refurbishments integrated landscape and re-llumination of existing gardens of Mennezes braganza, Mermaid, FL gomes and Albamar

Amount

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.

Demolishing brick work in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

Dismantling steelwork in single sections in R.S., joists including dismembering and stacking within 50 mts. lead

Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.

Dismantling tiled roofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

TRANSPORTATION AND CARRIAGE OF MATERIALS (B) By mechanical transport including loading, unloading and stacking upto lead of 10 km (ii) Earth

Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m. Ordinary Soil

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5m in width or 10 sq. m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. a) all types of soil

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Dewatering the trenches and bailing out water including removal of slush, mud etc. for any depth and disposal of pumped mud, water, slush to suitable point not forming circuit of return of pumped water to the very trench, by employing diesel generated pump

Close timbering in case of shafts wells, cesspits, manholes, and the like including strutting, shoring and packing cavities(wherever required) complete. (measurements to be taken of face area timbered) For depth exceeding 1.5 m but upto 3.00 m

Rubble packing with hard laterite stone under floors including watering, ramming and consolidating etc. in pipeline trenches and other foundations complete.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.

Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.

Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 river pebbles 40mm nominal size) excluding cost of centering, shuttering and finishing in: All works upto plinth level

Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 river pebbles 40mm nominal size) excluding cost of centering, shuttering and finishing in: In retaining walls , return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level.

Providing and laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) excluding the cost of centering, shuttering and finishing etc. Kerbs, steps and the like at or near ground level

Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc: String courses, copings, bedplates, anchor blocks, plain window sills and the like.

Providing & laying damp proof course 25 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agg. 10 mm nominal size).

Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building.

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size)

Centering and shuttering including strutting, proping etc. and removal of form for :Foundations, Footings, Bases for columns

Centering and shuttering including strutting, proping etc. and removal of form for :Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

Centering and shuttering including strutting, proping etc. and removal of form for :Columns Piers Pillars abutments posts and struts( square rectangle polygon in plan)

Centering and shuttering including strutting, proping etc. and removal of form for :Suspended floors, roofs landings, shelves & their supports

Centering and shuttering including strutting, proping etc. and removal of form for :Cornices & Mouldings

Providing TMT steel reinforcement bars of SAIL, TATA,VIZAG make only(Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Procurement and installation of Green Mesh of 40mm size, 1.5mm braided for Futsal Court fitted using nut and bolts.(using of ladders, Electricity & Water are in clients scope)

18 mm thick cement plaster in two coats under layer 12 mm thick cement plaster1:5 (1cement: 5 coarse sand ) and top layer 5 mm thick with cement plaster 1:3 ( 1 cement :3 coarse sand ) finished with sponge. (External)

Providing and applying on a well prepared vertical surface Masterseal 550EL of BASF make or equivalent elastomeric flexible, two component polymers modified cementitious composite system that requires no addition of water at the site. The product shall be applied in minimum two coats to achieve total DFT of 1mm. The material shall be mixed and applied fully in accordance with the manufacturer's instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength

Neat cement Punning

Rough cast plaster with a mixture of sand and gravel or crushed stone from 2.36mm to 12.5mm nominal size dashed over and including fresh plaster in two layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm cement plaster 1: 3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.

Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.

White glazed tiles 6 mm thick in skirting, risers of steps & dado on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand and jointed with white cement slurry.

Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

Cuddappah stone slab machine cut flooring over 20mm (average) thickness of cement mortar 1:4 (1 cement : 4 coarse sand laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete - 25 mm thick.

Providing and fixing Kota stone tread tiles 35mm thick in single piece with rounded of nosing antiskid groove laid on and including 20mm (average ) thk bed of cement slurry including pointing with pigmented cement slurry to match the shade of the slab, cleaning etc. complete.

Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.

Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. 60 mm thick in Grey colour (M35 grade)

Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete.600x600 light shade .

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqmc. Jet Black

Providing and fixing Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting,dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete (A) Jet black

Crazy ceramic tile flooring (China Mosaic flooring), with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in-charge

Providing and fixing of vitrified tiles (PAVIT) of size 400X400X9mm of series of the product or the size as specified by the arhitect with cement mortar 1:4 (1 cement :4 fine sand) slurry and colour pigment and cleaning the surface etc. complete as directed by the engineer in charge

Supplying and laying the superior quality granite cobbles/stone of approved size and colour. The width for laying cobbles/stone as specified in the dwg., cleaned and polished, complete as per the direction of the Engineer-in-charge.

Providing and fixing Azulejos Hand Painted Tiles One Colour or Multi-Coloured Design (150mm x 150mm) on the column face. The tile to be placed along with cement mortar 1:3 and joints to filled with joint filling materials, complete as directed by the Engineer-in-charge.

Supply and apply of cushion sports flooring (5 Layers: having one coat of Water based PU Primer, One coat of Resurfacer, One layer of Pre – Base color Coating, One coat of Top coat Two Component of water Based PU), Final Coat, Line marking. Applied on Concret surface after cleaning of surface and removing all dust and lose particles from the surface

Supplying and fixing Pre-cast cement concrete kerb-stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. (B). Size 30cmL X 40cm H X 15cm T

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type (BWP), core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & fixing bright finished brass 100 mm. mortice latch & lock & a pair of levers, handles with necessary screws etc. complete (Indian make of approved quality).

Providing 7 lever brass padlock with 4 keys, all complete as directed by the Engineer-in-charge.

Supplying and laying in position coloured(Green, Dual Tone) tile roofing, Ridge tiles and Con Barge tiles of make Monier Elabana concrete tile /Lafarge or with approved equivalent brand, with battens laid by mortar 1:3( 1cement : 3 fine sand) of section 0.04cms x 0.025cms or as directed by the Engineer-in-charge over the R.C.C. slab at c/c distance of 30cms etc.complete as directed by the Engineer-in-Charge.

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand :4 granitic or basaltic aggreate 20mm nominalsize) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.

Providing and fixing prefabricated -CAST IRON ORNAMENTAL compound Fencing of height 1.05m as per the approved drawing with Holdfasts to the side pillars true to alignment, with cement mortar 1:1(1cement :1Fine sand)by drilling necessary holes and making the walls good as directed by the engineer-in Charge.(Painting to be paid separately) etc.. complete

Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section

Providing and Placing of C.I manhole frame & Cover(500 mm dia Wt 116(230) kg)

Supplying and fixing of Factory made Precast RCC slabs at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge: Size 900 x 400 x 150 mm with steel reinforcement not less than 7 kg per unit -30 T capacity.

Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid, whth C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad, 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete, including cutting and making good the walls and floors where required: W.C. pan with white plastic seat and lid

Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid, whth C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad, 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete, including cutting and making good the walls and floors where required: Angle back was basin size 600 x 480 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.

Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw

Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work). f)50mm nominal bore

Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality for each toilet block: 32mm nominal bore .

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality for each toilet block:25 mm nominal bore .

Providing and fixing ball valve (brass) of approved quality : High pressure with P.V.C. floats: 25mm nominal bore

Providing and fixing non-return valve of approved quality : 32mm nominal bore .

Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : 150 x 100 mm size –P or S type

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 1 1/2: 3 mix (1 cement: 1 1/2 coarse sand ; 3 graded stone aggregate 20mm nominal size foundation concrete 1:1 1/2:3 mix (1 cemet ;1 1/2 coarse sand :3 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610 mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:110 mm dia

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:75 mm dia

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :100 mm dia

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :75 mm dia

Providing and fixing double “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : a) 110 mm dia

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 75mm dia

Providing and fixing R.P.V.C. vent cowl: 110 mm dia

Providing and fixing R.P.V.C. vent cowl: 75 mm dia

Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 15 mm nominal bore

Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993 20 mm nominal bore

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 15 mm nominal outer dia pipes

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 25 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 25 mm nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 32 mm nominal outer dia pipes.

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.

Supply of inferential, dry dial,type domestic water meter for horizontal installation ,duly sealed against tampering with couplings at both ends having pulse output facility compatable for automatic reading system conforming to IS:779-1994 and ISO 4064 and bearing EECMark along with test certificate from FCRI or NABL as desired by the department: 25mm in dia. Class B multi jet water meters

Providing and installing exercise equipments in the Open Gym Area:1. Multistation

Providing and installing exercise equipments in the Open Gym Area:2.Air Walker Double

Providing and installing exercise equipments in the Open Gym Area:3.Back Shaper Rower

Providing and installing exercise equipments in the Open Gym Area:4.Sky Walker

Providing and installing exercise equipments in the Open Gym Area:5.Tai Chi Wheel

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge: ROCK SCRAMBLER-HT 1.5 MTR

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. FRP STEP LADDER-HT 1.5 MTR

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. ROTO RAILING

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. SQUARE DECK-HT. 1.5 MTR

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. SQUARE ROOF

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. FRP SPIRAL SLIDE HT.1.5 MTR

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. WALKING BARREL

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. A TO B SCRAMBLER

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. BRIDGE LADDER

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. BALANCING BEAM

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. FUNNEL SCRAMBLER

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. Packing and Forwarding

Providing and installing the exercise equipments in the Children Play Ground on the RCC bed of 150mm and covered with 36mm Thick SBR with EPDM Insitu Rubber Flooring. The steel plate to be pre-installed in the PCC bed for corresponding stretching equipment, complete as directed by the Engineer-in-charge. Assembly

Supply and Filling with approved black garden soil and spreading the same in soft landscape areas with layers of 20cms thickness in sequence and depths as specified by consultants

Supply and stacking of local sand (Grading zone iii or coarser) dump manure (cowdung) on site along with mixing on site of Good earth (Good earth supplied and already quantified ) including mixing earth, sand and cowdung in proportion of 7: 2.5 : 0.5 (7 parts of good earth to 2.5 parts of sand to 0.5 part of cowdung) or as directed by the engineer incharge and then spreading over planter areas as well as filling in excavated pits, planters, flower beds etc in required thickness as per specification or as directed by the engineer incharge and carriage up to 200 m lead

Supply and grassing with following types of grasses by laying and spreading ready nusery grown dense carpets/turfs with size 2 feet x 1feet minimum ,and of minimum green cover height of 1.5inches including watering and maintenance of the lawn for 12 months or more till the grass forms athick lawn. for 60% of surface areaZoysia Tenuifoliagrass (Mascrene or Mexican Grass)

Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. 1. Sampurna - 19:19:19

Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. 2. Urea

Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. 3. Neem cake

Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. 4. MOP - Murrete of Pottash)

Supply and application of manure and fertilizer as per horticultural specifications and as instructed by consultants on site. 5. Micronuitrient +mix -

Supply and Application of pesticides and insecticides as specifide by consultant and as per horticultural specifications on site. Chloropyrifos - 20% EC

Supply and Application of pesticides and insecticides as specifide by consultant and as per horticultural specifications on site. Monocrotophos- 50%

Supply and Application of pesticides and insecticides as specifide by consultant and as per horticultural specifications on site. Sevin Powder

Establishment of as per specifications MANURE based VERMI COMPOST with PULVERISATION as instructed by consultants with regular sequence of works on site along with stone masonary edge on the perimeter size 4mtsX3mtsX1 to 2mts average as specified in design

Providing and application of MANURE - FARM YARD MANURE to soft landscape areas as specified by consultants as per MORTH specifications 307

Treatment of lawn areas with insectisides, pesticides by application of Lindane ( Zuari Agro Industries) and dithane -m-45 ( Bayer India Ltd) as per manufacturere's recommendation or specification and anti termite solution for lawn areas with chloropyriforos dust 1.5% atelast 3" to 5" below the surface of ground (intensity of dosage should be 1.5 kg per 100 sqm) as per specification or direction of the engineer incharge:Lindane

Treatment of lawn areas with insectisides, pesticides by application of Lindane ( Zuari Agro Industries) and dithane -m-45 ( Bayer India Ltd) as per manufacturere's recommendation or specification and anti termite solution for lawn areas with chloropyriforos dust 1.5% atelast 3" to 5" below the surface of ground (intensity of dosage should be 1.5 kg per 100 sqm) as per specification or direction of the engineer incharge:Dithane -m-45

Treatment of lawn areas with insectisides, pesticides by application of Lindane ( Zuari Agro Industries) and dithane -m-45 ( Bayer India Ltd) as per manufacturere's recommendation or specification and anti termite solution for lawn areas with chloropyriforos dust 1.5% atelast 3" to 5" below the surface of ground (intensity of dosage should be 1.5 kg per 100 sqm) as per specification or direction of the engineer incharge:Chloropyriforos dust

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.' 4 Core 16 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 sq.mm

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(5) 4 x 16 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(2) 3 x 4 Sq. mm.

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.' 3 Core 1.5 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Laying of one number PVC insulated and PVCsheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick ,protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata: '(b) In rocky strata

Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required:'(b) In rocky strata

Supply,installation,testing and commissioning of outdoor type feeder Panel as specified and complete with Internconnections, earthing etc. :'a) Tinned copper busbars ,'b) 7 tank pre-treatment, 'c) Oven baked epoxy paint finish - RAL 7032, 'd) 9 nos. 2 A SP MCB for control circuit, 'e)1 nos Digital Voltmeter and ammeter, 'f) 1 nos RYB indicating lamps LED type, 'g) 1 nos. 16A TP MCB With 3 phase meter box sealable, 'h) 6 nos. 25A 2P RCCB, 'i) 4 nos.16A TP MCB, 'j)6 nos -2 pole power contactor 440V 16A for time switch, 'k) surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for three phase and neutral

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately). '(a) In soily strata

Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)

Providing and fixing 25 mm x 5 mm copper strip on surface in recess for coneections etc. as required

Supplying and laying 25 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Supplying and fixing 0.5 A to 5 A rating, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required"'(f) SP, Cat B

Supplying and erecting KL-4517 Imperial Mini, Dimension : Ø425 x 635, Wattage : 50W LED. Imperial Mini KL-4517 50W LED WW,NW,CW Asymmetrical, Integral Dimension : Ø425 x 635 Mounting: D1 Colour: Graphite Grey,Anthracite grey,Jet Black IP: 65 on provided pole/ bracket.

Providing & erecting KP-4786 Flat Lighting Pole, Ht.3050Flat Lighting Pole 3.50m Flat Lighting Pole Height (in mm): 3050 PoleSize:Ø60.3 / Ø139.7PoleType: P8 Arms: -PoleSize: Ø60.3 / Ø139.7 Colour:GraphiteGrey,Blac with foundation bolts on provided foundation.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).

Providing & erecting 8 m high galvanised conical pole with foundation bolts having bottom dia. from 155 to 190 mm, top dia. from 65 to 75 mm on provided foundation as per specification no. OH-PL/CPL.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Supplying and erecting LED Flood light fitting of 200W, including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG ODF/FLS-2

Supplying & erecting of underwater light of 36 watts IP68 luminaire and driver with Hard chrome plated molding stainless steel (powder coated),High efficiency, long life LEDs,Silicon-sealed glass and housing, High purity lenses for superior performance,to be installed under the water

Supplying and erecting Nebula - Bracket KL-4270 18W LED WW,NW, Integral, Including KL-8160 Two Way - 3 Pin IP68 Connector Dimension : 160 x Ø100 x 154 Colour: Graphite Grey,Anthracite Grey (RAL : 7016),Jet Black (RAL : 9005) IP: 66 IK: 06

Supplying and erecting LED Flood light fitting of 70- 80W, including lamp, with PF > 0.95,class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG ODF/FLS-2

Supplying and erecting LED Flood light fitting of 90-100W, including lamp, with PF > 0.95, class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG ODF/FLS-2

Supplying and erecting highbay LED fitting IP 65 with lamp 70W-80W, PF >0.95 duly connected complete with accessories as per specification no. FG-ODF/LED

Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 200 x 150 x 150 mm. complete on pole as per specification no. CB-SB

Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for upto 4W-6W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface.

Supplying & erecting of KL-4710 Carley Square Bollard, Dimension : Sq.150 x 1000, Wattage :10W LED. Carley Square Bollard KL-4710 10W LED WW,NW,CW, Integral Dimension : Sq.150 x1000 Mounting: M36 Colour: Graphite Grey,Anthracite grey (RAL : 7016),Jet Black (RAL : 9005) IP: 65 IK:07

Supplying and erecting Recess mounted 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Providing & erecting KL-5444Astral, Dimension : Ø400x807, Wattage : 50W LED. Astral KL-5444 50W LED WW,NW,CW Symmetrical, Integral Dimension : Ø400 x 807 Mounting: D3 Colour: Graphite Grey & Gold,Anthracite grey & Gold,Jet Black & Gold IP: 65

Providing & fixing Heavy duty RPVC pipe for main & submain including excavation, backfilling etc. a. 63 mm dia

Providing & fixing Heavy duty RPVC pipe for main & submain including excavation, backfilling etc. b. 50 mm dia

Providing, laying and jointing with liquid cement specials for PVC pipes;a. 90° bends 63mm OD

Providing, laying and jointing with liquid cement specials for PVC pipes;b. 90° bends 50mm OD

Providing, laying and jointing with liquid cement specials for PVC pipes;c. Tees 50mm x 50mm

Providing, laying and jointing with liquid cement specials for PVC pipes;d. 50 OD ball valve taflon

Providing, laying and jointing with liquid cement specials for PVC pipes;e. 60 OD ball valves tafllon

Providing flexible braided PVC pipes in 30m lengthsalong with accessories complete; a. 20mm dia with capit valve and riser

Proving & laying PCC 1:2:4 for anchoring the pipeline 0.30m x 0.10m all around the pipe at bends at 5m c/c

a. Providing and installing Super Flow sand Filter 25m³/hr 2”

b. Providing and installing screen filter 25m3/hr

c. Providing and Fixing C. I. Non Return Valve 2.5"

d. Providing and Fixing Pressure Relief Hydraulic Valve 2”

a. Providing long distance rotary popup sprinklers

b. Providing and installing 10 cm (4") Popup Spray Body

c. Providing and installing 4.6 m Radius adjustable Arc Nozzle sprinklers

d. Providing and installing 5.2 m Radius adjustable Arc Nozzle sprinklers

e. Providing and installing 1.5 x 4.5 M corner strip Left

f. Providing and installing1.5 x 4.5 M corner strip Right

g. Providing and installing 1.5 x 9 M Center strip

h. Providing and installing 1/2" X 30 cm Standard Swing Joint, 4 Swing Elbows

i. Providing and installing 3/4"X30cm standard swing joint

j. Providing and installing Service Saddle 63 mm x 13/4"

k. Providing and installing Service Saddle 50 mm x 1/2"

a. Double Action Air Release Valve 1"

b. Valve Box 9"

c.Supplying and erecting 1 phase, 230 V, 50 Hz, submersible pump set of 0.75 KW/1HP for erection on open well, pump having discharge 35 / 270L.P.M., head 30 / 15 m & pipe of Suction 32 mm/Delivery 25 mm diameter erected with with necessary H type clamps as per specification no. WPOSP

d. Supplying and erecting 1 phase, 230 V, 50 Hz, submersible pump set of 1.5 KW/2HP suitable for erection on open well, pump having discharge 130 / 475 L.P.M., head 21 / 9 m & pipe of Suction 50 mm/Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WPOSP

Providing and installing FRP panel box cabinet(1 nos),IC 8 station control station with SP priventer(1 nos),Toggel switch(1 nos),2"Solinoid valves(9 nos),1 sq mm copper wire approx. 800m with conduiting along with fitting and charging of automization system

Dewatering and cleaning of existing fountain along with new pump and cleaning of equipment

BAGKIYA CONSTRUCTIONS PVT LTD