Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹90,000Accepted-Finance | 1 | Accepted-Finance The bidder has fulfilled the prerequisite formalities and stands qualified | |
| 2 | 2₹92,200+₹2,200 (2.44%)Accepted-Finance | 2 | Accepted-Finance The bidder has fulfilled the prerequisite formalities and stands qualified |
Tender Value
₹77,000
EMD Value
₹1,540
Closing Date
30 Dec 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer PHE Mech. Div. South Awantipora
Executive Engineer PHE Mech. Div. South Awantipora
Providing, Fitting, Testing and Commissioning of Horizontal Open Well Submersible Pumping Unit at WSS Kurigam under Capex UT.
2022_PHE_199089_1
JSD/PHE/MDSA/ e-NIT No. 77
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
30 days
Kurigam
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
Yes
Executive Engineer PHE Mech. Div. South Awantipora
₹1,540
Yes
3 Jan 2023
9 Dec 2022
31 Dec 2022
9 Dec 2022
30 Dec 2022
9 Dec 2022
Amount
Supply, Installation, Testing & Commissioning of 03 phase Horizontal Open Well Submersible Pumping Equipment with following specifications: - A. PUMP: - Discharge = 410 LPM Head = 12 Mtr. Speed = 2900 Rpm Type of pump = Mixed flow Impeller = High Tensile Brass conforming to IS 304:1981/Leaded Tin Bronze LTB2 of IS 318:1981/ Cast Iron FG 200 of IS 210 Quality of Water to be handle= Ground Water B. MOTOR: - Rating = Not less than 2.00 HP Method of starting = Star – Delta/Soft start Speed = 3000 (Syn). Voltage = 415 + 15 % Class of insulation = Suitable for above rating. The horizontal Open Well submersible motor shall be squirrel cage induction motor and the windings shall be wet type. The motor shall be suitable for operation on voltage and frequency conforming to IS: 585 – 1962 (with latest amendments). The motor shall have protection by means of cable glands, rubber seals etc. from ingress of bore well water, sand and other foreign material. The thrust bearing housing shall be provided with a drain plug to empty the oil / pure water filled into the thrust bearing housing / motor. The motor shall be made of corrosion resisting materials to resist corrosion under normal conditions and the motor shall have a name plate giving following information: - a) Induction motor b). Name of manufacturer c) Manufactures number and frame d) Type of duty e) Frequency in Hz. f) Number of phases g) Rated output in KW/HP h) Rated voltage and including connections. i) Approximate current in Ampere at rated output. j) Speed in revolutions per minute at rated output etc. The pumping unit shall also be provided with accessories / attachments viz. Requisite dia. G.I. Nipple one side flanged and other side threaded, Double submersible cable of requisite gauge as connection leads. The Job also includes Providing/Fitting of nuts, bolts lowering of unit in to Dug well. The job also includes P/F of 6mm² Submersible cable -30 mtrs from panel board to lowering of pumping unit in the Dug well then proper testing and commissioning of pumping unit on full load at site. Note: - The test/manfacturers certificate of submersible pumping equipment as per relevant IS be furnished at the time of submission of the product Invoice / payment claims No payment shall be made without the submission of the quality assurance / test certificates.
Contol Valves (Sluice Valves) Providing, Fitting of 50 mm, PN- 10 Ductile Iron double flanged, soft seated glandless gate/ sluice valve. Body and bonnent of ductile cast iron, wedge with fully vulcanized EPDM rubber(Approved for drinking water) and NBR seal. Gate /Sluice valve shall be compatible for buried application and shall be safe to install in both horizontal and vertical positions It shall have electrostatic epoxy coating inside and outside approved for drinking water the valve shall be supplied along with hand wheel. The job includes providing and fitting of 02 No. M.S Flanges perfectly adaptable to the inbuilt flanges of the valve, which shall be fitted with delivery mains of the pumping unit. Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
Fabrication and fitting of delivery flanged piping arrangement fabricated out of 50 mm dia. GI pipe Class-B (25 mtr) P/F of Flanged Tee (1nos) & GI Bend -01no made- out of 50 mm dia. G.I. pipe class “B” as per specifications mentioned above. The flange thickness shall be 12 mm and as per IS – 6392. Job includes P/F of M16 flange bolts / nuts chrome plated for connecting the pumping unit with the delivery Manifold.
Rayees Electric Engineering Works
tech_eval.pdf
fin_eval.pdf
finance_530736.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .