e-NIT No.28 / EnM (WEST)/ 2019-20, Item No.08

Excavation of Earth, approx 10' X 2' X 3' Deep dismantling of rusted demage suction line . Dismantling of Demage rusted M.S. suction line with the help of Gas cutter, electric-welding set. Job i/c refitting of New M.S. pipe, flange, M.S. Taper, Replacement of sluice valve, rubber packing, nut bolt etc. by the electric welding set, gas cutter, with the help of manual labour, Re-filling & levelling of Earth.

S/O M.S Black Pipe, Conforming to IS :3589 Gr 330 of 4.85 mm thick 200 mm dia Make:- Jindal/TATA

Supply of M.S. Flange 200 mm dia 15 mm thickness.

Supply of 200 mm dia thickness 8 mm 90 degree double flange bend.

Dismantling of suction pipeline , sluice value, non return value, joint bend, with the help of heavy man power ,chain pulley ,block, welding set, gas cutter as per site requirement.

Supply of 150 mm dia X 200 mm dia thickness 8 mm D/F M.S. Concentric Taper (both sides Flanges) Length:- (as per site Requirement)

P/F of M.S. coupling Guard for 50 H.P. Pumpset

Breaking the R.C.C foundation by hammer chiesel Electric compressor machine.

Making of R.C.C foundation by 1:2:4 cement concrete, M.S. jal. providing and fixing of Foundation bolts as per site .

Breaking & Making of R.C.C. wall for laying of suction line in the UGR by heavy labour or suitable machine as per site requirement.

Making and supply of M.S. channel base frame suitable for 50 H.P. motor and pump size.

Supply of C.I D/F non rising spindle sluice value PN :1.0, IS:14846,CI body / wedge / bronze- ring / ss 410 shaft- construction & SS IS:6603 Gr 12 Cr 12 of size 200 mm dia Make:- kirloskar / Ivc.

Supply of C.I D/F swing type non return value as per IS:5312(Part 1&2) PN1.0 CI body, door/Bronze to rubber rings/SS 410 Hinge pin construction of size 200mm dia Make:- kirloskor / Ivc

Supply of CI Foot Valve flange type of size 200 mm dia Make:- Kirloskar/IVC

Supply of M.S. Nut bolts and washer of different sizes as per site requirements.

Supply of Neoprene Rubber packing sheet.

Painting of all the pipe line, pump and motor etc at site as per requirement.

Fitting of delivery pipe line and sluice valve & NRV with proper-alignment ,connection the motor from panel to starter replacement of pipe line ,flange , nut bolts , washer . the job include all tools and tackles, loading and unloading , safety equipments and other precautions etc. i/c Testing and commissioning of load and unload to complete satisfaction of Engineer In- Charge.

Mehar Enterprises

M/S.SUPER TRADERS & ENGINEERS