MTPS I Civil Circle - Painting with two coats of Epoxy coal tar over one coat of epoxy primer to the existing Steel Structures and other allied civil works in the Air washer room of Unit I and III and AHU Unit I of Power House Building at MTPS I

Amount

Removing the loose particles from the damaged roof slab (Rcc) by chipping with tool and scrapping with wire brush, cleaning and washing thoroughly with water and plastering the surface neatly with CM 1:3/20mm thick after observing the following i.e. applying construction chemicals. 1. Applying Nitozinc primer to the exposed rods. 2. Applying bonding agent i.e. Nit bond EP to the exposed old concrete. 3. Renderoc RG as micro concrete. 4. Slurry primer using Nitobond SBR. The above work is including labour charges working with all safety equipment , cost of all chemicals /materials ,charges for safety appliances, all lead, lift , conveyances of materials etc., in complete.

Providing two legged scaffolding using 15cm diameter of casuarina posts of 4m overall length from (3m height + 0.5m projection + 0.5m in the ground). The distance between the two rows being 1.25m and the facing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and distance at 2m C/C middle braces to setup and providing a platform with country wood plants of 40mm thick in a complete form using coir or nails, cost of all materials, all lead & lift, all labour charges safety appliances etc., complete.

Providing temporary supports using pipe jack &channels at the bottom of roof slab to carryout structural replacement works including cost of materials, labour charges dismantling charges on completion of work, T&P charges, safety equipment, cost of all consumables transport charges, all lead, lift etc complete.

Painting (Airless painting)of steel structures in the Air washer system Stage II (Unit III) of Power House Building with one coat of protective coating of self- priming Epoxy primer (DFT 100+10% Microns) and two coats of Epoxy HB Coal tar paint(DFT 125+10% Microns per coat) using different shades as per the direction and satisfaction of the Engineer and including the cost of all materials, scaffolding, T&p`s, labour lead, lift and safety appliances, etc, complete.

Painting two coats with enamel paint of standard approved quality & colour including one coat of red oxide primer including cost of all materials, brushes, all lead & lift, all labour charges , all safety appliances etc., and as directed by the engineer at site in complete.

Supplying fabricating and placing in position of M.S plain sheeted (18G) door of required size using M.S Angle 35x35x5mm for outer frame, 25x25x5mm for shutter frame and bracing M.S sheet including cost of all materials, labour charges, lead, lift, etc., complete.

M.R.VAISHALINI ENTERPRISE

GOPIKA CONSTRUCTION AND CONTRACTORS