Distempering Painting and minor repair of Directorate Office Building at Block No 10 SDA Complex Kasumpti Shimla

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete (Item No. 14.43 of DSR)

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare to prepare the suface even and smooth complete (Item No. 13.80 of DSR) 100% of total distempering area.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer (Item No. 13.43.1)

Distempering with oil bound washable distemper of Asian Paint Aspira or Equivalent to give an even shed (item No. A of rate analysis) Two or more coats on new work

ainting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (Item No. 14.54 of DSR) Two coats on old work

Finishing walls with Acrylic Smooth Exterior paint of required shade (Two or more coat applied@ 1.67ltr/10 sqm over and including priming coat of exterior primer applied 2.20kg/10 sqm) (Item No. 13.46.1 of DSR)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty (Item No. 14.5 of DSR) - Float glass panes of thickness 4 mm

Varnishing with varnish of approved brand and manufacture (Item No. 14.69 of DSR) One or more coats with spar varnish

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) (Item No. 9.1 of DSR) Teak wood second class

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge (Item No. 9.5 of DSR) Second class teak wood - 35 mm Thick

Applying priming coat (Item No. 13.50 of DSR) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.(Item No. 12.52.2)

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, withnecessary fixing arrangement and screws etc. complete : 18 mm thick (Item No. 9.35.2)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) (Item No. 21.1)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall bepaid in basic item): With float glass panes of 5.50 mm thickness (Item No. 21.3.2)

Oxidised mild steel sliding door bolt 300x16 mm

Anodised Aluminium tower bolt (barrel type) 200x10 mm (700)

Anodised Aluminium handles 100 mm with plate 150 x 32 mm (704)

PTMT - handle 150x34x24 mm (7513)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc. as required. Group B (1.3.2)

Light for false ceiling

Providing potted plants "crown top plastic made with plant height 2 ft. with plants Araucaria, Areca, Phoenix, Chemidora, Wasigtonia, Xanadu, Sellum and Nolina.

Providing and fixing of Roller blinds (Blackout type) on the windows at all heights, all materials and labour etc., complete in all respects as per directions of Engineer having following specifications:- Providing & fixing roller blinds in the windows, having following specifications: (i) Composition: 100% Polyster (ii) Width -200 Cm or as per equal divisions of total length.of the window (iii) Thickness -0.40 mm (iv) Weight -390 gm/m2 approx. (v) Degree of opacity- 100% (vi) Light Fastness- 4/6 Material & colour shade shall match with the sample available with NIB. Make : M/s MAC /M/s Vista Levlor/M/s Hunter Doglus, M/s Max or equivalent

Girish Gupta