REPAIRS REPLACEMENT OF INTERNAL ELECTRIFICATION FOR CERTAIN BUILDINGS INCLUDING FITTINGS AND FIXTURES MCB DBS MCBS EARTHING AND SERVICE CONNECTIONS AT OTM ACCN OF MH MDC ASC SUPPLY PIN POSTAL UNIT AND MISC BUILDINGS WELLINGTON STATION AND REPAIRS SER

Amount

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade complete with conduit fittings/accessories with provn of 1.2 mm thick MS/PVC terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed.

All as per Item No 2 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed.

All as per Item No 2 hereinbefore but One 3 pin 5A Socket outlet on same board complete all as specified and directed

All as per Item No 2 hereinbefore but point wiring complete with 4 sqmm for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC casing and caping complete with fittings/ accessories with provn of 1.2 mm thick MS/PVC terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light /Ex-fan point controlled by one switch 5Amps SP all as specified and directed.

All as per Item No.6 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed.

All as per Item No 6 hereinbefore but One 3 pin 5A Socket outlet on same board complete all as specified and directed

All as per Item No 6 hereinbefore but point wiring complete with 4 sqmm for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade in concealed complete with conduit fittings/ accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note :1. Sunken box/ Cover plate for modular plate for modulat switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate. 2. Cutting chases in stone masonry wall will be measured and paid separately.

All as per Item No 10 hereinbefore but One 3 pin 5 Amps socket out let on independent Board all as specified and directed.

All as per Item No.10 hereinbefore but point wiring complete with 4 sqmm for 3 pin 15 A socket outlet on independent board including 4 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

All as per item No.2. hereinbefore but point wiring One light point controlled by two 2 - way switches, with cables 1.5 sqmm size all as specified and directed.

All as per Item No.2 hereinbefore but point wiring for each additional light point on the same switchcircuit all as specified and directed.

All as per Item No.2 hereinbefore but point wiring complete One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size all as specified and directed.

Switch piano flush type 5 Amps SP, one way all as specified and directed.

Switch piano flush type 15 Amps SP, one way all as specified and directed.

Switch piano flush type 15 Amps SP, two way all as specified and directed.

Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings all as specified and directed.

Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

Switch socket combination 2 in 1, 5 Amps multipurpose flush type all as specified and directed.

Switch socket combination 3pin 5A /15 A flush type, 2 in 1 all as specified and directed.

Bell Multi Music type 230 volts single pole all as specified and directed.

Bell push flush type 5 A all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed.

Modular Bell push 6A 230V, AC 50 Hz SP One module all as specified and directed

PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep all as specified and directed. Make: Havells/ Legrand/ L&T.

All as per item No 31. hereinbefore but size 175x100x50 mm deep all as specified and directed.

All as per item No 31. hereinbefore but size 200x150x50 mm deep all as specified and directed.

All as per item No 31. hereinbefore but size 250x200x50 mm deep all as specified and directed.

All as per item No 31. hereinbefore but size 350x300x50 mm deep all as specified and directed.

Modular Metal Flush Box 1/2 module all as specified and directed. Make: Havells/ Legrand/ L&T.

All as per item No. 36 hereinbefore but 3 module as specified and directed.

All as per item No. 36 hereinbefore but 4 module as specified and directed.

All as per item No. 36 hereinbefore but 6 module as specified and directed.

Modular White Cover Plate With Frame White cover plate with frame, 1 module all as specified and directed. Make: Havells/ Legrand/ L&T.

All as per item No. 40 hereinbefore but 2 module all as specified and directed.

All as per item No. 40 hereinbefore but 3 module all as specified and directed.

All as per item No. 40 hereinbefore but 4 module all as specified and directed.

All as per item No. 40 hereinbefore but 6 module all as specified and directed.

All as per item No. 40 hereinbefore but 8 module all as specified and directed.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: ABB/ Legrand/ L&T.

All as per item No. 46 hereinbefore but 8 way all as specified and directed.

All as per item No. 46 hereinbefore but TPN 4 way 415 volts, all as specified and directed.

All as per item No. 46 hereinbefore but TPN 8 way 415 volts, all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

All as per item No. 50. hereinbefore but SPN 230V 32 Amps capacity all as specified and directed.

All as per item No. 50. hereinbefore but MCB TPN 415V 40 to 100 Amps capacity all as specified and directed.

Supply and fix 10W LED lamp, B-22, 5 star lamp, lumen 1200 & 6000K holder type all as specified and directed. Make Havells Cat Part No-LHLDEUEBML8Z010 / Phillps/ CG

Taking down old Unsv Tube Rod, supply and fix 20 W LED polycarbonate (4 ft.) tube rod suitable for 36/40W FTL batten with in-built driver including modification to internal copper wiring of existing fittings all as specified and directed. Make Havells Cart Part No. LHLDDCXCML8Q020/ CG/ Wipro/ Orpit

Taking down old unsv batten, S&F batten suitable for LED Tube 20W LED including copper wiring all as specified and directed. Make-Havells Cat Part No.- LHFXCENNTN1W020/ Phillps/CG

Taking down old unsv FTL fittings, Supply and fix 22W LED 125 Lum/Watts 4ft batten comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. HavellsCat Part No. LHEXBLP7PN1W022 / CG/ Philips / Bajaj.

All as per item No. 56 hereinbefore but 25 Watts Make. HavellsCat Part No. LHEXACP7IN1W025 / CG/ Philips / Bajaj.

Taking down old unsv 2ft FTL fitting Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 20 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make - Havells Cat Part No-LHEXARP7IN1W020 / Philips/ CG/ Orpit

LED luminaire 600mm x 600 mm, 30 watt, 6000K, 100Watts/Luman, 220 V AC surface mounted with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and directed. Make- Crompton Cat Part No-LCTLSNE-30-FO-WW /Philips / Bajaj

LED luminaire 600mm x 600 mm, 36 watts, 6000K, 100Watts/Luman, 220 V AC surface mounted with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and directed. Make- Crompton Cat Part No-LCTLSNE-36-FO-WW /Philips / Bajaj

Round shape 12 watt 220 volts AC 6500K recesse cum surface panel type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make-Havells Cat Part No. LHEAABP7IL1W012 / Philips/CG

Round shape 18 watt 220 volts AC 6500K recesse cum surface panel type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make-Havells Cat Part No- LHEAABP7IL1W018 /Philips/ CG

Taking down old unsv gate light fittings and supply and fixing of 20 Watts IP65 Rated LED Post Top all as specified and directed. Make : Havells cat Part No.- LHFXAMN1TN6F035 CG/ Wipro/ Philips

Taking down unserviceable building security light and Material and labour for LED Security Light fitting of 15 Watt comprising of eposy powder coated housing enclosed with glass cover in frame with protection IP 65 complete with all accessories and lamp colour white all as specified and directed. Make: CG or equivalent in Phillips/ Bajaj

Taking down unserviceable building security light and Material and labour for LED Security Light fitting of 18 Watt comprising of eposy powder coated housing enclosed with glass cover in frame with protection IP 65 complete with all accessories and lamp colour white all as specified and directed. Make: CG or equivalent in Phillips/ Bajaj

Taking down unserviceable building security light and Material and labour for LED Security Light fitting of 20 Watt comprising of eposy powder coated housing enclosed with glass cover in frame with protection IP 65 complete with all accessories and lamp colour white all as specified and directed. Make: CG or equivalent in Phillips/ Bajaj

Taking down old flood light at any height, and supply and fix LED flood light 10 watt with IP 65 PDC flood light high lighting architecturl façade for general purpose lighting with better thermal management complete with all necessary connections all as specified and directed. Make: Havells Cat PartNo. LHEECNP7IB6K010/Philips / CG

Taking down old flood light at any height, and supply and fix LED flood light 20 watt with IP 65 PDC flood light high lighting architecturl façade for general purpose lighting with better thermal management complete with all necessary connections all as specified and directed. Make: Havells Cat PartNo. LHEECNP7IB6K020/Philips / CG

Taking down old flood light at any height, and supply and fix LED flood light 30 watt with IP 65 PDC flood light high lighting architecturl façade for general purpose lighting with better thermal management complete with all necessary connections all as specified and directed. Make: Havells Cat PartNo. LHEECNP7IB6K030/Philips / CG

GI Pipe Medium Grade 40 mm bore bracket of suitable size bent to shape of not less than 1.2m long with clamp made of GI flat Iron of size 32 x 6mm for street light fittings, duly painted with one coat of red oxide primer and two coats of aluminium based paint, fixed on poles with bolts, nuts and washers complete all as specified and directed.

Taking down old unsv geyser and Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece etc. all as specified and directed. Make: Crompton/ Bajaj/ Racold

PVC connections 15mm size with PTMT nuts of length 300mm all as specified and directed.

Bib tap of size 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) all as specified and directed

PVC insulated copper conductor flexible cable 3 core 1.5 Sqmm including taking down old unserviceable copper conductor complete including testing all as specified and directed. Make: Polycab/ Paragon/ Gloster

Takingdown unserviceable Plug and socket and Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20A 240V SP MCB all as specified and directed. Make-Legrand/ ABB/ Havells

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

All as per Item No 76 hereinbefore but in and including casing caping all as specified and directed.

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

All as per Item No 78 hereinbefore but in and including casing caping all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the platee not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical platee No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS bars at 100 c/c , funnel ,watering pipe etc. all specified and directed including testing on completion.

All as per item No. 80 hereinbefore but galvanised iron strip 25×4mm as earthing lead all as specified and directed.

All as per item No. 80 hereinbefore but using copper plate 60×60cm ×3.15mm thick electrode and 20×3mm copper strip as earthing lead all as specified and directed

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire.

All as per item No.83 hereinbefore but galvanised iron strip 25×4mm as earthing lead all as specified and directed

All as per item No.83 hereinbefore but Copper strip 32×6mm as earthing lead all as specified and directed

Air termination, single pointed aluminium rod 12mm dia and 300mm long all as specified and directed.

All as per item No.86 hereinbefore but Copper rod all as specified and directed

Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw all as specified and directed

Cutting chases in stone masonry wall/concrete floor/roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 10cm girth all as specified and directed

Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including making openeing brick/ stone Masaonary Wall as per reqiurement of Exhuast Fan and make good and matching with existing surfaces complete all as specified and directed. Make:Crompton Greaves/ Havells/ Bajaj

All as per item No.90 hereinbefore but size 300mm sweep all as specified and directed

All as per item No.90 hereinbefore but steel body size 300mm sweep all as specified and directed

All as per item No.90 hereinbefore but steel body size 380mm sweep all as specified and directed

All as per item No.90 hereinbefore but steel body size 450mm sweep heavy duty all as specified and directed

Taking out unserviceable heating element and supply and fix new heating element 1.5 KW Dual clip type with rubber gasket suitable for geysers up to 25 Ltr capacity all as specified and directed.

Taking out unserviceable heating element and supply and fix new heating element 1.5 KW Round type with rubber gasket suitable for geysers up to 50 Ltr capacity all as specified and directed.

Taking out unserviceable heating element and supply and fix new heating element 1.5 KW Triangle type with rubber gasket suitable for geysers up to 50 Ltr capacity all as specified and directed.

Taking out unserviceable thermostat and supply and fix new thermostat suitable for 25 Ltr capacity geyser , range 30° C to 80° C and acting at 70° C all as specified and directed.

Servicing / repairs to DG Set 10 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smoth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on Filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 5 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 7.1 Ltr.

Servicing / repairs to DG Set 15 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smoth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 5 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 7.1 Ltr.

Servicing / repairs to DG Set 25 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smoth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 6.5 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 14.5 Ltr.

Servicing / repairs DG Set 30 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smoth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on Filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 6.5 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 14.5 Ltr.

Servicing / repairs to DG Set 35 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smoth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on filter Element for lubricating oil - 1 No. (c) Kirloskar Oil Premium (Engine oil 15W 40) - 08 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 16 Ltr.

Servicing / repairs to DG Set 45 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smoth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 08 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 16 Ltr.

Servicing / repairs DG Set 50 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smoth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 09 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 20 Ltr.

Servicing / repairs to DG Set 63 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smoth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Primary & Secondary Fuel Filter Element - 2 Nos (b) Spin on filter Element for lubricating oil - 1 No (c) Kirloskar Oil Premium (Engine oil 15W 40) - 09 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 20 Ltr.

Servicing / repairs to DG Set 200 KVA capacity (Make : Kirloskar) by checking all running parameters and adjusting / caliberating for smoth functioning including cleaning of diesel tank and supply and replacing the following items complete (a) Fuel Filter element (Pre) - 1 No (b) Spin on Filter Element for lubricating oil - 02 Nos (c) Kirloskar Oil Premium (Engine oil 15W 40) - 16 Ltrs (d) Coolant Make : Valvoline or eqiuvalent - 22 Ltr. (e) Air Filter Element - 01 No. Note for Item 99 to 107 : Servicing / Repair to DG Set for Item Sl. No. 99 to 107 is to be carried out through authorised service centre of OEM duly approved by accepting officer and test report of the same has to be submitted on completion of work.

Taking down old unserviceable Battery of any size Supply and fix of battery 12 volts 90 AH plates complete all as specified and directed. Make: Exide GENPLUS Type: GP110D31L or equivalent to Amron/ TATA

Taking down old unserviceable Battery of any size Supply and fix of battery 12 volts 180 AH plates complete all as specified and directed. Make: Exide GENPLUS equivalent to Amron/ TATA

Supply and fill Electrolite water for battery use all as specified and directed.

Supply and fill distilled water for Battery use all as specified and directed.

Self starter 12 volts duly rewinding and replament all required accessories etc of DG sets capacity from 10 KVA to 63 KVA DG set complete and testing including fixed in repairs all as specified and directed.

Self starter 24 volts duly rewinding and replament all required accessories etc of DG sets capacity 200 KVA DG set complete and testing including fixed in repairs all as specified and directed.

Power contactor 4 pole type MCX-41 in repairs including taking down old unserviceable contactor complete all as specified and directed.

Servicing / repairs and testing of AMF Panel of DG Set 200 KVA by replacement of unserviceable following spares parts including re-doing the cable termination with new lugs all as specified and directed. (i) Over Load Protector - 02 Nos (ii) Single Phase preventor 415 VAC - 01 No (iii) MCCB 400 Amps 36 KA 3 pole - 02 No (iv) MCB rating C-32 SP - 05 Nos. (v) Control Wiring Copper - 01 Job

Taking down old unservicable changeover Supply and fix 4 pole onload changeover switch with sheet Steel Enclosure 63 Amps capacity all as specified and directed. Make Havells Cat Part No. IHCNFE0063/ L&T/ Legrand

Taking down old unservicable changeover Supply and fix 4 pole onload changeover switch with sheet Steel Enclosure 40 Amps capacity all as specified and directed. Make Havells Cat Part No. IHCNFE0040/ L&T/ Legrand

Taking downold unservicable generator controller Supply and fix KG934 (version 2) KOEL GREEN generator controller all as specified and directed.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 3.5 Core all as specified and directed.

XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 Sqmm 3.5 Core all as specified and directed.

Servicing / repairs and testing of solar street light panel of any model including removing electrical connection and checking panel battery, replacement of spares etc. all as specified and directed.

Supply and replace 12 amps charge control unit 12 volts all as specified and directed.

Supply and replace 12 volts 100 Ah Tubular battery all as specified and directed. Make: Exide/ Amron/ TATA

Supply and replace 22 Watts solar LED fitting with CCU matching with existing make and size all as specified and directed

Servicing / repairs and testing of solar water heater and checking panel and replacement of spares etc. all as specified and directed. Note: (i) Spares will be measured and paid separately. (ii) Spares to be changed shall be of same make as per existing.

Supply and replace Heating Element as per existing model for solar water heater all as specified and directed.

Supply and replace toughened glass for solar collector of solar water heater all as specified and directed

Supply and fill distilled water for solar water heater all as specified and directed.

Air termination, single pointed aluminium rod 12mm dia and 300mm long all as specified and directed.

Air termination, single pointed, copper rod 12mm dia and 300mm long all as specified and directed.

Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw all as specified and directed.

Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified and directed.

Galvanised iron strip 32 x 6mm buried in ground all as specified and directed.

Copper strip 20 x 3.0 mm with saddles and fixing screws etc. for roof onductors and down conductors above ground all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 32 × 6mm means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting out in soft /loose soil for laying for under ground cable all as specified and directed.

Cutting PCC/road 200mm thick for laying of cable all as specified and directed

Returning filling in including spreading, levelling watering and well ramming in layer not exceeding 25 Cms all as specified and directed.

Material and labour for removal of excavated surplus soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Supply and spreading sand in trenches as cushioning to under ground cable on top and bottom of cable all as specified and directed.

Material and labour for brick sub class 'B' to be laid over dry sand cushioning in trenches as protection to cable all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 using 20mm graded stone aggregate for making good of road finished fair and even and pole coping all as specified and directed.

Material and labour for light grade GI pipe 40mm dia for cable protection all as specified and directed.

Aalternator (battery charger) 14 volts 35 Amps duly rewinding and replament all required accessories etc of DG sets capacity from 10 KVA to 200 KVA DG set including fixed in repairs complete and testing all as specified and directed

Battery lead copper of 50 sqmm as per sample (Red and Black colour) and taking down old unserviceable battery lead all as specified and directed

Battery terminal positive marking /negetaive marking of brass of existing size and taking down old U/S battery terminal all as specified and directed.

sree devi construction

ACE PROMOTERS

Sri Ragavendra Construction

Saket Enterprises