REPAIR TO PLUMBING, SANITARY FITTINGS, CHAJJA FACIA, LEAKAGE, SEEPAGE AND OTHER MISC TO OTM ACCN AND MD ACCN IN ZONE-V UNDER AGE B/R-IV OF GE (SOUTH), MEERUT CANTT

Amount

Taking down old existing water proofing treatment from top of RCC/arch slab including taking down of concrete padding or plaster and raking out joints of arch slab and hacking the top of RCC slab, cleaning with water and dispose off rubbish upto 200 meter complete all as specified and directed

M&L PCC 1:3:6 type C-1 (using 20m graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, complete all as specified and directed.

M&L 15 mm thick screed bed on roof surface including flashings and junction of parapets etc., finished even and smooth in cement mortar (1:4), using water proofing compound @ 20ml per 50 Kg of cement consumed or as per manufactures instruction after brushing cement slurry complete all as specified and directed. Note: Water proofing compound consumed under this item will be measured & paid separately.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for providing and lying 3mm thick APP (Aractic ) polypropylene polymer) modified prefabricated five layer, weight not less that 3.6 Kg/Sqm water proofing membrane, black finished , reinforced with non-woven polyester matt make as approved, consisting of a coat of bitumen primer @ 0.40 Ltr/sqm by the same membrane manufactruer, of density 0.87 to 0.89 Kg/ltr at 25 degree celcius temperature and viscosity 70-160cps. Over the primer coat, the layer membrane shall be laid using butane torch and sealing all joints etc after preparing the surface complete as per standard practice as per manufactrer's instructions. The vital physical and chemical parameters of the membrane shall be as under :- (i) Joint strength in longitudinal and transverse direction at 23 degree celcius as 650/450N/5cms. (ii) Tear strength in longitudinal and transverse direction as 350/250N/5cms. Softening point of membrane not less than 150 degree celcius. Cold flexibility upto 20 degree celcius when tested in accordance with ASTM (D-5147). (iii) The laying of membrane shall be got done through the authorized applicator of manufacturer of membrane only.

Cleaning and clearing vegetation, debries from roof top, chajja etc. and disposal of the same to a distance n.exc 100 metre complete all as specified and directed.

Material and labour for racking out joints in brick tiles laid flat in roof etc and including flush pointing in CM (1:3) complete all as specified & directed.

M&L Rendering 15 mm thick (Average thickness) rendering on RCC chajja, roof slabs and projection on top of chajja roof surface including flashings and junction of parapets etc., finished even and fair on in CM (1:4), using water proofing compound as per recommended ratio, after brushing cement slurry complete all as specified and directed.

Repairs to CI/AC down take pipes as in RWP , Gutter for arresting leakage using rubber or fibre based gaskets or cement upto 4th storey and applying one coat of white washing to soffit of chajjas and canopy, upto 4th storey height complete all as specified and directed.

Preparation of old plastered wall surfaces and two coats of cement base paint complete all as specified and directed.

M&L Preparation of new decorated wall surfaces plastered and applying Two coats of weather proof exterior acrylic emulsion paint over a coat of primer of complete all as specified and directed.

M&L Cleaning water tanks 500 ltrs and date of cleaning write down on the tank ( in white paint ) including the removing and refixing the tank and fitted with new union as required and repair work to stop leakage of water or damages occured during removing or refixing the tanks complete all as specified and directed.

M&L Cleaning water tanks 1000 ltrs and date of cleaning write down on the tank ( in white paint ) including the removing and refixing the tank and fitted with new union as required and repair work to stop leakage of water or damages occured during removing or refixing the tanks complete all as specified and directed.

S&F in repairs Ball valves high pressure PTMT with epoxy coated polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed and suitable for 20 mm bore GI pipe, complete all as specified and directed.

S&F three layers Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity incl Dismantling water tanks & removing to store complete all as specified and directed.

S&F three layers Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity incl. Dismantling water tanks & removing to store complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

M&L for brick work with fly ash bricks, built in CM (1:6) straight or curved exceeding 6mtr mean radius complete all as specified and directed.

M&L for Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6), complete all as specified and directed.

Demolition and breaking of AC/CI/PVC soil, waste, vent and rain water pipes etc of any dia set in cement mortar complete all as specified and directed.

S&F 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall with and including fixing of MS clamps made out of flat iron of size 25mmx5mm including nuts & bolts etc complete all as specified and directed.

S&F 75mm bore Cast iron soil, waste and vent pipes in any length with or without ears (including acessories and fittings like Bends,branch pipes, sockets collers swan necks, cowls etc as per site requirement), with cement joints, laid in trenches or in floors, fixed to wall with and including fixing of MS clamps made out of flat iron of size 25mmx5mm including nuts & bolts etc complete all as specified and directed.

S&F 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall with and including fixing of MS clamps made out of flat iron of size 25mmx5mm including nuts & bolts etc complete all as specified and directed.

S&F in repair PVC bends plain(any radius) for 110 mm bore pipe complete all as specified and directed.

S&F in repair PVC bends plain(any radius) for 75 mm bore pipe complete all as specified and directed.

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore including taking up or down steel tubing & connections complete all as spd and directed.

All as per item No 27.00 here -in- before but herein for 20mm. complete all as specified and directed.

Taking up or down steel tubing & connections, including cleaning & Refixing old steel tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 15mm bore complete all as specified and directed.

All as per item No 29.00 here -in- before but herein for 20mm complete all as specified and directed.

S&f in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F as in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F as in repair 15 mm bore bib tap long body standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms). complete all as specified and directed.

S&F as in repair chromium plated Angle stop valve incl flange, any description, suitable for 15 mm bore pipe,complete all as specified.

S&F in repair brass spindle of No 2.00 / 3.00 / 4.00 or die 5.00 No for CP pillar tap / bib taps / angle cock. complete all as specified and directed.

S&F in repair cast copper alloy spindle brass disc 3/4" for CP wall mixer, WHB mixer and sink mixer pillar tap / bib taps / angle cock, etc suitable for MAP Accn or other Accn complete all as specified and directed.

S&F in repair Legs for CP brass mixer (S alphabat shape)suitable for Wall mixer/sink mixer etc screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F as in repair for standard kit of PVC internal fittings for low level flushing cistern fixed complete all as specified and directed.

S&F in repairs PVC waste pipe 32/40 mm bore as WHB/Sink etc complete all as specified and directed.

S&F in repair curtain rod of 25mm dia stain less steel chromium plated including brackets, stops, rollers etc complete all as specified and directed.

S&F in repair brass choromium plated extension nipple of size 25 to 50 mm for CP bib taps/angle cock etc complete all as specified and directed.

Supply and fixing in repair tank lid/cover made out with 0.63mm thick PGI sheet, 470mm dia or suitable for fixing in water tank of capacity 500/1000 Ltrs including 4 side fastening arrengement with nut and washer having exposed surface sharp edges 08 nos stings by cutting/rivetting of PGI sheet to protect by monkey menance complete as per as per sample,complete all as specified and directed.

S&F for False ceiling with 4 mm thick E board “Everest” make white prelaminated, set embossed reinforced designer ceiling board of oceanic texture fixed over and including powder coated galvanised iron grid frame work of size not more than 600x600 mm having 25mm wide t-section runner made of 0.33mm GI sheet and angle made 0.45mm thick GI sheet suspended with and including 2 mm dia GI wire and leveling clips complete all as specified and directed. Note: All exposed surface of grid shall be powdered coated white) Including dismantling Wall and ceiling boards with frame work(fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

S&F in repair for lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing PVC Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet thickness of insulated insulated PVC wall PVC wall lining 12 mm any description, fixed in any position with nails complete all as specified and directed.

Supply and fixing in repair galvanized MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with all acessories required like screws, beading etc and like in steel windows & doors/wooden windows/aluminium windows & doors, partitions or openings of any type etc. complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Supply & fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each paneall complete all as specified and directed.

Supply and fixing in repair plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

Supply & fix in repair brass chromium plated wall mixer suitable for telephonic shower/ overhead shower with long bend pipe complete all as specified and directed.

Supply & fix in repair 15mm dia single lever one hole basin mixer of superior quality with capstan heads, cromium plated cast copper alloy with hot and cold arrangements with long shank and cup , screws for iron pipe fixed.as in repairs complete all as specified and directed.

S&F in reipair single lever swan neck sink cock with swinging spout (Wall mounted model).chromium plate fancy type cast copper alloy screwed down complete all as specified and directed.

Supply and fixing in repair jet assembly with connecting rod suitable for European type WC suitable for 15mm dia pipe complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and fix non skid glazed ceramic tiles(any shade) 400mmx400mmx7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply & fix Light shade vitrified tiles coloured superior quality 600mm x 600mm x 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 10mm thick screed in CM 1:4 and all as per manufacturer's instruction complete all as specified and directed.

All as per item No. 56.00 here-in-before but in skirting / dado and including 10 mm thick screed bed/rendering in CM1:4 complete all as specified and directed.

All as per item No. 56.00 here-in-before but in skirting / dado and including 10 mm thick screed bed/rendering in CM1:6 complete all as specified and directed.

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets including ridges in roof coverings complete all as specified and directed.

M&L 6mm thick Fiber cement, corrugated or semi-corrugated shets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts complete all as specified & directed.

M&L Fibre cement two piece adjustable serrated ridge, 6mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified & directed.

Supplied and fixed pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified and directed.and as per manufacturer's instructions.

Supplied and fixed pre-painted plain galvanised coating GI based plain sheet 0.5mm thick of any colour as in roof covering / cladding / ridges, fixed with self tapping screws complete all as specified and directed.

S&F MS flate iron as in wind ties for roof cutting tops to shape as directed, drilling holes flat iron fillets including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C1 (20 mm graded stone aggs) as in plinth protection, floor, sub base, path etc. including finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry over and including 15mm screed bed in CM 1:6, in floors with using grey cement and pigment including dismantling of old unserviceable tiles complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 100 mm thick ( by using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed

M&l for rubber moulded precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with using grey cement & pigment laid over and inluding 25mm thick coarse sand laid over sub base all as specified and directed.

Material and labour for floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring, fixed in floor (140mm size), fixed as in repair complete all as specified and directed.

Supply and fix as in repair 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor, complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and remove from site complete all as specified & directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, including all necessory work required for fixing and making good the damaged portion to match with existing complete all as specified and directed.

S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&f 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 250mm size Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F Galvanized MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and including fixed with wooden beading for securing wire gauge with wire stappler complete all as specified and directed.

S&F Stainless steel butt hinges 150 mm in size heavy weight, cold rolled mild steel, fixed with screws or with welding to existing frames, ISI marked, complete all as specified and directed.

S&F barrel tower bolts 200mm of aluminium, anodized extruded section and fixed, 200 mm long, dia of bolt not less than 12 mm, ISI marked, complete all as specified and directed.

S&F Bow handle aluminium anodized of size 150 mm, ISI marked, complete all as specified and directed.

M&l for preparation of new or previously untreated wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc including racking outof joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M & L rendering 15 mm thick on fair faces of brick or concete surfaces in CM (1:4) surface finished even and smooth without using extra cement all as specified and directed.

Material and labour for 10 mm thick rendering in Cement mortar 1:4 on brick or concrete surfaces finished even and smooth without using extra cement

M & L Rendering 10 mm thick in CM (1:3) as in ceiling /facia finished even and fair complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L preparation of New wall plaster surfaces and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed

M&L preparation of new walls and applying two coats of oil bound distemper over finishing the wall surfaces with JK/Birla wall care putty complete all as specified and directed

M& L Preparation of existing walls and applying one coat of oil bound distemper incl repair work like putty, plaster and preparation of required area with primer or extra coat of OBD to merge with existing area of OBD as per requrement on walls including Washing, rubbing down and stopping of distempered, painted surfaces on walls complete all as specified and directed.

Material and labour for rectifying the leakage of bib taps/stop cock/angle valve/pillar taps/angle cock by replacing rubber /PVC washer of required size complete all as specified and directed.

Material and labour for rectifying the leakage of wall mixer/wash basin mixer/sink mixer of any type by replacing rubber /PVC washer of required size ccomplete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

Supply & fix in repairs second class hardwood (SAL) as in plain solid straight chowkats or frames, wrought, rafter, purlins and like truss work etc framed together with glue pinned at joints, with single or double rebates or as in perlins, rafters etc complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

Supply & fix in repair vitrous china wash down water closet pan ( padestal pattern) , white ( excluding fixing bolts, flushing cistern ). Including S & F Flush pipe of polyethylene or low or high density of PVC, 32 mm dia, for low level cistern and S & F white plastic seat cover for WC ( E.T ) white including MS CP or aluminium hinging device complete all as specified and directed.

S & F in repair for CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe Cat Part No.CERA F8030301 complete all as specified and directed.

vibha associates

B.K.construction

jitendra AND Co

Tayal Builders

VIRAT CONSTRUCTIONS

SHAKTI CONSTRUCTION CO