Construction of Retaining Wall and Road at Simbor in Diu District.

Amount

Civil Works

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm.depth including stacking useful materials on road side and disposing off remaining stuff.

Excavation for foundation in sand, gravel, clay soft soils and murrum etc. including shoring, strutting dewatering as necessary and disposing of the excavated stuff as directed.(A) Depth upto 3.0 M. and lead upto 100m for 10 Cum

Supplying and stacking of hard rubble stone for soling including conveyance etc.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- crushed stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (B) Walls, from top of foundation level upto floor two level

Providing formwork sheeting of steel sheets so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (C) Vertical surface such as walls (any thickness) partitions and the like including attached buttresses & string course & the like.

Rolling of earthwork in layers with power roller including filling in depressions which occur during the process.

Supplying and stacking of crushed stone aggregates of following monimal size free from disintegrated pieces, deleterious and organic matter and grading as per I.R.C. code for road work incl. conveyance, filling measuring boxes etc. complete. (IV) 40mm to 63mm

Spreading stone or stone aggregates for soling and W.B.M. including filling the interstices to required camber and gradient (excluding spreading of blind age).

Providing, supplying and stacking filling binding material murrum incl. spreading for soling and WBM covering, conveyance charges etc. complete as directed by Engineer-in-charge.

Rolling and consolidation of soling including filling in depression which occur during the process, with power roler 8 tonne to 12 tonne.

Rolling and consolidating water bound macadam (except laterite and Kankar) including watering not exceeding 150mm thickness (Main layer including binding materials ) including filling in depressions which occur during the process.(A) With power roller exceeding 8 tonne and not exceeding 12 tonne.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slops of I.S. 458 / 1971 Class NP3 casted by vertically vibrated technology of following internal diameter. (v) 900 mm dia.

Providing TMT Bar FE 500 reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level

Providing anticorrosive treatment to HYSD/ TMT/ CRS bars with FUSION BONDED EPOXY COATING (FBEC) confirming to IS 13620:1993 at approved plant including testing of coating as per relevent IS, before bringing the coated bars on site but including to & fro transportation of bars for sending at plant site etc. complete for HYSD bars (all dia)

Providing and laying Flamed finish machine cut Rajula stone of 22-25 mm thick stone slab/flooring/wall mounted with edge cutting in required sizes, design and patterns in linear as well as curvilinear portions all complete as per the architectural drawings over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with cement slurry admixed with pigment of matching shade including wastage, rubbing, cutting, curing and polishing etc all complete as specified and as directed by the Engineer-in-charge.

Providing 20mm thick cement plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement Mortar 1:3 (1- Cement : 3- Sand)

Finishing wall with weather proof exterior emulsion paint on wall surface (two cats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials etc. complete.

Providing weep holes in Brick masonry/ Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC Pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification.

Bahusmarna construction Pvt.Ltd.

Sarjan Structure