Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹14.7 Laccepted-aoc | ₹14.7 L | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹17,912
Closing Date
15 Jun 2026, 10:00 pmClosed
Rural Development and Panchayat Raj Department
RAGHUNATHA MURTHY B P
Construction of Additional Class Room at Govt High School Guluru village in Bagepalli Taluk
RDPR/2026-27/BD/WORK_INDENT27200
RDPR/2026-27/BD/WORK_INDENT27200
Reserved
Buildings
Electronic Documents, First(One Cover)
RDPR Division Office Chickballapura
₹500
₹17,912
15 Jun 2026
6 Jun 2026
12 Jun 2026
Constrcution of Additional Class Room at Govt High School Guluru village in Bagepalli Taluk
Earth work excavation by manual means for drains, canals, waste weir, draft,
approach channels, key trenches, foundation of Buildings & bridges and such
simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upt...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Add 8% centring charges for footing with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipment’s including all incidental charges as per detailed specifications ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Add 50% centring charges for Plinth beam with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipment’s including all incidental charges as per detailed specificati...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations
and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, sc...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) inc...
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Add 70% centring charges for column with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipment’s including all incidental charges as per detailed specifications ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Add 60% centring charges for Lintle Beam with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipment’s including all incidental charges as per detailed specificat...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Add 50% centring charges for Slab with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipment’s including all incidental charges as per detailed specifications et...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification. Building works Details of cost for 1t MATERIAL (TMT bars including 5 per cent o...
Providing & fixing plaster mesh 100 mm. wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35 mm. with a zinc coating of 120 gms. per sqm. width, along route of wals chip...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing and lying Polished glazed Vitrifide tiles in floor with difrent sizes (thickness to be Specified by the manufuctre) with water absorppion lessthen 0.08 % and confroming to IS:1562, of approv...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing White washing with lime to give an even shade :New work (three
coats) with lime of approved quality, including cost of materials, labour
with all lead, lift, loading, unloading, labour, fuel...
Finishing with Deluxe Multi surface paint system for interiors and exteriors
using Primer as per manufacturers specifications: Two coats applied on
walls @ 1.25 L/10 m² over and including one coat of...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Providing Cement mortar 1:3 (1 cement : 3 fine sand) including cost of all
materials, labour and usage charges of machinery with all lead, lift, loading, unloading, labour, fuel, hire charges of machi...
Providing & fixing locking Arrangements with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipment’s including all incidental charges as per detailed specification...
Providing & fixing pin board with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipment’s including all incidental charges as per detailed specifications etc., com...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Notification 8 10.pdf
Others - NOTIFICATION • 0.93 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .