Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 LAccepted-Finance | L1 | Accepted-Finance Ok | |
| 2 | L2₹7.7 L+₹1.2 L (17.8%)Accepted-Finance | L2 | Accepted-Finance Ok | |
| 3 | L3₹12.5 L+₹6.0 L (93.0%)Accepted-Finance 25 KARAMBHUMI SAMASGARH ROAD SAMAGARH BHOPAL MADHYA PRADESH 462044 | BHOPAL | MADHYA PRADESH | 462044 | L3 | Accepted-Finance Ok |
Tender Value
₹9 L
Closing Date
14 Jul 2023, 6:00 pmClosed
DFO Billawar
Office of the DFO Billawar
Construction of Mist Chamber cum Shade House at Dungara Nursery
2023_FD_219332_1
72 of 2023-24
Open Tender
Civil Works
Item Rate
90 days
Dungara Nursery
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
DFO Billawar
Exempted
21 Jul 2023
1 Jul 2023
15 Jul 2023
1 Jul 2023
14 Jul 2023
1 Jul 2023
Amount
Excavation work in excavation by manual means for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts wells cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 M including the disposal of excavated earth upto 1 M from the cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 40mm nominal size) Crushed
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size
Centering and shuttering including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and Fixing of Drip Lock Clear Greenhouse Covering Film.(200 Micron)
Providing and Installation of Humuidifier of standard make
Providing and Installation of Digital Temperature Indicator Controller
Bore Well Drilling of the hand pump well with air rotary drilling rig unit suitable for lowering MS casing of 10mm dia. In suitable drilled bore hole as specifications laid down in IS 2800(PART I) 1991 with up to date amendments.the job is to be done all kinds of soils,boulder,rock collapsible strata,saturated soilsartisan conditions by ODEX/DTH attachments including the cost of all consumeables,like fuel,lubricants and other accesories complete in all respects whole in consolidated/semi consolidated/boulder formation upto desired depth.the job include the cost of lowering of casing assembly and its subsequent welding after every ten feet to lowered up to the drilled/desired depth,the casing is to slotted as per site requirement and the job of slotting supervised by the concerned junior engineer.the casing pipe is provided departmentally from the stores only. The job includes following activites and the items. 1. Collection of soil samples in a sample box having a top lid/locking system to demo the samples as and when required as and when requred during execution. 2. Power supply arrangement required during drilling etc. 3. P/F of well cap as per IS code 2800 with laterst/up to date amendments till the hand pump is installed at site as per the availbility of the stores. 4. Recording the strata details in the drilling job card as given in the tenders documents. Development of tube well with back wash method with air compressor of minimum capacity 1000CFM (300 PSI aur delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the direction of in charge Engineer.
Providing and laying of circular cement concrete blocks of 1.5 dia and 0.3m (1ft) deep in amix of 1:3:6 to give the adequate strength to act as sanitary block for the well and to grout the hand pump assembly in order to make a fool proof sanitary seal for good hygine of the well water.in case the suitable space for the above specification is not available the surface area is to adjusted according the block comprises of a mud mat of 4 inch height and then laying of 8 ionch cement concrete with suitable drainage the block should have aesthetically good appearance.
Cost of Material Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work)100 mm dia. nominal bore Medium
Providing and fixing Hand Pump Complete job
Supplying, fitting and fixing in possition GI pipes of Tata made for underground works with all neccessery accessories special socket, bent,,tee, union, cross,elbo, nipple material, cutting pipe, making threads, cutting trenches upto 1.5 m below surface in all shorts of social and refilling the same as directed. 100 mm dia,medium
Providing and fixing of motor of approved brand ISI make crumpton brand 2 HP inc. All accessories complete job.
Providing and fixing Service Line(Aluminium 10 sq m)
Supplying, fitting & fixing Panel Board with Starter, Voltmetre, Ammeter, Capacitor, etc. all complete. Make - BCH / Approved make.(local qutation rate excluding GST)
Supplying fittings & fixing Meter Box making with GI sheet and GI angle with necessary locking arrangement and jamp the post with concrete all complete as per direction of EIC. (local qutation rate excluding GST)
Supplying and fixing 1.1 KV grade 4 sqmm 3 core copper cable for Submersible Pump-Motor set. Make - Finolex / Havells. (local qutation rate excluding GST)
Water Tank Excavation work in excavation by manual means for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts wells cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 M including the disposal of excavated earth upto 1 M from the cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 Cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 40mm nominal size) Crushed
Centering and shuttering including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 20 mm dia. nominal bore medium
Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 a) 15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 a) 15 mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats completea) 15 mm nominal bore
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 20 mm nominal bore, weighing not less than 40gms
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)20 mm nominal bore
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 15 mm nominal bore, weighing not less than 32gms
Shade Net Excavation work in excavation by manual means for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts wells cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 M including the disposal of excavated earth upto 1 M from the cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 Cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 40mm nominal size) Crushed
Centering and shuttering including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing ang fixing of Green House net
Carriage of Sand av. 20 KM and HL 200 Mtr
Carriage of Bajri av. 20 KM and HL 200 Mtr
TILAK RAJ
Prabhavi Biotech and trading PVT LTD
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .