REPAIR / MAINT OF JOINERY WORKS, WINDOWS, DOORS, PLASTERING, BRICK WORK, GRILL, FLOORING INCLUDING PERIODICAL SERVICES AND OTHER MISC WORKS INSTALLATIONS AT AF STN DIGARU

Amount

M/L for two coat of white wash on walls including preparation of old treated plaster surfaces by washing , rubbing down stopping complete all as specified and directed.

M/L for two coat of white wash on ceilings including preparation of old treated plaster surfaces complete all as specified & directed.

M/L for preparation of old treated plaster surfaces and applying One coat of oil emulsion distemper white or tinted complete all as specified and directed.

M&L for one coat of plastic emulsion incl preparation of any old surface of description over 10cm girth or width, not otherwise described complete all as specified and directed.

M/L for preparation of old treated plaster surface and applying one coat of cement based paint complete all as specified and directed.

M/L for preparation of old treated wooden surface of any description not otherwise desceribed over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Ditto as per item No 6.00 above but surface not exceeding 10 cm girth complete all as specified and directed.

M/L for preparation of old treated steel surface of any descreption not otherwise described over 10 cm width or girth and applying one coat of sythetic enamel paint complete all as specified and directed.

Ditto as per item No 8.00 above but surface not exceeding 10 cm girth complete all as specified and directed.

Demolition of brick work in cement mortar incl all quions, arches, pillers etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks strait or curved on plan exceeding 6 M mean radius built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbring down with water etc. complete all as specified and directed.

M/L cement plaster 15mm thick on fair faces of brick or concrete surface in CM 1:6 finished surface even and smooth without using extra cement complete all as specified and directed.

M/L for three coat of white wash on wall including preparation of new plastered surfaces complete all as specified and directed.

M/L for two coats of cement base paint over a coat of primer on wall including preparation new plastered surfaces complete all as specified and directed.

Complete removal of existing treatment and applying two coats of OBD over a coat of alkali treatment primer over a coat of 3mm thick wall care putty on wall complete all as specified and directed.

M/L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm high complete all as specified and directed.

M/L for writing stops, commas, short, dashes, hyphens, brackets, etc. complete all as specified and directed.

Taking down shutter only not exceeding 1 Sqm each complete all as specified and directed.

Ditto Item No 19 but exceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed.

Taking down chowkhats or frames not exceeding 1.5 sqm each with shutter (without taking of shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames exceeding 1.5 sqm but not exceeding 4 Sqm each with shutter (without taking of shutters from the frames) complete all as specified and directed.

S&F for second class hard wood for plain solid straight chowkats & frame wrought framed related on the solid rounded or chafered, put together with glue pined at joints complete all as specified and directed.

Taking down shutter of any discription not exceeding 1 Sqm each, refixing in the same opening complete all as specified and directed.

Ditto Item No 24 but exceeding 1 Sqm & not exceeding 2 sqm each complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on the both side complete all as specified and directed.

S&F 30mm thick glazed and skelten shutter open rebated and prerepair to receive glass, gauge etc with sash bars, edge of framing, plain/chamfered or rounded, fitted with cut and metered beads with second class hard wood complete all as specified and diredted.

M&L 30 mm thick plain framed pannelled shutter (any number of panels) with panel of timber flat on both sides (feather edged) or of veneered particle board medium dencity, wood particle board with commercial face veneers supplied to fitted to chowkats complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification and drawing, including making good (such as rendering and white wash matching to exixting surface) to the existing surfaces complete all as specified and directed.

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing shown on page -156 of MES SSR Pt-II complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 125 mm long complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 100mm mild steel butt hinges medium weight all as specified and directed.

S & F 75mm stainless steel butt hinges complete all as specified and directed

S&F MS sliding door bolt plate type, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and 2 on staple plate – 300 mm long complete all as specified and directed.

S&F 150 mm aluminium anodised handels cast type complete all as specified and directed.

S&F 125 mm aluminium anodised handels cast type complete all as specified and directed.

Hacking out old broken glass not exceeding 0.5 Sqm area each (any thickness, size, quality or description) from metal frame inclulding punching or drilling out old glazing pins / spring clips providing fixing new ones complete all as specified and directed.

S&F mortice lock vertical type size 100mm mild steel 4 lever complete all as specified and directed.

S&F MS flat iron 25 x 4 mm as in hold fast etc and the same confirming to FE290 complete all as specified and directed.

S&F Powder coated (min thickness of powder coating 50 micron) Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat forfixing etc. complete all as specified & directed by Engr-In-Charge.

S&F Powder coated (min thickness of powder coating 50 micron) anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F Powder coated (min thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F Aluminium die cast body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters 851mm to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised 150mm long with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F of 4 mm thick frosted glass, cut to shape and size n exc. 0.50 sqm in each pane fixed in aluminium frame or louver complete all as specified and directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium anodised fillets with screws complete all as specified and directed.

S& F 5 mm thick sheet glass,ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F of Anodised aluminium composit pannel 6mm thick with necessary joints and clits by using of stainless steel screws complete as per requirement and direction by Engineer-in-charge.

S&F of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction by Engineer-in-charge.

M/s Ravi Enterprise

M/S. SUBHAS CONSTRUCTION CO.

M/s Harshita & Co

M/S TRADE CENTRE

M/s Capital Traders

M/s Rawat Enterprises

Ms N D Enterpise