PROVISION OF CHANGING ROOM NEAR T 61 T 62 ADDITIONAL TOILETS TO MDC REPAIRS TO ROOF JOINERIES IN BLDG NO P 356 OF PAO ORs SPECIAL REPAIRS TO HARD STANDING BLDG NO P87 P88 AND CERTAIN E M MINOR WORKS UNDER GE NORTH BANGALORE

Amount

B/R WORKS

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavating in trenches, n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick in hard/dense soil complete all as specified and as directed.

Removing excavated material(soil) to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the staring point complete all as specified and as directed.

Hardcore of gauge n.exc. 63mm, with broken stone or boulders, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Plain Cement Concrete as in foundation filling and mass concrete (1:4:8), type D-2, using 40 mm graded stone aggregate complete all as specified and as directed.

Precast cement concrete block masonry with solid blocks PCC (1:3:6), type C1 exc. 10cm in width and setting in CM(1:4) complete all as specified and as directed.

Plain Cement Concrete, (1:2:4), type B 1, using 20mm graded stone aggregate as in copings / hold fast, filling of pressed steel frame including necessary form work complete all as specified and as directed.

15mm thick rendering on brick or concrete surface in cement mortar (1:6) and finishing the surface with even and smooth without using extra cement complete all as specified and directed.

Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with water proofing compound as per manufacturers instructions finishing the surfaces even and smooth without using extra cement including necessary scaffolding complete all as specified and directed. NOTE:- WPC will be measured and paid separately under relevant items.

Supply only integral liquide water proofing compound all as specified and as directed.

Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces, cleats etc) of 410-W (Gde-E-250) and painted with one shop coat of zinc chromate primer paint including preparation of surfaces at contractor's workshop before fabrication complete all as specified and directed.

Rolled mild steel work as in hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc, wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specifed and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tenisile strenth of 550 Mpa as in roof covering cladding to wall, pre fixed with self taping screwes as specified and as directed.

Rolled mild steel framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete including painted with one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop / factory before fabrication complete all as specified and as directed.

Plain Cement Concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base to floors, 75mm thick complete all as specified and as directed.

Machine cut Kota stone slab flooring 18-20mm thick, mirror polished hemogeneous colour laid over and including 20mm thick screed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Machine cut Kota stone slab 18-20mm thick in skirting / risers, mirror polished hemogeneous colour fixed over and including 10mm thick rendering in CM(1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Marble work of 'Makrana White' 18 to 20mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms, borders in Kota stone flooring and like fixed over and including cement screed of 20mm thick in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified and as directed.

Plain Cement Concrete type C-1, (1:3:6) using 20 mm graded crushed stone aggregate, 75mm thick as in plinth protection, laid in alternate bays (not exceeding 2 sqm each) finished the concrete surfaces even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as specified and as directed.

Chequerred cement concrete tiles 300x300x25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigments to match the colour of tiles over and including 20mm thick screed bed in CM (1:4) complete all as specified and directed.

Preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel over a coat of red oxide primer, complete all as specified and as directed.

Preparation of new or previously untreated plastered surfaces of any description and applying two coats of oil bound distemper over a coat of alkali resistant primer over two coats of wall care putty finished to smooth surfaces complete all as specified and directed.

Preparation of new or previously un treated plastered wall surfaces of any description and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint (Apex Ultima or equivalent brand as specified in CA) over a coat of weather proof primer including filling the cracks etc with crack filling material all as per manufacturers instructions complete all as specified and as directed.

Rotational moulded polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 2000 ltrs capacity fixed in repairs complete all as specified and as directed.

20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs (Min weight 20mm-210 gms) all as specified and as directed.

Gun metal gate or globe valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Stainless steel kitchen sink made out of stainless steel 1mm thick with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets or fixing in granite slab and connecting union to pipe overall size 495mm x 420mm, bowl size 410mmx 330mm x 160mm including PVC waste pipe 32/40 mm dia and 1200 mm long complete all as specified and as directed.

Machine cut Granite stone slab 18-20mm thick, black colured, with edge rounded one side laid over 15mm thick cement mortar 1:4 screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Hydraulically regulated door closer, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium die cast body fixed in repairs complete all as specified and as directed.

Reinforced cement concrete, M-25(Design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Reinforced cement concrete, M-25(Design mix) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

Reinforced cement concrete, M-25(Design mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work vertical or to batter etc with rough finished flat concrete surfaces complete all as specified and as directed.

Steel formwork to sides of pillars, posts, struts, piers, columns and stanchions etc with rough finished flat concrete surfaces complete all as specified and as directed.

TMT steel bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

TMT steel bars 8mm dia, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

TMT steel bars 6mm to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups all as specified and as directed.

Plain Cement Concrete,(1:2:4), type B0, 25mm thick as in damp proof course using with and including supply of approved integral liquid water proofing compound as per manufacturers instructions complete all as specified and as directed.

Precast Plain Cement Concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type B1 (1:2:4), using(20mm graded stone aggregate complete, as in walls in width and setting in cement mortar (1:6) complete all as specified and as directed.

Moorum/red bajri filling as in floors or pavings, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Plain Cement Concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base to floors, 100mm thick complete all as specified and as directed.

Non skid ceramic coloured printed tiles 7 to 8mm thick(square/ rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11sqm, as in floors, set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over 20 mm thick cement screed in cement motor (1:4) all as specified and as directed.

Glazed ceramic coloured tiles 300 x450 x 7 to 8 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:4) all as specified and as directed.

Rendering 5 mm thick on surface of brick work / concrete surfaces in CM (1:3), surfaces finished even and smooth without using extra cement on ceiling complete all as specified and as directed.

Preparation of new or previously un treated plastered wall surfaces of any description and applying two coats of cement base paint over a coat of alakli resistant primer complete all as specified and directed.

Preparation of newly plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified and directed.

Preparation of newly plastered wall surfaces of any description and applying three coats of white wash complete all as specified and as directed.

Factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixed to wall all as specified and as directed.

Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with wood free EPS and 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification and drawings.

PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and as directed.

PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and as directed.

PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and as directed.

Vitreous china wash down water closet pan (pedestal pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete of CERA model Cat part No. 2008 including plastic EWC seat cover, coloured closed pattern with flat bottom and cover of CERA model Cat part No. 2308 and mild steel chromium plated or aluminised hinging device and PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity including brackets as per Prayag Cat No. 502 or equivalent, PVC connection 15mm dia & Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia complete all as specified and directed.

Vitreous china wash hand basin white flat back of size 550x400mm excl chain and plug and porcelain stopper but incl CI bracket. waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe 75 cm long and 15mm dia PVC connection complete all as specified and as directed.

Vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including supply and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed.

75 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to walls / floors including PVC clamps and necessary fittings complete all as specified and as directed.

110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to walls / floors, laid in trenches including PVC clamps and necessary fittings complete all as specified and as directed.

110 mm bore PVC (SWR) junction single (single T), type 'B' equal or unequal complete all as specified and as directed.

PVC (SWR) vent cowl of bore 110 mm dia all as specified and as directed.

Precast Reinforced Cement Concrete (1:2:4), type B1, using 20mm graded stone aggregate as in cover slabs of man holes, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles set in CM (1:4) complete all as specified and as directed.

10mm thick rendering on brick or concrete surface in cement mortar (1:6) and finishing the surface with even and smooth without using extra cement complete all as specified and directed.

Aluminium alloy, anodised sliding door bolt 300 mm long with hasp and staple (bolt type) and fixing clip of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy and fixed complete all as specified and directed.

Mild steel ventilators with top hung shutter(half fixed) including hinges, steel peg stay, complete with glazing bars and 10 x 10 mm square guard bars in equal spacing, devotailed or welded including one coat of red oxide primer all as specified and directed. NOTE :- PCC in frame, glass pane & wire mesh to be paid separately under relevant items.

Soap dish fancy type of PTMT complete all as specified and as directed.

Vitreous China squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rests including PVC (SWR) P trap connecting to flush pipe and to anti syphonage pipe, PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets, etc. complete including making good to floor fixed complete all as specified and directed.

25mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, fixed to wall, ceiling or laid in floors complete all as specified and as directed.

20mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, fixed to wall, ceiling or laid in floors complete all as specified and as directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including jointing to waste pipe fixed in cement concrete type complete all as specified and as directed.

PVC (SWR) multi floor trap 75mm dia type 'B' with grating including joint with solvent cement complete all as specified and directed.

Bib taps standard of PTMT, any colour screwed for iron pipe suitable for 15mm dia fixed all as directed.

Stop cocks standard of PTMT, any colour screwed for iron pipe suitable for 15mm dia fixed all as directed.

Overhead shower PTMT 100mm dia with arms, 225mm long, all as per (Prayag Cat No 1814-C or techno commercially equivalent makes specified in PS, complete all as specified and as directed.

Brass Chromium plated tubler towel rail, 20mm dia D type 600mm long between flanges complete all as specified and as directed. MAKE:- CERA Model no: CG303 or techno commercially equivalent maks specified in PS.

Cutting into existing manholes for connecting new drains by cutting out existing benching for and forming branch, channel (1/2 round or ¾ section) in cement concrete (1:2:4)type B-1 smooth finishing & making good to pipe as per existing by rendering & reforming benching as reqd for 150mm bore pipe complete all as specified and directed.

Plain Cement Concrete (1:2:4), type B1, using 20 mm graded stone aggregate as in coping, benching of manholes and similar work etc complete all as specified and as directed.

4 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed.

Stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts all as specified and as directed.

10mm thick rendering on brick or concrete surface in cement mortar (1:4) and finishing the surface with even and smooth without using extra cement complete all as specified and directed.

Machine pressed (rubber moulded) precast cement concrete inter locking paver blocks of any shape and size conforming to IS 15658-2006 of 60mm thickness, of M-35 grade with grey cement and pigment fixed over and including 50mm thick sand cushioning complete all as specified and directed.

Demolition of cement concrete and pavings not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

Steel form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick (horizontal or sloping) etc, with rough finished flat concrete surfaces complete all as specified and directed.

Demolition and complete removal of existing roof treatment including cement plastering and removing debries out side MD land all as specified and as directed.

Plain Cement Concrete, type B0 (1:2:4) using 12.5 mm graded stone aggregate, 25 mm thick as on roof to provide adequate slope to roof complete all as specified and as directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM(1:3) finishing the surfaces even and smooth with out using extra cement mixed with approved water proofing compound complete all as specified and directed. NOTE :- WPC will be measured and paid separately.

Roof treatment by applying bitumen primer @ 0.27kg/sqm, providing 3mm thick APP modified water proofing membrane weighing not less than 3.8 kg/sqm reinforced with non woven polyester matt weighing not less than 180gm/sqm, having softening point not less than 140 centigrade, having tensile strength of 650 N/sq.cm in longitudinal and transverse directions, the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap applying a coat of blown grade hot bitumen VG-10 over the membrane @ 1.2kg/sqm, top of membrane shall than be finished with solar reflective bituminous aluminium paint @0.10kg/sqm all as specified and as directed.

E/M WORKS

Supply, install, testing and commisioning of factory made LT feedr pillar box of suitable size, CPRI approved , out door type, plinth mounted with channel iron pedestal frame made out of 3.15 mm thick CRCA sheet steel, compartment type, dust proof, free standing, suitable for working on 440 Volts, 3 phase 50 Hz, AC supply, vermin proof, front and rear opening hinged door, powder coated, IP 65 protection, cable alley, cable entry hole at bottom, earth strip 25 x4mm, 3 phase and neutral, 300 Amps aluminium busbar as per IS standards with heat shrinkable colour coded insulation sleeves mounted on FRP insulatrors, drilled holes on bus bar strips for tapping including nuts, bolts and washers , PCC foundation work, with aluminium spreader of suitable size for Contd/--- 2.002

Vertical MCCB DB ,TPN 125 Amps, double door type, TPN 6 way ( Modules 8+ 18) IP 43 , door earthing etc including MCCB 125 Amps 4 pole 16 KA as incomer including taking down the existing complete all as speciifed and as directed.

MCB TPN 415 volts 32 to 63 Amps including taking down the existing complete as specified and as directed.

MCB single pole 240 Volts, 6 to 32 Amps complete all as specified and as directed.

Sub main wiring with four runs of single core FRLS grade 6 sq.mm, 1100 volts grade multi stranded copper conductor cable along with one run of FRLS grade 6 sq.mm PVC insulated single core multistranded copper conductor cable as earth continuity conductor drawn through and including non metalic rigid PVC conduit medium grade of suitable size concealed in walls including taking down the existing complete all as specified and as directed. NOTE:- Four runs of 6 sq.mm cable, one run of 6 sq.mm earth continuity conductor and one run of PVC conduit shall be measured as one unit for payment purpose.

Taking down carefully aluminium / copper wiring / power point wiring (light, fan,call bell socket or power circuits) complete and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

Point wiring complete with 1.5 sq.mm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked with accessories surface type / concealed type wiring, including MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed / mounted on walls with laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including provision of 1.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for. (a) One light point controlled by one switch.

(b) One fan /exhaust fan point controlled by one switch/regulator.

(c) One light point controlled by 2 way switch.

(d) One 3 pin socket out let 5 Amps on independent board.

(e) one bell/buzzer point controlled by bell push.

(f) one 3 pin socket out let 5 A on same board.

Point wiring complete with 2.5 sq.mm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium density ISI marked with accessories surface type / concealed type run on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted / concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, including provision of 2.5 sq.mm PVC Contd/--- 2.015

Contd/--- 2.014 insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. NOTE FOR SL ITEM NO. 2.007 TO 2.013 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring.

LED batten fittings, 18 watts, 6000K, (4 feet long), suitable for indoor applications wall mounted with extruded aluminium heat shink provision, efficient heat dissipation and integrated electronic driver, industrial batten type, powder coated top cover, with bipin holders, connector block , lamp etc., complete all accessories internally pre wired all as per Bajaj, Cat No. 830192 18W CDL / Halonix Cat No. HLB-03-18-CW-AL or techno commercially equivalent makes specified in PS including connecting up twin core twisted flexible copper conductor cable all as specified and directed.

LED tube light fittings, 10 watts, 6000K, (2 feet long), wall mounted with extruded aluminium heat sink provision, efficient heat dissipation and integrated electronic driver, industrial batten type, powder coated top cover, with bipin holders,connector block, lamp etc., complete all accessories internally pre wired all as per Bajaj, Cat No.830206 10W CDL / Halonix Cat No. HLB-03-10-CW-AL or techno commercially equivalent makes specified in PS including connecting up with twin core twisted flexible copper conductor cable all as specified and directed.

2' x 2' Recess mounted LED Luminaire 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission arcylic cover complete with accessories all as per Bajaj Cat No : BZRSQL 36W GZI WH or techno commercially equivalent makes specified in PS including taking out old fittings as specified and directed.with all accessories including taking out old fittings as specified and directed.

2' x 2' surface mounted LED Luminaire 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission arcylic cover complete with accessories all as per Bajaj Cat No : BZSSQL 36 WH or techno commercially equivalent makes specified in PS including taking out old fittings as specified and directed.

Switch Piano, flush type, 5 Amps, 240 Volts single pole. two way with ISI marked including taking down the existing complete all as specified and as directed.

Switch Piano, flush type, 5 Amps, 240 Volts single pole with ISI marked including taking down the existing complete all as specified and as directed.

Switch socket combination 3 & 2 pin, 5 Amps, 240 Volts, flush type multipurpose controlled by one switchincluding taking down the existing complete all as specified and as directed.

Switch socket combination 2 in 1, 3 pin and 2 pin, 5 and 15 Amps flush type, universal including taking down the existing complete all as specified and as directed.

Bell push flush type 5A including taking down the existing complete all as specified and as directed.

Ceiling rose, surface bakelite type, 65 x 50 mm, 2 to 3 terminals including taking down the existing all as specified and as directed.

Stepped type electronic fan regulator flush type including taking down the existing complete all as specified and as directed.

Ding Dong bell, AC 230 volts single pole including taking down the existing complete all as specified and as directed.

Sub main wiring with two runs of single core FRLS grade 6 sq.mm, 1100 volts grade multi stranded copper conductor cable along with one run of FRLS grade 6 sq.mm PVC insulated single core multistranded copper conductor cable as earth continuity conductor drawn through and including non metalic rigid PVC conduit medium grade of suitable size concealed in walls including taking down the existing complete all as specified and as directed. NOTE:- Two runs of 6 sq.mm cable, one run of 6 sq.mm earth continuity conductor and one run of PVC conduit shall be measured as one unit for payment purpose.

Earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge not less than 1.5 m below ground level connected to earth lead by GI wire 4 mm dia by means of bolts nuts, check nuts, washers made out of galvanised iron connected to main switch all as shown in elect plate No 3 of MES SSR Part -I includingn excavation and earth work in any type of soil,funnel, 20 mm dia light grade GI watering pipe with chamber of PCC 1:3:6 type C1 40mm thick of size 450mm x450mm (1:2:4) type B1 for cover slab reinforced with 8mm dia TMT bars 10cm c/c both ways and with 6mm MS hook etc complete all as specified including testing on completion all as specified and directed.

Exhaust fan 230Volts, SP, 300 mm Sweep with BEE five star rating,high speed, heavy duty complete with Louvers, clamps with screws nut and bolts, including wire connections from ceiling rose to Exhaust fan complete with all accessories including writing of MES No with Unit Name on Exhaust fans using stencil with synthetic enamel paint all as specified and as directed.

MCB single pole and neutral 240 Volts, 40 Amps complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for cable laying / errection of poles and getting in hard/dense soil complete all as specified and as directed.

Returning, filling in excavated soil, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard / dense soil etc complete as specified as directed.

Removing the excavated material to a distance exc. 50m but n. exc. 100m and depositing where directed at a level n. exc. 1.5m above the starting point.

Sand cushioning in layers for cables in trenches / ducts for cable using dry river sand including consolidation complete all as specified and directed. NOTE: Punned thickness will be measured for payment purpose.

Bricks, sub class 'B' of old size 230 mm x 115 mm x 75 mm laid in trenches for cable protection all as specified and directed.

Galvinised iron tubing, light grade, 40mm bore with all accessories for cable protection fixed on poles/buildings or laid in trenches including necessary MS clamps, bolts and nuts etc., including taking down the existing complete all as specified and as directed.

XLPE insulated cable, screened, PVC bedded galvanised steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq.mm 2 core connected with suitable lugs complete all as specified and as directed.

Galvanised iron pipe of 25mm dia, medium grade, laid in trenches, floors / fixed to wall with all fittings such as socket, bends, elbow, union etc., complete all as specified and as directed.

Gun metal gate or globe valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

25mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs complete all as specified and as directed.

Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as specified and as directed.

LED Building security light fittings 30 Watts, housing made of die cast aluminium in gray finish with clear acrylic and cast aluminium pipe mounting attachment, IP-66 degree of protection with all accessories and pre wired complete including PVC three core flexible copper conductor cable form ceiling rose to connector of fittings including GI bracket made of GI pipe light grade 25/40 mm dia 1.0 mm long bent in to shapes fitted to the wall with GI clamps of size 32 x3 mm all as per BAJAJ CAT NO: EXNT PN30L WH CR PC SD / HALONIX CAT NO: HLSLD -09-30 WWL-RL or techno commercial equivalent makes specified in PS complete all as specified and as directed.

Cutting existing steel tubing of 50 mm dia for alterations or additions (each cut measured) screwing existing steel tubing for alterations or additions and insertion of new tees of suiatble size all as speciifed and diretcd.

Water heater storage and vertical type, 5 star rated, 230 Volts, 2000 Watts 15 Litres capacity complete all as per Bajaj Cat pat No. CALDIA (150800) or techno commercially equivalent makes specfied in PS with hot and cold PVC connectors (02 Nos) of suitable length complete all as specified and as directed.

20mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, fixed to wall, ceiling or laid in floors complete all as specified and as directed.

Bib taps 20mm dia fancy type chromium plated, alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Brass Elbow (3/4 X ½) 20 mm dia complete all as specified and as directed.

Stop valves, 20mm dia fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed fixed complete all as specified and as directed.

60 Watt LED street light fitting with pressure die cast housing along with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection and impact resistance of IK 08. 4kV inbuilt and 10 kV external surge protection with top opening driver cover for easy maintenance all as per Bajaj, Cat No.:- ENXT P 72 L WH CR PC SD or techno commercially equivalent make of Havells/ Halonix/Philips/Crompton all as specified and as directed.

90 Watt LED street light fitting with pressure die cast housing and toughened glass and individual LEDs with secondary lens optics with IP 66 ingress protection and impact resistance of IK 07. 5kV inbuilt and 10 kV external surge protection with top opening driver cover for easy maintenance all as per Bajaj, Cat No. BRTFG 90W LED CR or or techno commercially equivalent make of Havells/ Halonix/Philips/Crompton all as specified and as directed.

GI pipe brackets on pole/ wall etc made of 40mm bore light grade GI pipe1.5 mtr long suitably bent to shape and fixed on wall/ pole for fixing street light fitting with 2 Nos suitable MS clamps of size 25 x 3 mm size incluiding bolts, nuts, washers all as specified and as directed.

Sub main wiring with two runs of PVC insulated 2.5 sq.mm single core multistranded copper conductor cable and one run of 2.5 sq.mm copper wire as earth continuity conductor drawn through and including rigid non metalic PVC conduit of 20 mm external dia fixed on poles and connecting up all as specified and as directed. NOTE:- Two runs of cable and one run of earth wire and one run of conduit shall be measured as one length.

PRACHANIVA CONSTRUCTIONS

OM CONSTRUCTIONS