVC flushing cistarn 10 ltrs capacity ISI marked incl PVC damtake pipe complete all as specified and directed by Engineer-in-charge.

S & F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed by Engineer-in-charge.

S&F PVC connections 15 mm size with PTMT nuts to length 450 mm complete all as specified and directed by Engineer-in-charge.

Cutting holes in to or through in brick or stone walls built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B1 as required, exc 150sqcm & n exc 400 sqcm complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia out let complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) pipes of 110 mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) pipes of 110 mm dia, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) junction single , (single T) equal or unequal of 110 mm dia complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) vent cowl, 110 mm dia complete all as specified and directed by Engineer-in-charge.

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping etc and like, including weathering, slightly rounded or chamfered angles and throating as directed with and includings necessary for work complete all as specified and directed by Engineer-in-charge.

M&L Cement concrete ( 1:2:4) type B-1 using 20mm graded stone aggregate as in surface channels & drains etc complete all as specified and directed by Engineer-in-charge.

Extra over for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including form, moulds, mitered/stopped ends etc complete all as specified and directed by Engineer-in-charge.

S & F reinforced concrete pipe class NP-2 ISI marked laid to slope in trenches jointed in CM 1:2 and tested complete with collars for 150mm dia pipe complete all as specified and directed by Engineer-in-charge.

M&L for PCC (1:2:4) type D-2 (using 40mm graded stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm bore pipe all as specified & directed by Engineer-in-charge.

M&L for Mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking ends binding with MS wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed by Engineer-in-charge.

M&L for Mild steel TMT bars 10mm dia & over as in handle of manhole cover, cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking ends binding with MS wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed by Engineer-in-charge.

M&L for Precast Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in cover slab (for manholes etc) and similar articles with plain faces, set in cement mortar (1:4) with and including necessary form work complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on brick or stone wall surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engineer-in-charge.

M&L for 15 mm thick, rendering in cement mortar (1:6) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated existing surfaces including cornices, plasterd or un plasterd surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying one coat of white wash on ceiling complete all as specified and directed by Engineer-in-charge.

M&L complete removal of existing treatment and applying two coats of putty for making uniform smooth surface complete all as specified and directed by Engineer-in-charge.

M&L for washing/rubbing down and stopping of destempered, plastered and painted surfaces of wall including cornices etc and making good of holes by filling holes in plastered surfaces with POP mixed with distemper and applying one coat of distemper oil emulsion complete all as specified and as directed by Eng-in-Charge.

M&L for complete removal of existing treatment & paints and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-charge.

M&L perparation of old existing wall surfaces including cornices, plastered or un-plastered surfaces by brooming down or steel wire brushing, moss efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M&L for non skid ceramic tiles exterior grade 300x300x10mm thick heavy duty (Endura from Johnson or equivalent) as in floor, set and jointed in neat slurry and pointed in coloured cemnt to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) all as specified and directed by Engineer-in-charge.

Taking down all loose plaster and concrete if any in RCC columns, Chajjas, beams,slabs or any other type of RCC members,removing all loose ruts/scale from reinforcement etc by using wire brushes ,sand paper or any other chemicals, applying a coat appoxy coating on old reinforcement, tying IRC fabric of size 75x75mm of 3mm dia and binding with mild steel wire annealed with exsting reinforcement and applying cement slurry uniformaly to exposed surfaces and gunniting using CM 1:3 avg thickness of gunniting not less then 30mm and finishing the surfaces with 10mm thick rendering in CM 1:4 finished even and smooth with out using extra cement and removing the debris from the site, complete all as specified and directed by Engineer-in-charge.

Taking down Chowkhats or frames exc. 1.5 sq. m but n.exc 4 sqm each with shutter (without taking off shutters from the frames) and removing to store complete all as specified and directed by Engineer-in-charge.

Taking down Chowkhats or frames with shutter (without taking off shutters from the frames)not exc. 1.5 sq. m each and removing to store complete all as specified and directed by Engineer-in-charge.

S&F 2nd class hardwood plain solid straight chowkat and frames wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joint complete all as specified and directed by Engineer-in-charge.

S&F 30 mm thick 2nd class hard wood glazed and skelton shutter for window, ventilator, etc. open rebated and prepared to receive glass gauze etc (divided into panels with shash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) ; supplied & fitted to chowkats complete all as specified and directed by Engineer-in-charge.

S&F factory made 2nd class hardwood plain framed, panelled shutter 35 mm thick with locking rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneered on both face. The size of rail and style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated 2nd class hard wood complete all as specified and directed by Engineer-in-charge.

S&F Butt hinges 100 mm size medium weight cold rolled mild steel and fixed complete all as specified and directed by Engineer-in-charge.

S&F Butt hinges 75 mm size medium weight cold rolled mild steel and fixed complete all as specified and directed by Engineer-in-charge.

M&L for Preparing of new wood surfaces and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aserture 1.40mm and fixed with stainless steel note both to steel window/ventilator and wire staple complete all as specified and directed by Engineer-in-charge.

S&F, 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes complete all as specified and directed by Engineer-in-charge.

S & F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-charge.

S & F in repair vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket etc complete all as specified and directed by Engineer-in-charge.

S & F in repair Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed complete all as specified and directed by Engineer-in-charge.

S & F in repair Bib tap cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia complete all as specified and directed by Engineer-in-charge.

S & F in repair 20mm stop cock cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends or for unions etc complete all as specified and directed by Engineer-in-charge.

S & F in repair 15 mm Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.

S & F in repair for pressure jet for western type water closet with PVC connection 600 t0 900 mm long including brass head screw and suitable washer complete all as specified and directed by Engineer-in-charge.

S&F in repairs Viteous China squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-charge.

S & F in repair PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets complete all as specified and directed by Engineer-in-charge.

S&F in repair European type water closet,including plastic seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engineer-in-charge.

S&F in repair CP Health faucet spray with 1.5m long pipe with wall hook & fixed in repair complete all as specified and directed by Engineer-in-charge.

S & F in repair Bib taps two way type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore and fixed.complete all as specified and directed by Engineer-in-charge.

Supply and in repair fix bathroom cabinet with mirror of size 305mm x 95mm x 410mm complete all as specified and directed by Engineer-in-charge.

S&F in repair CP Shower rose 125mm size with swivel joint including fixing sted pipe for union complete all as specified and directed by Engineer-in-charge.

S&F in repair gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repair Towel rail 600 mm long of CP brass fixed with and including chromium plated brass screw and wooden/plastic cleats (minimun weight 190 gms) complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC connection 450mm long and15 mm dia with brass fly nut at both ends complete all as specified and directed by Engineer-in-charge.

S&F in repair Vitreous china urinal, half stall type, complete incl providing and fixing plugs bedding urinal against wall in CM1:4 securing urinal to plug with and incl 60mm long brass screws ,pointing around urinal back in cement ,incl grating union for discharge pipe etc complete all as specified and directed by Engineer-in-charge.

S&F in repair looking mirror 600x450mm with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed by Engineer-in-charge.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed by Engineer-in-charge.

Dismantling water tanks or capacity exceeding 500 ltrs and not exceeding 1000 ltrs, complete all as specified and directed by Engineer-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-charge.

Taking down Aluminium anodised door, window and ventilator complete all as specified and directed by Engineer-in-charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) of any description, any thicknes including cover fillets and frame work etc, complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance complete all as specified and directed by Engineer-in-charge.

S & F Chequered cement concrete tiles 20cm X 20 cm X 25mm thk with grey cement and pigments, set jointed in neat cement slurry as in floors/path etc over and including 15mm thk screed bed in CM 1:4 including demolition of existing chequered tiles complete all as specified and directed by Engineer-in-charge.

M& L plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone ,copings, bed plates ,water through and the like including wethering, slightly rounded or chamfered angles and throating including use of form work (straight or curved ) set in CM 1:4 complete all as specified and directed by Engineer-in-charge.

Taking down carefully copper/ aluminium point wiring (light, fan socket or power) complete including PVC Casing Capping/conduit, fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc and making good disturbed surface of walls, floors etc to match with existing specification complete all as specified and directed by Engineer-in-charge. Note :- Unserviceable material obtained from taking down shall be issued under Schedule of credit.

Taking down the existing unserviceable main switch /cut out /DBs of any type/capacity/description as existing at site including MCBs any type and capacity making good the disturbed surface to match with the existing finishes complete all as specified & directed by Engineer-in-Charge.

Taking down the existing unserviceable sub main wiring of any type /description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified & directed by Engineer-in-Charge.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.6 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following:-

(a) One light point controlled by one switch.

(b) One exhuast fan point controlled by one switch.

(b) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(c) One socket outlet 6 amp controlled by one switch on indepdendent board.

M& L for Point wiring with 1100 volts grade PVC insulated FR multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.6 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting for one 16 amp socket outlet modular type for controlled by one switch on independent board complete all as specified & directed by Engineer-in-Charge. Note for item No. 151 & 152 :- Rate quoted shall be deemed to inclusive of cutting chasses and making good with existing specifications.

S&F switch piano flush button single pole one way 6 amp complete.

S&F switch piano flush button single pole one way 16 amp complete.

S&F socket outlet 2 in 1, 3 pin, 6 & 16 amp flush type complete.

S&F for socket outlet multipurpose having provision for 2 in 1 ,3 pin 6 amp piano flush type complete all as specified .

S&F ceiling rose 3 plates polycarbonate body complete.

Supply and fixing of building security light fitting LED 30 Watt IP 66 IK 07 pressure dia cast aluminium housing with high efficient LED as lihjting souce and PC cover having TOP opening sepreate drive compartment with fixing arrangement such as GI pipe bracket ,MS clamp ,Nut bolts etc and connecting as specified and directed .Make Havells cat pot No .EDDURAPEARLSL30WLED757SASYTOPCMP or equivalent as approved.

S& F in repair bracket of GI pipe medium grade of 40mm dia ,1.2 meter in length clamps made of FI 40 mm x 6mm incl nuts ,bolts & washers,painting complete as specified .

Supply and fixing of building security light fitting LED 35 watt IP65 with fixing arrangment such as GI pipe bracket 40 mm grade ,1.2 mtr long ,MS ,Clamp ,Nut Bolts etc and connecting as specified and directed . .Make : havells Cat No ENDURACITYLITEPLATPLATPLUSSL35WLED757SASYBOPC or equivalent Philips/Crompton.

S & F surface and wall mounted LED tube light along with fixture, 4 ft, 22W, extruded aluminium housing provided for efficient heat disspation with polycarbonate ,operating voltage 240 V, 50HZ, AC supply and operating tempureture 0 to 50 C ,power factor >0.9, lumen output > 2000 and provision of new 3 core multistanded copper conductor of size 23/0.193 from ceiling rose to fitting with white colour flexible pipe completion all as specified and directed

S & F surface and wall mounted LED tube light along with fixture, 2 ft, 10W, extruded aluminium housing provided for efficient heat disspation with polycarbonate ,operating voltage 240 V, 50HZ, AC supply and operating tempureture 0 to 50 C ,power factor >0.9, lumen output > 2000 and provision of new 3 core multistanded copper conductor of size 23/0.193 from ceiling rose to fitting with white colour flexible pipe completion all as specified and directed.

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground level connected to galvanized iron wire 4mm dia as earthing lead up to Panel /DB BOX as per site requirement by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection including test point terminal cover the earhing hole by PCC chamber and pcc cover and testing on completion complete all as specified and directed.

[i]. Excavation & earth work in any type of soil including removing of surplus material upto 100M [ii]. PCC (1:3:6) type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC (1:2:4) type B1 cover 50x50 cm with 8mm round bar @ 15 cm C/C both ways. [iii]. Main earthing strip from earth electrode to test point upto 7.5 mtr. [iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs and charcoal & salt as reqd. [v]. GI protection pipe of size 40 mm bore light grade 7.5m.

M& L earthing test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw.

S&F MCB distribution board SPN, 240 volts, 8 ways double door, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F double door MCB distribution board SPN, 240 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

Supply and fixing MCB's single pole and neutral 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve.complete all as specified & directed.

Supply and fixing MCB's single pole and neutral 40 to 63 Amps, 240 Volts,10 KA rapturing capacity 'C' curve.complete all as specified & directed.

Supply and fixing MCB's single pole 20 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified & directed by Engineer-in-charge.

S&F exhaust fan steel body AC single phase 230V of size 300 mm sweep with blades and frame and louvers in existing wall complete all as specified & directed by Engineer-in-charge.

M&L for single pole enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps, 240 Volts complete all as specified & directed by Engineer-in-charge.

M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 4.00 Sqmm (FRLS) in conduit concealed including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 4.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engr-In-Charge.(Note :- Two runsof 4.00 Sqmm cable & one run of 4.00 Sqmm cable shall be paid as one unit length)

Supply and lay pipe galvanized Mediam class including fitting 50 mm dia complete all as specified & directed by Engineer-in-charge.

Supply and lay pipe galvanized Mediam class including fitting 25 mm dia complete all as specified & directed by Engineer-in-charge.

S&F gun metel globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 50 mm bore sizes with ISI marked and as per IS 14846 all as specified and directed by the Engineer in Charge .

Supply and fix stop valve cast copper alloy screwed 25mm dia down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified & directed by Engineer-in-charge.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core including cable lugs complete complete all as specified & directed by Engineer-in-charge.

Cutting the existing 80mm pipe CI/GI and reducing to required length in position for insertion of new tees 80x80x50mm

M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as directed by Enginner-in-charge . Note :- Punned thickness of sand cushioning only measured for the purpose of payment.

Supply & laying 40 to 50 mm thick roughly hammer dressed Jodhpur stone patti cable cover 25 cm to 30cm wide and n.exc 60 cm long each laid dry abutting with each other with maximum gap between adjustment slabs n. exc 10 mm complete all as specifeid & directed by Enginner-in-charge .

M&L Point wiring used approved colour coding as per IS (Red, Black and Green) for single phase circuits), with multi-stranded copper conductor 1.5 sqmm nominal cross -sectional area, single core, PVC insulated and unsheated FRLS cable 1100 volts grade, ISI 694 marked with valid CML No. in and including medium grade, PVC concealed conduit, ISI marked of dia not less than 20 mm and conduit accessories conceled in wall/roof/floor etc, ISI marked with valid CML No. (IS-9537 - 1983 for conduits and IS : 3419 - 1976 for conduit accessories) with terminated to suitable for mounting modular type switches, socket fan regulator etc PVC insulated multistanded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- Note : Modular switch and socket shall be measured and paid separately.

(a) One light point controlled by one switch.

(b) One Ceiling /Exhaust fan point controlled by one switch.

(c) One 2/3 pin socket outlet 6 amp controlled by one switch on the same board with other switches.

(d) One 2/3 pin socket outlet 6 amp controlled by one switch on indepdendent board.

All as per item No 181.00 above but point wiring with 4.00 sqmm single core multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 volts grade and 4.00 Sqmm PVC insulated and unsheated (FRLS) cable 1100 volts grade with multi stranded copper conductor as earth wire for 15/16 Amps multi porpose socket combination point on independent board.Note : Modular switch and socket shall be measured and paid separately.

S&F modular switch one way 6A, 1 module complete all as specified & directed by Engineer-in-Charge.

S&F modular socket 6A-2/3 pin combined 2 module complete all as specified & directed by Engineer-in-Charge.

S&F modular switch socket combined 6A/16A, 6 pin, 3 module complete all as specified & directed by Engineer-in-Charge.

S&F step type modular fan regulator 120W -2 module ISI Marked with valid CML No complete all as speified and as directed.

S& F finished mounting Modular Metal Flush/Sunken Box of suitable size of following Sizes:-

(a) 1 Module

(b) 2 Module

(c ) 3 Modules

(d) 4 Modules

(e) 6 Modules

(f) 8 Modules

(g) 12 Modules

S&F Modular white cover plate with frame innner and outer plates for following sizes:-

(a) 1 Module

(b) 2 Module

(c ) 3 Modules

(d) 4 Modules

(e) 6 Modules

(f) 8 Modules

(g) 12 Modules

S&F vertical DBs TPN 4 way 415 V double door powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 250 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required,suitable for TP/FP MCCB as incomer with MCCB 160A , and with SP/TP MCCB's as outgoing MCCB FP 160A, 25 KA complete all as specified & directed by Engineer-in-Charge.

Supply and fixing of recessed mounted down lighter with extruded aluminium frame with high bright LED,idealy suited for low ceiling areas Brilliance 36watt LED 2700/4300 6000K, ceiling cutout 2ft x 2ft complete all as specified & directed by Engineer-in-Charge.

S & F in repair of LED tube light fitting 10 watt tube LED Neutral white in colour, 600 mm in length wall mounted LED batten,extruded aluminium heat shink provided for efficient heat dissipation & integrated electronic driver,optic diffused type ENDURA LINER NEO including all electric connection with whilte flexible cord 1.50 Sqmm 3 core as required complete all as specified & directed by Engineer-in-Charge.

Supply and fixing 415 V 10 KA 'C' curve miniature circuit breker (MCB) of TPN 63 to 100 Amps four pole and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified & directed by Engineer-in-Charge.

Taking down ceiling fan/Exhaust fan of any sweep with cable, dismantling of blades and apply painting to ceiling fan complete in situ with synthetic enamel paint by mechanical spraying machine including filling cavity with filler one coat after cleaning all dust etc refixing ceiling/ exhaust fan after servicing grasing change of bearing if reqd, including making serviceable and noise free in all respect and connecting up including provn of cable from ceiling rose or connector to fan complete all as specified & directed by Engineer-in-Charge.

S&F PVC insulated copper conductor 2.5 sq mm 3 Core drawn through and including PVC conduit medium grade with necessary fixing arrengements and connecting items complete all as specified and directed by Engineer-in charge.

S&F in repair modular type box having 20 Amp MCB SP as incomerfor Gyser/AC complete all as specified including taking down existing once complete .

Supply and fixing of building security light fitting LED 35/36 Watt IP 65, pressure die cast aluminium housing with high efficient LED as lighting souce and PC cover having TOP opening sepreate drive compartment etc and connecting as specified and directed.

S&F wall mounted fan AC single phase 230V of size 450mm sweep with blades and frame and louvers.Make Havells Model Name :Airboll Hi Speed or Almonard/Khaitan

S&F for LED post top lantern/gate Light 35 watt light fitting made of cast aluminium spigot housing with decorative opal acrylic diffuser with IP 65 protection complete with all accessories including removal of old unserviceable complete all as specified and directed by Engineer-in-charge. Make-Havells Cat part No CORALPT35WLED 830PSYMTOPC or as equivalent from list of makes.

S&F Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 10 watts LED with necessary MS base box made out of MS sheet of 2 mm thick of suitable size abbended in PCC 1:2:4 base, electrical connections with adequate size including removal of old unserviceable one complete all as specified and directed by Engineer-in-charge. Make:Havells Cat part No Havells MOUNTBL10WLED830PSYMTOPMMA (0.6 M) or as equivalent from list of makes.

S&F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar IP-43 protection 415 volts double door with magnetic locking system complete all as specified and directed by Engineer-in-charge.

M& L for submain wiring with approved colour code /as per IS (Red, black & Green for single phase ) circuit with two single core PVC insulated cable with multistandered copper conductor are of 6.00 Sqmm (FRLS) in suitable concealed condit size not less than 20 mm dia incluuding one run of PVC insulated multistranded copper conductor nominal cross sectional area of 6.00 Sqmm (FRLS) of continuous earth wire green in colour complete all as specified & directed by Engineer-in-Charge. (Note :- (i) Two run of 6.00 sqmm cable & one run of 6.00 Sqmm cable as earth wire and one run of PVC Conduit shall be measured & paid as one unit length.) (ii) Rate quoted by contractor deemed to be inclusive of cutting chasses and making good with existing specification.

M& L for submain wiring with approved colour code /as per IS (Red, black & Green for single phase ) circuit with two single core PVC insulated cable with multistandered copper conductor are of 10.00 Sqmm (FRLS) in suitable concealed condit size not less than 20 mm dia incluuding one run of PVC insulated multistranded copper conductor nominal cross sectional area of 10.00 Sqmm (FRLS) of continuous earth wire green in colour complete all as specified & directed by Engineer-in-Charge. (Note :- (i) Two run of 10.00 sqmm cable & one run of 10.00 Sqmm cable as earth wire and one run of PVC Conduit shall be measured & paid as one unit length.) (ii) Rate quoted by contractor deemed to be inclusive of cutting chasses and making good with existing specification.

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground levl connected to galvanized Strip 32X6mm dia as earthing lead up to Panel /DB BOX as per site requirement by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection including test point terminal cover the earhing hole by PCC chamber and PCC cover and testing on completion complete and including taking out old earthing all as specified & directed by Engineer-in-Charge.

[i]. Excavation & earth work in any type of soil including removing of surplus material upto 100M [ii]. PCC (1:3:6) type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC (1:2:4) type B1 cover 50x50 cm with 8mm round bar @ 15 cm C/C both ways. [iii]. Main earthing strip from earth electrode to test point upto 7.5 mtr. [iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs and charcoal & salt as reqd. [v]. GI protection pipe of size 40 mm bore light grade 7.5m.

S&F in repair earthing test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw.

GEMRARAMCONTRACTOR

Leelashah Enterprises

Dadhich Engineers

M/s Shri Inder Construction Company

BHAGWATI CONSTRUCTION