Const of Slop Earthen Gallery at Medhaghat under Baksa under SYW for the Financial Year 2024-25.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.8: 1:4:8 (1 cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

FORM WORK : Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1 : Foundations, footings, bases of columns, etc. for mass concrete

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position machine batched and machine mixed design mix M-25 grade CC for RCC work, using CC as per approved design mix, including pumping of conc. to site of laying ..without impairing strength and durability as per derection of Engineer-in-charge. 5.33.1 All works upto plinth level.

Providing and laying in position machine batched and machine mixed design mix M-25 grade CC for RCC work, using CC as per approved design mix, including pumping of conc. to site of laying ..without impairing strength and durability as per derection of Engineer-in-charge. 5.33.1 All works above plinth level upto floor V level.

Brick work with common burnt clay F.P.S. ( non- modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V leve in all shapes and sizes in 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc., as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, grates and similar works.

13.2: 15 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.2: 1:6 (1 cement: 6 fine sand)

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.48A: New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc., in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5 m.

Cost of Signboard

Ramen Ramchiary (BID ID -255714)