Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.5 LAccepted-AOC 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹28.4 L+₹1.2 L (4.59%)Rejected-Finance | L2 | Rejected-Finance High Rate | |
| 3 | L3₹28.9 L+₹1.7 L (6.23%)Rejected-Finance | L3 | Rejected-Finance High Rate | |
| 4 | L4₹31.5 L+₹4.4 L (16.0%)Rejected-Finance | L4 | Rejected-Finance High Rate | |
| 5 | L5₹32.0 L+₹4.8 L (17.7%)Rejected-Finance C 1 502 MANDKE ADVANTAGE HOME SOCIETY LULLANAGAR PUNE 411 040 | PUNE | MAHARASHTRA | 411040 | L5 | Rejected-Finance High Rate |
| Sl No | Description | Qty | Unit | M/s Omkar Associates L7 | M/S NAVNEET S MORDE L8 | Parhar Enterprise L2 | DURGA CONSTRUCTION & TRANSPORT L9 | Gauri Associates L6 | Suma Construction L4 | PRANAV ENTERPRISES L5 | R K Construction L1 | SHRINATH CONSTRUCTION L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling asbestose cement (Corrugated or semi corrugated etc) sheets in roof covering complete all as specified and directed. | 850 | Sqm | 20 ₹17,000 Lowest | 100 ₹85,000 | 25 ₹21,250 | 400 ₹3,40,000 | 100 ₹85,000 | 20 ₹17,000 Lowest | 50 ₹42,500 | 40 ₹34,000 | 100 ₹85,000 |
| 2.00 | S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of grade AZ-150 fixed in any position where directed of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws or fixed with L type of J type hook bolts with one corrugation side lap, bent to shape complete all as specified and as directed. | 850 | Sqm | 850 ₹7,22,500 | 900 ₹7,65,000 | 650 ₹5,52,500 | 400 ₹3,40,000 Lowest | 710 ₹6,03,500 | 700 ₹5,95,000 | 800 ₹6,80,000 | 650 ₹5,52,500 | 900 ₹7,65,000 |
| 3.00 | S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick colour as in ridge and straight flashing of grade AZ-150 fixed in any position. complete all as specified and as directed. | 55 | Sqm | 900 ₹49,500 | 900 ₹49,500 | 630 ₹34,650 | 300 ₹16,500 Lowest | 790 ₹43,450 | 650 ₹35,750 | 900 ₹49,500 | 600 ₹33,000 | 900 ₹49,500 |
| 4.00 | Dismantling structural steel work of any description and any position.Complete all as specified and directed. | 16 | Quintal | 750 ₹12,000 | 1,000 ₹16,000 | 150 ₹2,400 | 750 ₹12,000 | 500 ₹8,000 | 300 ₹4,800 | 200 ₹3,200 | 500 ₹8,000 | 100 ₹1,600 Lowest |
| 5.00 | M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and directed. | 3,200 | Kg | 120 ₹3,84,000 | 100 ₹3,20,000 Lowest | 110 ₹3,52,000 | 300 ₹9,60,000 | 120 ₹3,84,000 | 135 ₹4,32,000 | 110 ₹3,52,000 | 105 ₹3,36,000 | 100 ₹3,20,000 Lowest |
| 6.00 | M&L for preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 187 | Sqm | 70 ₹13,090 | 80 ₹14,960 | 62 ₹11,594 | 485 ₹90,695 | 95 ₹17,765 | 70 ₹13,090 | 60 ₹11,220 Lowest | 60 ₹11,220 Lowest | 100 ₹18,700 |
| 7.00 | Demolition of brick work/stone/PCC Block masonry built in cement morter of any description and removing of rubbish outside MD land.complete all as specified and as directed. | 3 | Cum | 350 ₹1,050 | 600 ₹1,800 | 150 ₹450 | 500 ₹1,500 | 200 ₹600 | 300 ₹900 | 1,000 ₹3,000 | 400 ₹1,200 | 100 ₹300 Lowest |
| 8.00 | M&L for block masonry with solid blocks of precast cement concrete class designation D-5 (using 20 mm graded stone aggregate) exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed. | 20.76 | Cum | 4,800 ₹99,648 | 4,500 ₹93,420 | 5,000 ₹1,03,800 | 800 ₹16,608 Lowest | 6,500 ₹1,34,940 | 4,250 ₹88,230 | 4,100 ₹85,116 | 4,500 ₹93,420 | 4,500 ₹93,420 |
| 9.00 | M&L for rendering 15 mm thick on stone/Brick/PCC block masonry surfaces other than fair faces in CM 1:6 .complete all as specified and as directed. | 80 | Sqm | 210 ₹16,800 Lowest | 300 ₹24,000 | 220 ₹17,600 | 800 ₹64,000 | 350 ₹28,000 | 300 ₹24,000 | 320 ₹25,600 | 300 ₹24,000 | 280 ₹22,400 |
| 10.00 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of primer. complete all as specified and directed | 160 | Sqm | 38 ₹6,080 Lowest | 60 ₹9,600 | 48 ₹7,680 | 210 ₹33,600 | 60 ₹9,600 | 75 ₹12,000 | 60 ₹9,600 | 40 ₹6,400 | 50 ₹8,000 |
Tender Value
₹32.4 L
EMD Value
₹64,800
Closing Date
3 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8603 SPL REPAIR TO BLDG NO ET-17, ET - 20 AND PROVN OF CERTAIN REVENUE AND MINOR WORKS AT OLD NDA COMPLEX, AIPT IN THE AREA OF AGE B/R-II UNDER GE (CENTRAL) PUNE
2025_MES_713781_1
8603 SPL REPAIR TO BLDG NO ET-17, ET - 20 AND PROVN OF CERTAIN REVENUE AND MINOR WORKS AT OLD NDA CO
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer (Central) Pune
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer (Central) Pune
₹64,800
Yes
23 Aug 2025
11 Jun 2025
5 Jul 2025
11 Jun 2025
3 Jul 2025
26 Jun 2025
Amount
Dismantling asbestose cement (Corrugated or semi corrugated etc) sheets in roof covering complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of grade AZ-150 fixed in any position where directed of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws or fixed with L type of J type hook bolts with one corrugation side lap, bent to shape complete all as specified and as directed.
S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick colour as in ridge and straight flashing of grade AZ-150 fixed in any position. complete all as specified and as directed.
Dismantling structural steel work of any description and any position.Complete all as specified and directed.
M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Demolition of brick work/stone/PCC Block masonry built in cement morter of any description and removing of rubbish outside MD land.complete all as specified and as directed.
M&L for block masonry with solid blocks of precast cement concrete class designation D-5 (using 20 mm graded stone aggregate) exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.
M&L for rendering 15 mm thick on stone/Brick/PCC block masonry surfaces other than fair faces in CM 1:6 .complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of primer. complete all as specified and directed
M&L for preparing old plastered surface of walls and applying one coat of cement based paint complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc including removal of unerviceable tiles/material ouside MD land.complete all as specified and as directed.
Demolition of cement concrete in ground floors and paving n exc 15cm (below or above ground level) including removal of debris out side defence land complete all as specified and as directed.
M&L for PCC type D-2, 1:4:8 using 40mm graded stone aggregate as in foundation/sub base of floor complete all as specified and directed.
M&L for 20 to 25mm thick machine cut Kota stone flooring over 20mm thick CM 1:6 screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed.
ditto - all as above item no-17 but in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete all as specified and as directed.
M&L for 2nd class soft wood Plain fillets exc 13 Sqcm but n.exc 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads.Complete all as specified and directed.
M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on wooden fillets frame .Complete all as specified and directed.
M & L for 12mm thick Seamless calcium silicate ceiling made siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish with and including Gl frame work size of grid direction of Engr-in-charge as per site reqmt seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with and incl thin layer of putty with gypsum binder, sanding the sufrace till smooth surface is obtained and applying two coats of oil bound distemper over acoat of primer complete all as specified.
Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft / loose soil complete all as specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator) in trenches including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in charge
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material exc. 50m but n.exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for mild steel TMT bar 10mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.
Ditto- as above item no-26 but 8 to 10mm dia as in stirupps complete all as specified and directed.
M&L for formwork to rough finished flat surfaces of footing and plinth beams complete all as specified and directed.
M&L for reinforced cement concrete M-20 nominal mix type A1 1:1.5:3 (using 20mm graded aggregate) for foundations, including rafts, footings, plinth beams, bases for columns, etc complete all as specified and as directed.
M&L for formwork to rough finished flat surfaces of pillars, posts, struts, piers, columns and stanchions etc complete all as specified and directed.
M&L for reinforced cement concrete nominal mix M-20 type A-1, 1:1.5:3 (using 20mm graded aggregate) for columns, pillars, piers, posts and struts etccomplete all as specified and as directed.
Use and waste for formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.
M&L for reinforced cement concrete nominal mix type M-20 type A-1, 1:1.5:3 (20 mm graded aggregate) for roof beams and lintelscomplete all as specified and directed.
M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface ( area of the substructure in contact with backfill to be measured)complete all as specified and directed.
M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre if surface complete all as specified and directed.
M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
M&L for rendering 15mm thick on other than fiar faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement.complete all as specified and directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L for hard core of broken stone of gauge exe 63 mm deposited spread and leveled in layers not exe 15cm thick watered and rammed to a true surface complete all as specified and directed.
M&L for 75 mm of thick PCC (1:3:6) type C-2 as in plinth protection complete all as specified and directed.
S&F pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs hinges, lock strike plate, etc, complete all as specified and directed.
S&F 40mm thick flush shutters, solid core construction with particle board core and plywood face panels commercial type on both sides complete all as specified and directed.
M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over coat of pink primer complete all as specified and directed.
S&F Steel windows with side hung shutters including Sqm projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
Supply only 4.0mm sheet glass, ordinary quality and Sqm glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
M&L for Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders, framed balusters, walk ways: railings; framework of water tanks and similar work conforming to Fe-290 (Gde E-165) complete all as specified and directed.
S&F 150 mm extruded aluminium alloy handies Each fabricated type complete all as specified and directed.
S & F Aluminium anodised barrel tower bolt of extruded Each section 150mm long complete all as specified and directed.
S&F butt hinges 100mm, medium weight complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
S & F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.
Excavating in trenches, n.exe 1.5m wide and n.exc 1.5m in depth for fdn, etc or for shafts, wells, cesspits, manholes, pierholes etc and n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.
M&L for rendering 10mm in CM 1:4 for Sqm external wall surfaces and sponge finished complete all as specified and directed.
M&L for machine pressed precast concrete rubber moulded glossy interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade settled with grey cement and no pigment complete all as specified and directed.
M&L for concealed point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked in PVC conduit of suitable size ISI marked including all accessories etc. with PVC modular boxes/PVC Sunken Boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note:- The quoted rate shall include (a) necessary required length of circuit wiring of 1.5 sqmm 3 run FRLSH copper cable from DB to switch box (b) taking down of copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc Making good of disturbed surfaces will be done by contractor without any extra claims. (c) Cutting chasing of wall if any and making good to the disturbed surfaces with plaster complete
One light point controlled by one switch complete all as specified and directed.
One fan/exhaust point controlled by one 5 Amps one way modular switch and modular regulator complete all as specified and directed.
One 5/6 Amp socket controlled by one switch same board complete all as specified.
One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified
All as per item no. 56 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 5/15 Amps switch socket / Earth plug socket independent and connecting to common earth dolly complete all as specified.
S&F modular switch single pole one way 5/6 Amps including connection complete all as specified and as directed
S&F socket out let 5/ 6 Amps 3 pin modular type incl connection complete all as specified and as directed
S&F modular rotating step type electronic fan regulator( 5 step), 100W /240 volts two module incl connection complete all as specified and as directed
S&F modular socket twin type, 5 pin 6/16 Amps flush type incl connection complete all as specified and as directed
S&F modular switch type single pole one way 15/16 amps incl connection complete all as specified and as directed
S&F in repairs ceiling rose, surface, three terminals incl connection complete all as specified and as directed.
Supply and fix LED in repairs building security light 30 W IP 65 pressure die cast aluminium housing with GI bracket of suitable size complete including clamps , screws etc and dia complete all as specified and directed
Supply and fix aluminium batten tube light 20W including necessary connections with flexible wire 3 core from ceiling rose light terminal complete all as specified and directed
S&F in repairs of MCB SPN DB 8 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail ,230 Volts with double door including cutting of wall for concealed DB and making the the surface good to match with adjucent complete all as specified and as directed
M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl galvanised iron wire 4mm as earthing lead and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit with cover incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and as directed.
Supply and fixing amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified and as directed
SP 6-32 AMP
SPN 40-63 AMP
Parhar Enterprise (BID ID -3344999)
SHRINATH CONSTRUCTION (BID ID -3345582)
Suma Construction (BID ID -3346068)
PRANAV ENTERPRISES (BID ID -3341127)
Gauri Associates (BID ID -3346016)
M/s Omkar Associates (BID ID -3344430)
M/S NAVNEET S MORDE (BID ID -3344906)
DURGA CONSTRUCTION & TRANSPORT (BID ID -3345994)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .