DAY TO DAY MAINTENANCE WORK FOR MD ACCN IN SMQ AREA UNDER GE (AF) ADM AREA AT AF STN GWALIOR

Amount

Demolition of cement concrete (un reinforced) in ground floors n exc 15 cm below or above ground level complete all as specified and directed.

M&L for 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) finished even and rought to receive the top layer complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for non skid ceramic tiles (Coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

All as per item No 5.00 here-in-before but on vertical surfaces including 10mm thick screed plaster in CM 1:4

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

All as per item No-7.00 here-in-before but on vertical surfaces including 10mm thick screed plaser in CM 1:4.

M&L for glazed ceramic tiles (coloured) 450x350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement & sand mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick walls / ceiling including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed..

M&L for 15mm thick rendering in cement mortar (1:4) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering on fair faces of brick work or concrete surfaces on ceiling with CM 1:4 complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) over a coat of primer complete all as specicified. Note:- OBD/Primer shall be applied using hand roller.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer of approved shade/tint complete all as specified. Note:- OBD/Primer shall be applied using hand roller.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified.

Demolition of sunken slab floor or WC and Bath including WC trap etc including taking down loose filling of aggregate in any type and removing where directed and providing water proofing treatment of sunken slab as following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical PIDIPROOF LW of Dr Pidilite or equivalent in make given in Appendix 'B' to PS as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface imperfections. (c) Fixing 40mm dia PVC Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor and seal it (Bath seal tape product of sika/fosroc/ms/ choksey and grouting around the inserted pipes using sika/fosroc/M/s choksey bath seal grout as directed. (d) Make angle fillets by mixing sand cement and sika/fosroc/M/s choskey pidicrete URP on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of M/s Sika/Fosroc/M/s choksey bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by volume and providing upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr fixit or equivalent make as per manufacturer'sinstructions in sunken slab over and including brick bat . (g) Fill the sanitary gaps with M/s Sika/Fosroc/M/s choksey sealing compounds complete all as specified and directed.

Hacking out old broken glass panes 3 mm thick from steel frame including putty/ metal beadings and supply and fix sheet glass ordinary 3 mm thick, area n.exc. 0.50 Sqm in each pane including necessary arrangement i.e oil putty or with metal beadings complete all as specified and as directed

Hacking out old broken glass panes 3 mm thick from wooden framed shutters including putty/wooden beadings and supply and fix sheet glass ordinary quality, 3 mm thick, area n.exc. 0.5 Sqm in each pane including necessary arrangement oil putty/wooden beadings complete all as specified and as directed.

M&L for 3mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings, area n. exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size quantity or description) from wooden frame/Steel frame complete all as directed by Engineer-in-Charge

S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window and Steel door / window completed all as specified and directed.

Supply and fix in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

Repairs of flushing cistern by adjusting the float valve, stopping leakage of PVC connection, PVC/GI bend including replacing of rubber washer check nuts plunges etc for any type of flush complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps(cast iron 100mm bore) (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc complete all as specified in SSR and complete all as specified and directed.

S&F in repairs vitreous China WC pan pedestal pattern white (excluding flushing cistern and flush pipe) but including & connecting to trap set & concrete for making good to floor complete all as spd and directed.

S&F in repairs seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified and directed by Engr-in-charge.

S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and 15mm bore CP, brass pillar Tap fancy type and cutting for and pinning in ends of brackets or errecting stand complete all as specified and as directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe( overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm) complete all as specified and directed.

S&F in repairs chromium plated soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair CP health faucet with 1.25 meter long flexible tube including wall hook complete all as specified and directed.

S&F in repair 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repair pillar tap 15mm dia long body,chromium plated, fancy type complete all as specified & directed.

S&F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F in repair chromium plated fancy type angle stop cock with long shank and cup (concealed type) 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15 mm bore CP wall mixer (2-IN-1) with provison for bath overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without overhead shower) fixed in iron pipes etc all as specified and directed.

Repair to leakage of 15 mm bore CP bib tap/ Pillar tap/ stop cock/wall mixer etc by replacing brass spindles as required complete all as specified and directed.

Repairing of leakage in concealed stop cock 15/20 mm bore by replacing brass spindles half round turn/full round turn as required complete all as specified and directed.

S&F in repair CP, fancy type, tubular towel rail of superior quality 20mm dia 60cm long between flanges complete all as specified and directed.

S&F in repair CP towel ring 200mm dia complete all as specified and directed.

S&F in repair grating doom 125 mm dia with waste hole of stainless steel complete all as specified and directed.

S&F in repair PTMT waste pipe 32 mm bore of length up to 80 cm for WHB / sink/unrinal pots complete all as specified and directed.

S&F in repair PVC connections 15mm size of PTMT nuts of length 450mm long complete all as specified and directed.

S&F in repair 20 mm ball valve high pressure of PTMT with apoxi coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min wt 15mm-142gms/20mm-210gms/25mm -455gms /40mm-690gms) all as specified

M&L for cleaning of overhead tank of any description and in position, removing all scale and dirt by detergent/detergent powder and finally disinfected with bleach wash etc from tanks and mouths of circulating pipes etc and writing the date of cleaning and the due date of cleaning, capacity of tanks exc. 250 litres and not exc. 500 litres complete all as specified and as directed.

S&F 1000 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top), triple layer, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including taking down old tank complete all as specified and directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top), triple layer, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including taking down old tank complete, all as specified and directed.

S&F in repair tank cover black (with arrangement for locking) for 500/1000 ltr water storage tank complete all as specified & directed.

S&F in repair 20 mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 15 mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 1.00 mm thick stainless steel plate rack of over all size 720x600x230 mm of standard pattern complete all as specified and directed.

S&F in repair CP Shower rose of 125mm square with arms 150mm long fixed 15mm dia complete all as specified and as directed.

S&F in repair sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe (overall size 485 mmx420 mm bowl size 410 mm x 330mm x 160mm) complete all as specified and directed

Taking down chowkat or frames with shutter (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing incl 75mm long MS screws for fixing to walls all as per specified in SSR. complete all as specified and directed.

S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Butt hinges, medium weight cold rolled Mild steel 75 mm size etc complete all as specified and directed

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete all as specified and directed.

M&L 35mm thick factory made shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 35mm thick factory made second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) complete all as specified and directed.

S&F Butt hinges, medium weight cold rolled Mild steel 100 mm size complete all as specified and as directed

S&F extruded aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and as directed.

Supply and fix foot operated door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring and cover plate overall length 150 mm complete all as specified and directed.

S&F aluminium, anodised barrel tower bolts of extruded section and fixed 150mm long complete all as specified and directed.

Supply and fix in repairs mild steel 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces on new wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and as directed

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces on new steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and as directed

S&F Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy, 300 mm long complete all as specified and as directed

S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window and Steel door / window completed all as specified and directed.

Resecuring and easing to wooden shutters of any description area n.exc 1 Sqm each without taking down the shutter all as specified and as directed.

Resecuring and easing to wooden shutters of any description exc 1 Sqm but n.exc 2 Sqm each without taking down the shutters all as specified and as directed.

S&F in repairs foot operated door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring and cover plate overall length 150 mm all as specified and as directed.

S&F In repairs Aluminium anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and as directed.

S&F in repairs extruded aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and as directed.

S&F in repairs Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy, 300 mm long complete all as specified and directed.

Taking down shutters exc 1 sq. m and n exc 2 sq. m each and refixing in same openings complete all as specified and as directed.

Taking down shutters n exc 1 sq. m each and refixing in same openings complete all as specified and directed.

S&F Butt hinges, medium weight cold rolled Mild steel 100 mm size complete all as specified and as directed.

S&F Stainless steel hinges, medium weight cold rolled Mild steel 75 mm size complete all as specified and as directed.

S&F Stainless steel Mortice lock double handle, vertical type of 100mm size and of 04 levers complete all as specified and directed by Engr in charge.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal (measured over all as fixed along the centre line over fittings and accessories)

S&F PVC pipe single socketed in any length with rubber ring joints, fixed to walls, 110mm bore complete all as specified and directed.

As per item No. 81.00 here-in-before but 75 mm bore

S&F PVC (SWR) branch piece with access door (single 'T') equal or unequal 110 mm bore complete all as specified and directed.

S&F PVC (SWR) reducers 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75mm Bore complete all as specified and as directed.

Supply and fix in repairs 100 mm dia CI floor trap/nahani trap complete all as specified and directed.

S&F in repair Aluminium alloy curtain hanging rods 20 mm dia including brackets, including fixing arrangement and making up repair work and all fitting complete all as specified and directed.

Taking down 15mm dia GI tubing and connections complete all as specified and as directed.

Taking down 20mm dia GI tubing and connections complete all as specified and as directed.

Cutting chases, pining in, making good to facing where required and pointing in CM 1:3 for concealed water tubing making good, cutting exc 10cm but n.exc 20cm girth in brick walls all as specified.

Supply and fix Unplasticized PVC pipes of bore 15mm, pressure rating 10 Kg/Sqcm pressure rating fixed to walls, celings or in floors etc complete all as specified and as directed

Supply and fix Unplasticized PVC pipes of bore 20mm, pressure rating 10 Kg/Sqcm pressure rating fixed to walls, celings or in floors etc complete all as specified and as directed

Supply and fix in repairs 100 mm dia PVC grating with or without waste hole to floor trap/nahani complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap, 75mm dia plain with grating including jointing with solvent cement etc all as specified and directed.

S&F in repair PVC (SWR) multi floor trap, 75mm dia plain with grating including jointing with solvent cement cement etc all as specified and directed.

S&F in repair PVC (SWR) gully trap, 110mm dia plain with grating including jointing with solvent cement cement etc all as specified and directed.

S & F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) decorative Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cfm manufactured by certified company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws.Material test certificate and authentication should be compulsory provided by the manufacturing company for WC/Bathroom/Toilet /Kitchen/Balcony Doors and Cabinets complete all as specified and directed.

S & F continuous (Piono) hinges ,Stainless steel, bright finished or electrogalvanised, width of flap 30 mm (when open) complete all as specified and directed.

S&F 125 mm size, Hasp and staple, safety type, brass with Stainless steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repair of rubber beading 40mm strip in bottom of door complete all as specified and directed.

S & F soft closing hinges 0 Degree high grade mild steel, bright finish or electrogalvanised as per approved sample for kitchen cupboard shutters complete all as specified and directed.

S&F stainless steel handles of 100mm size for kitchen cabinet shutter complete all as specified.

M/s. Ravi and brothers

M/s NILAY ENGINEERS

M/s Shubham Construction Co.

M/s Raaj Construction Co.

Sunil Traders