Marakkanam Town Panchayat - CGF -24-25- Kattaiyan Street OHT

Amount

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B

Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - (Footing 1.5m below GL)

Column Below Ground Level

Column 0mt to Tie Beam + 4.00m level

Column above 4.00mt to Tie Beam + 8.00m level

Column above 8.00mt to Tie Beam + 12.00m level

Column above 12.00mt level to below the slab bottom

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. PLANE SURFACES (Below GL (0 to 3.30m)

RCC Tie Beam at 4.00m level

RCC Tie Beam at 8.00m level

RCC Tie Beam at 12.00m level

Curved Surface (OHT above 15.13 mt)

Square column (Below G.L)

Ground level to 4.00 m

Above 4.00m to 5.00m level ht

Above 5.00m to 6.00m level ht

Above 6.00m to 7.00m level ht

Above 7.00m to 8.00m level ht

Above 8.00m to 9.00m level ht

Above 9.00m to 10.00m level ht

Above 10.00m to 11.00m level ht

Above 11.00m to 12.00m level ht

Above 12.00m to 13.00m level ht

Above 13.00m to 14.00m level ht

Above 14.00m to 15.00m level ht

Above 15.00m to 15.20m level ht

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Providing and fixing of Reinforced cement concrete 1:1.5:3 mix special stair-case of approved design outside of the tank as generally shown in plan including cost of cement,shuttering,strutting,moulding,lifting,casting and painting etc.

Providing and fixing of cut stone (Rough dressed) set in CM 1:3 of required size at site including cost of all materials, labour charges, curing etc., complete and as directed by TWAD Board Officers. (Size 0.30 x 0.30 x 0.15 m)

Supply, Delivery and fixing of CI Manhole frame with cover of following size including cost of all materials, fixing of MS clamps, Bolt and nuts etc.,complete and as directed by TWAD Board Officers. 0.60 x 0.60 (Heavy Duty)

Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Providing GI pipe connection arrangements for inlet, outlet scour and overflow etc. including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality ename (65mm Ø GI pipes for inlet 1xl connection)

65mm Ø GI pipes for over flow

50mm Ø GI pipes for scour pipe 1xl

65mm Ø GI pipe for delivery 1x1 pipe

90mm Ø PVC Threaded coupler

75 mm Ø PVC threaded coupler

65mm Ø GI Tee

65mm Ø GI 90 Bend

65mm Ø GI coupler

65mm Ø GI union

65mm Ø GI Elbow

65x50mm Ø GI Reducer

75mmx 63mm PVC Reducer

75mm PVC Threaded coupler

75x90 PVC Reducer

75x63 PVC Reducer

65mm Ø GM Gate valve

50mm Ø GM gate valve

Providing and fixing of RCC inside access ladder in RCC 1:1.5:3 (One cement, one and half sand and three aggregates) using 20mm HBG stone including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc.

Supply, delivery and fixing of enameled water level indicator of approved design and pattern (graduation in metric system) with required all accessories as directed by TWAD Board Officers. ( The rates including loading, unloading, transportation charges etc.,)

PKP Construction (BID ID -1190926)