Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.8 LAccepted-AOC 26M NEEM SARAI DHOOMANGANJ PRAYAGRAJ 211011 | PRAYAGRAJ | UTTAR PRADESH | 211011 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹17.9 L+₹1.1 L (6.83%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹18.1 L+₹1.3 L (7.49%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹18.9 L+₹2.1 L (12.5%)Rejected-Finance | L4 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹16.5 L
EMD Value
₹33,000
Closing Date
1 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BKT
GE (AF) BKT, LUCKNOW
PROVN OF CERTAIN MINOR WORKS (PHASE-II) AND REVENUE WORK AT AF STN BKT
2022_MES_548288_2
8644/BKT/E8
Open Tender
Civil Works
Item Rate
120 days
GE (AF) BKT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE (AF) BKT
₹33,000
Yes
22 Nov 2022
10 Sept 2022
3 Oct 2022
10 Sept 2022
1 Oct 2022
19 Sept 2022
Amount
Excavation in trenches n.exc 1.50m wide and n.exc 1.5m deep for foundation etc. for shafts, wells cesspits manholes etc n exc 10 sqm on plan and n exc 1.5 m depth. in soft/loose soil and getting out all as specified and directed.
Returning , filling in, including spreading levelling , watering well, ramming in layers n. exc 25 cm in soft/loose soil all as specified and directed.
Removal of excavated material such as soils to a lead n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.
M&L plain for cement concrete 1:4:8 type D2 (40mm graded aggregate) in foundations, filling & mass concrete all as specified and directed.
M&L for flyash brick work using old size brick, straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement Mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over & including a coat of alkali resistant priming paint in comouflage pattern of thee or more colors as approved by GE complete all as specified and directed.
M&L for two coats of white wash on newly plastered surfaces of ceiling including ncessary preparation complete all as specified and directed
M&L for preparation of old wooden or wood based surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed..
Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L 10 mm thick Coloured Vitrified Ceramic tiles (square/ rectangular) light shade area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
M&L 10 mm thick Coloured Vitrified Ceramic tiles (square/ rectangular) area of each tiles not exceeding 0.36 sqm in wall skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15mm thick screed bed in CM 1:6 complete all as Specified and directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white complete all as specified and directed
S&F in repair plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and direccted
Taking down existing PVC low level flushing cistern including bend, flush pipes etc and S & F 10 Ltrs capacity PVC low level flushing cistern including chromium plated brass inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length incl making necessary connections to water supply pipe line jointing to WC all as specified and directed.
S&F in repairs vitreous china wash basin, white flat back size 550x400 mm including waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand but excluding taps, chain and plug complete all as specified and directed
S&F in repairs pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe, 15mm bore fancy type complete all as specified and directed
S&F in repair PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed
S&F PTMT square grating with side hole 150mm size for trap in repairs complete all as directed.
S&F tubular towel rail 20mm dia D type and 60cm long including brackets fancy type brass chromium plated complete all as directed.
Supply and fix Soap dish, vitreous china white approximate size 160x160x90mm and fixed in position complete
Demolition of cement concrete (unreinforced) n exc 15 cm depth below or above ground level complete all as specified and directed
M&L for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection including necessary form work and surface even and smooth w/o using extra cement including bitumen joints complete all as specified.
M&L 50mm thick PCC type B-1 1:2:4 (using 20mm graded stone aggregate) complete all as Specified and directed.
S&F 15mm dia Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair complete all as Specified and directed.
S&F 15mm dia stop valves, fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions and fixed in repair complete all as Specified and directed.
M&L plain cement concrete 1:2:4 type B-O (12.5 mm graded stone aggregate) as in cills, steps; coping seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings copings, kneelers, apex stones, bed plates complete all as specified and directed.
Taking down Chowkhats or frames with shutter (without taking off shutters from the frame) not exc. 1.5 Sqm each complete all as directed.
Taking down old shutters of any description not exc. 1.00 Sqm each complete all as directed.
S&F 35mm thick factory made 2 nd class hard wood rail & style plain, framed panelled shutters with lock rail & panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veenering on both faces, size of rail and stile as per IS:1003(Part-I) kiln seasoned and chemically pressure treated complete all as directed.
S&F butt hinge 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.
S& F aluminium handles fabricated type anodised 150mm size complete all as specified and directed
S&F for mild steel barrel tower bolt stove enamelled black with bright bolt 150mm long complete all as directed
S&F for mild steel sliding door bolt 150 mm long ,plate type, stove enammeled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate & two staple plate complete all as directed.
M&L 5 mm thick ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and directed.
Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge
Supply and fixing factory made uPVC white colour door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc, profile of frame & sash shall be mitred out & fusion welded at cormer, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware & drainage of water etc, & after fixing from the gap between frame & adjacent finished wall shall be filled with wrather proof silicon sealent over backer rod of required size & of approved quality complete all as specified & directed. (Glass shall be paid separately)
S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work drilling and fixing complete conforming to Fe 410-0 all as specified.
M&L for preparation of newly steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.
M&L preparation of newly plastered surface of wall and apply two coats cement base paint on new plastered surfaces of wall, white or tinted complete all as specified.
Surface excavation in soft/loose soil n exc 30cm deep and averaging 15cm deep and getting out complete all as directed.
M&L hardcore of broken bricks of gauge n exc 63mm, deposited , spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified and directed.
M&L PCC 1:4:8 type D-2 (40 mm graded stone aggregate) in foundation sub base all as specified and as directed.
M& L 100mm thick PCC B2, 1:2:4 (40 mm graded stone agg as in flooring finished even and smooth without extra cement all as specified
M & L for Forming 12mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade 'A' complete all as specified and directed.
Removing excavated surplus soil to a distance exc 50 m & up to 250 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed.
Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittings etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.
Taking down fans/meter/Geyser/Exhaust fan from existing position and removing the same after completion of work complete all as directed.
Taking down old and unserviceable sub main wiring any size/type /core incl earth wire complete with batten conduit etc all as soecified and directed.
Taking down old and unsv sheet metal enclousure ,switch fuse unit,distribution board any type/way/capacity including fuses mcbs ,insulator rccbs etc copmlete after removing all connection and amking good the disturbed surface all as directed by Engr-in-charge.
M&L for point wiring with two single core PVC insulated & PVC unsheathed multi stranded FRLS copper conductor cable of size 1.5 Sqmm 1100 volts grade in and including making good the distrubed surfaces of wall with colour washing/ distemparing the surface to match the existing including concealed conduit of size 20 to 25 mm with all accessories and one single core PVC insulated & PVC sheathed multi stranded copper cable of size 1.5 Sqmm 1100 Volts grade as earth continuity conductor connected to common earth dolly, switch board complete with MS rectangular type box heavy duty for mounting the switch socket etc complete as specified for One light/Fan point controlled by one 5 Amps 240V, SP switch one way complete. Make of Cable :- Havells/ Plaza/Finolex/Polycab. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex
Ditto all as item No 60 but one 3 pin 5 amps switch socket outlet point on independent board
Ditto all as item No 60 but one 3 pin 5 amps socket point on same board
Ditto all as item No 60 but herein before but with 2.5 sqmm copper conductor multi stranded for 5 pin 15 Amps switch socket outlet.
S&F switch piano, flush type single pole, one way 5 Amps.
S&F switch socket outlet 2 in 1, 5 pin, 5 Amps flush type
S&F switch socket outlet 2 in 1, 5 pin, 15 Amps flush type
S&F socket outlet 5 Amps flush type
M&Lceiling rose,PVC/polycarbonate, isolated body
S&F Submain wiring with two single core PVC insulated FRLS multistrand copper conductor cable of size 6 Sq mm drawn into and including non metallic heavy duty rigid concealed PVC condute not less than 25 mm size ISI marked ivory colour (Pressfit or similar brand ) with all fittings / accessories and one 06 Sq mm FRLS multistrand copper conductor cable as continuous earth wire complete. (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate quoted for this items.)
S&F sheet metal enclosure double door (MCB DB) three phase and neutral with 200 Amps rated bus bar TPN, 4 way horizontal type, with provision of MCB incommer, AC, 415 Volt complete all as specified & directed.Make :- Havells / Legrand / GE / Seimens/L&T
S&F MCB Four Pole 40 to 63 Amps 415 Volts, 50 Hz, 10 KA breaking capacity complete all as directed.Make :- Havells / Legrand / GE / Seimens/L&T
S&F MCB single pole, 40 to 63 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make :- Havells / Legrand / GE / Seimens/L&T
S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make :- Havells / Legrand / GE / Seimens/L&T
S&F Sheet metal enclosure, powder coated single pole and neutral with two pin and earth plug and socket (Mettalic) complete with one single pole MCB for 240 volts 20 Amps rating rupturning capacity 10 KA complete fixed as in repairs complete all as specified and directed by Engineer-in-Charge Make Havells/MDS/Legrand/L&T
Supply and fix LED light fittings 1x20 watt ,220 voltAC decorative end cap type with driver holder including 20 watt LED tube light connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rse complete .
Supply and fixing LED security light 35 watt complete with security light bracket (complete with two set of clamp ,nut and bolt) made out of 40 mm medium grade GI pipe bend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtrs) and making conection with using 1.5 sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed.
Supply and install and testing hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quailty using Non CFC refrigerant Gas with minimum 3 star rating and EER 3.2 of capacity 1.5 TR including outdoor unit consisting of compressor, condensor coil, candensor fan with motor and indoor unit consisting of blower, fan motor , PCB for better air flow complete all as specified and approved by EIC. Make: LG / Carrier / Samsung/Hitachi Note :- (i). Cutting holes in walls/window of any thickness for installation of AC etc, connection and making good the disturbed surface to match with the existing surface after work shall be done and rate is included in above rate . (ii) Electrical cable required to connect outdoor unit wih indore unit and indore unit to voltage stabilizer inclusive in above rate. (iii) copper piping/drain piping is included in above rate. (iv) Iron stand for fixing out door unit in wall or rooftop is included above rate. .
Supply & Fix wall mounted digital display voltage stabilizer copper winding, for automatic voltage correction single phase, naturally air cooled, indoor type, designed for input voltage between 140 Volt to 280 Volts and out put voltage 230Volt and High / low voltage cut off with facility of including instant start & time delay relay of 3 minute capacity 4KVA. Make : Blue Bird/ V guard/Microtek
M&L for rewinding of exhaust fan of size 300 mm sweep with super enamelled copper winding wire of appropriate gauge for any make or model,reassembling and testing including taking down cleaning and replacement of split pin rubber reel, clamp, check nuts, flexible cord of size 3 core of suitable size complete and refixing the same after repair all as directed
Supply & Fix 01 HP capacity portable water transfer tullu pump for lifting of water at 6 mtr head including suction and discharge pipe with foot valve etc inclding complete accessories and mounting facility to a certain height with clamps all as directed
Earthing complete with galvanised steel earth plate electrode 60cm x 60cmx6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work, complete.
M/S A M ENTERPRISES
FRIENDS N FRIENDS
M/s R K Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .