PROVN OF SECURITY LIGHTS AND WIRING AROUND PERIMETER FENCE AND TECH AREA AND SPECIAL REPAIRS/ REPLACEMENT OF UG CABLES, PANELS AND ALLIED WORKS OF OFFRS LIVING ACCN AT LIKABALI MIL STN UNDER GE 872 EWS

Amount

Disconnecting & Taking down/out unserviceable LT Cable of any size and any description from Trenches, Floors, Walls, GI Pipes, etc. incuding Serviceable (if any) Cables, Bricks/Cable Protection Cover, etc. keep in Safe Custody for re-use, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for Laying of Cable, Electric Pole, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps along the Route of the Cable Line with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ordered, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) in Copping of Electric Poles, etc., weathering slightly rounded or chamfered angle and throating, finishing all Exposed Faces of Concrete including necessary Formwork, complete all as specified and as directed.

M&L Steel Tubular Swaged Pole 3.0 Metre long, complete with Mild Steel Base Plate, Finial Taper Plug, Bolts, Nuts & Screws, etc. Painting with Two Coats Aluminium Paint over a Coat of Red Oxide Zinc Chrome Primer, providing 3 No. Band/ Strap with Paint Black/ Yellow Colour 300mm apart from Plinth Block and Writing Numbers (50mm in Height) of Pole and Painting embedded portion of Pole with One coat of Bituminous Paint, complete all as specified and as directed. NOTE : Necessary Earth Work & Cement Concrete will be Measured and Paid separately under relevent Items.

M&L Steel Tubular Swaged Pole 4.0 Metre long, complete with Mild Steel Base Plate, Finial Taper Plug, Bolts, Nuts & Screws, etc. Painting with Two Coats Aluminium Paint over a Coat of Red Oxide Zinc Chrome Primer, providing 3 No. Band/ Strap with Paint Black/ Yellow Colour 300mm apart from Plinth Block and Writing Numbers (50mm in Height) of Pole and Painting embedded portion of Pole with One coat of Bituminous Paint, complete all as specified and as directed. NOTE : Necessary Earth Work & Cement Concrete will be Measured and Paid separately under relevent Items.

M&L Street Light Fitting Bracket made out from GI Pipe 32mm Bore (dia), Light Grade, 1.50 Metre long, bend to required shape and fixing to Poles, etc. with and including Mild Steel Flat Iron Clamps 40x5mm of suitable Length, 2 No. Nuts, Bolts, Washers, etc. including Painting with One coat of Red Oxide Zinc Chrome Primer and Two coats of Aluminium Paint to all Mild Steel Works, complete all as specified and as directed.

S&F LED Street Light Fitting 48 Watt, New Generation, Energy Saving and Environmental Friendly, Long Life, LED Street Light made up of Pressure Die-cast Aluminium Housing with High Power LEDs as Lighting Source and Lens embeded PC Cover having Top Opening, with separate Driver Compartment, IP-66 protection, Impact Resistance of IK-07 and providing necessary Electric Connections with and including suitable size Twisted Copper Conductor Cable, complete all as specified and as directed. MAKE : HAVELS, Cat No. RAPEARLNEOSL48WLED757SASYTOPC or equivalent in Make : BAJAJ/ CG/ C&S/ PHILIPS (as approved by GE)

S&F FRP Looping Cable Junction Box of size 225x295x122mm, IP66/67, Weather Proof, for Outdoor installation (with Knockouts for Cable Entry), suitable for LT XLPE armoured Cable 16/35 Sqmm including suitable size 2 No. Flat Iron Clamps with Bolts, Nuts & Washers, etc. and duly painted with Two Coats of Synthetic Enemel Paint over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. MAKE : HENSEL/ SCHNEIDER/ SINTEX/ UNIVERSAL SWITCH GEARS CONTROL

M&L Sub-main Wiring with 2-Runs of 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable and 1-Run of 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc., complete all as specified and as directed. NOTE :- (a) Cost of 3-Runs of Cables & 1-Run of PVC Casing Capping shall deem to be include in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Conduit only. Wires required for looping, etc. as ordered will deem to be include in the Quoted Unit Rate.

Supply & Laying/Fixing XLPE insulated, armoured heavy duty Electric Cable with Aluminium Conductor Multi Stranded, 1100 Volt grade, Cross sectional area 10 Sqmm 2 Core including necessary Aluminium Thimbles, laid in Trenches/ Ducts or Passing through Pipes or Fixing on Poles, Walls, etc., complete all as specified and as directed. NOTE : Necessary Earth works, Sand cushioning, Bricks, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

Supply & Laying/Fixing XLPE insulated, armoured heavy duty Electric Cable with Aluminium Conductor Multi Stranded, 1100 Volt grade, Cross sectional area 35 Sqmm 3½ Core including necessary Aluminium Thimbles, laid in Trenches/ Ducts or Passing through Pipes or Fixing on Poles, Walls, etc., complete all as specified and as directed. NOTE : Necessary Earth works, Sand cushioning, Bricks, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

Supply & Laying/Fixing XLPE insulated, armoured heavy duty Electric Cable with Aluminium Conductor Multi Stranded, 1100 Volt grade, Cross sectional area 50 Sqmm 3½ Core including necessary Aluminium Thimbles, laid in Trenches/ Ducts or Passing through Pipes or Fixing on Poles, Walls, etc., complete all as specified and as directed. NOTE : Necessary Earth works, Sand cushioning, Bricks, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

Supply & Laying/Fixing XLPE insulated, armoured heavy duty Electric Cable with Aluminium Conductor Multi Stranded, 1100 Volt grade, Cross sectional area 70 Sqmm 3½ Core including necessary Aluminium Thimbles, laid in Trenches/ Ducts or Passing through Pipes or Fixing on Poles, Walls, etc., complete all as specified and as directed. NOTE : Necessary Earth works, Sand cushioning, Bricks, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

Supply & Laying/Fixing XLPE insulated, armoured heavy duty Electric Cable with Aluminium Conductor Multi Stranded, 1100 Volt grade, Cross sectional area 95 Sqmm 3½ Core including necessary Aluminium Thimbles, laid in Trenches/ Ducts or Passing through Pipes or Fixing on Poles, Walls, etc., complete all as specified and as directed. NOTE : Necessary Earth works, Sand cushioning, Bricks, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured.

Supply & laying in Trenches Sub-class ‘B’ Brick of size 230x115x75mm, well kiln burnt, for Cable Protection and covering with Width equal to Length of Brick, laid dry Flat, complete all as specified and as directed.

M&L Galvanised Steel Tubing Pipe 50mm bore (dia), 'light grade' with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.

M&L UG Cable Route Indicator made out of Mild Steel Round Bars 20mm dia 500mm long as Legs welded with Mild Steel Plate 6.0mm thick of size 100mm dia for writing LT and Name of Feeder embeded with and including Cement Concrete 1:2:4 (20mm graded stone aggregate) Block of size 15x15x30 Cm and grouting on the Route of the Cable including necessary Earthworks, complete all as specified and as directed.

M&L Feeder Pillar Box Outdoor type, Double Door, made out of 14 SWG CRCA Sheet, Powder Coated, Weather Proof, Front Opening Shutter with proper Locking Arrangements, mounting on 4 No. Mild Steel Angle Iron Leg of size 40x40x6.0mm and grouting in Cement Concrete 1:2:4 (20mm graded stone aggregate) Work of suitable size including necessary Electric Connections and Testing, Comprising with the followings including Taking down unserviceable Panel/ Feeder Pillar Box, complete all as specified and as directed:- (a) Aluminium Bus-bar 4 Strip, 100 Amp, 430 Volt - 01 Set (b) MCB 63 Amp, SPN, 36 kA, 430 Volt - 10 No. (c) MCCB 63 Amp, 4 Pole, 36 kA, 430 Volt - 01 No.

M&L Feeder Pillar Box Outdoor type, Double Door, made out of 14 SWG CRCA Sheet, Powder Coated, Weather Proof, Front Opening Shutter with proper Locking Arrangements, mounting on 4 No. Mild Steel Angle Iron Leg of size 40x40x6.0mm and grouting in Cement Concrete 1:2:4 (20mm graded stone aggregate) Work of suitable size including necessary Electric Connections and Testing, Comprising with the followings including Taking down unserviceable Panel/ Feeder Pillar Box, complete all as specified and as directed:- (a) Aluminium Bus-bar 4 Strip, 100 Amp, 430 Volt - 01 Set (b) MCCB 63 Amp, 4 Pole, 36 kA, 430 Volt - 04 No. (as Outgoing) (c) MCCB 63 Amp, 4 Pole, 36 kA, 430 Volt - 01 No. (as Incommer) (d) Change Over Switch 63 Amp, 4 Pole, Front Operated - 02 No.

M&L Feeder Pillar Box Outdoor type, Double Door, made out of 14 SWG CRCA Sheet, Powder Coated, Weather Proof, Front Opening Shutter with proper Locking Arrangements, mounting on 4 No. Mild Steel Angle Iron Leg of size 40x40x6.0mm and grouting in Cement Concrete 1:2:4 (20mm graded stone aggregate) Work of suitable size including necessary Electric Connections and Testing, Comprising with the followings including Taking down unserviceable Panel/ Feeder Pillar Box, complete all as specified and as directed:- (a) Aluminium Bus-bar 4 Strip, 250 Amp, 415 Volt - 01 Set (b) MCCB 63 Amp, 4 Pole, 36 kA, 430 Volt - 12 No. (as Outgoing) (c) MCCB 160 Amp, 4 Pole, 36 kA, 430 Volt - 01 No. (d) Change Over Switch 160 Amp, 4 Pole, Front Operated - 02 No.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion, complete all as per specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Galvanised Earth Strip of size 32x6.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including Taking Taking down/out Unserviceable Earthing, complete all as per specified and as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.

M/S KESHAVECONSTRUCTIONS

M/S JANATACONSTRUCTION

kabitaconstruction

ms singh construction