Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.7 LAccepted-Finance | L1 | Accepted-Finance Rate Quoated Less than Estimate | |
| 2 | L2₹29.7 L+₹2,189.28 (0.07%)Rejected-Finance NOT SPECIFIED | L2 | Rejected-Finance Rate Quoated More than Estimate |
Tender Value
₹30.1 L
EMD Value
₹30,100
Closing Date
9 Mar 2024, 5:00 pmClosed
Block Development Officer(V.PT), Vembakkam
Block Development Office, Vembakkam
Execution of AGAMT II 2024-25 Construction of Panchayat Office Building at Vellakulam Panchayat Vembakkam Block
2024_RDTN_437807_1
1246/2024/A13-1
Open Tender
Civil Works - Others
Item Rate
90 days
Block Development Office, Vembakkam
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹30,100
Yes
12 Mar 2024
4 Mar 2024
9 Mar 2024
4 Mar 2024
9 Mar 2024
4 Mar 2024
Amount
Construction of Panchayat Office Building
Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation.
Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.
Cement concrete 1:2:4 mix usin 20 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete.,For Foundation
Supplying and filling with filling sand in layers not more than 15 cm thick ,well rammed, wattered and compacted etc,complete For Foundation
Supplying and Filling the U/S gravel from appd quarry including cost and conveyance and filling charges etc., as per std. Specification
Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc.
RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.
Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc.
Supply and erection of centring incl all necessary supports and strutting all cross bracings etc complete
Column Sunshade
Below Basement
Slab and Beam
Weathering Coarse with broken brick jelly for 20mm size mixed with pure slacked lime in propositin of 32:12:5 proper gradient
Terrace flooring with one coarse of pressed tiles of size 20x20x2 mm using CM 1:3 with water proofing compound 2% weight of cement used and the joints pointed with same
Ceramic tiles flooring with new ceramic tiles size 300x300x6mm laid in CM 1:3 including cost of white cement and labours charges etc
Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality
Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.
Plastering with CM 1:3, 10mm thickFinishing the exposed surface of RCC item of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with CM 1:3, 10mm thick. including raking the surface. The rate is to include the cost of providing cement mortar beading or nosing for sunshades & staircase steps, landing slabs etc., complete complying with standard specifications.
Fabrication and supply of Mild Steel Door of any required size with double leaf,outter frame of 35x35x 5mm equal MSL angle and shutter frame made of 25x25x5mm equal MSL angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 2Nos.horizontal and 3 Nos. diagonal for each shutter using M S flat of size 20x5mm fully covered with 18 gauge plain M S full sheet welded with shutter frame neatly and also fixin by welding 6 Nos. of hold fasts,2 Nos. wind appliances,3 Nos. tower bolts,1 No. aldrop2 Nos. handles, fixing shutterwith6 Nos.of hinges with outter frame of the door including painting the whole unit with one coat best quality of red oxide primer.
Dooor 1.10x2.10 m
Dooor 1.00x2.10 m
Toilet Door 1.20x2.10 m
Grill Gate1.5x2.10 m
Rolling Shutter
Fabrication and supply of Mild Steel Window of any required size with Three leaf.Outter frame of 35x35x 5mm equal MSL angle, Mullion section made of 35x 35x5mm equal T-section, shutter frame made of 25x25x5mm equal MSL angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 1No.horizontal for each shutter using M S flat of size 20x5mm fully covered with 18 gauge plain M S full sheet welded with shutter frame neatly and also fixin by welding.Protective grill with 12 mm squqre M S rods at an intervel of not grater than 10 cm centre to centre to the outter frame.2 Nos of peg stays with hole for keeping the windows open in different positions,2 Nos. of locking handles fixing the shutters with 4 Nos. of hinges hold fasts, 6 Nos.of hinges with outter frame of the window including painting the whole unit with one coat best quality of red oxide primer.
Window 1.20x1.30 m
Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )
Painting two coats with approved Plastic Emulsion paint over one coat of Primaring coat over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers. (S.I No. 359 B)
Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete
Labour charges for fixing of Steel Door including all labour charges etc. complete.
Labour charges for fixing of Steel Window including all labour charges etc. complete.
Supply and Fixing of IWC
Supply and Fixing of EWC
Wash basin
Labour charges for fixing of Cudapah slab, Water closet with "P" trap, PVC Pipes, Jolly 0.60 x 0.45m, Precast slab for Manhole cover etc. complete.
Supply and fixing of Rain water PVC pipe of 110mm dia
PVC concealed Light point / fan point
concealed PVC plug point SD 36
Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 65
Supply and run of 2 X 4 sq.mm (56 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 69
Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110
Supply and fixing of single box type 4' 40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads fron terminals to the fitting. SD 88
Supply and Fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit on TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD125
Supply and fixing of WT bulk head fitting with guard for 11W CFL SD 83
Water Supply
25mm PVC pipe
25mm PVC Elbow
25mm PVC Coupling
32mm PVC Pipe
63mm PVC pipe
63mm PVC Elbow
63mm Bend
25mm GM Gate valve
Earth work excavation in Hard stiff gravely soil for narrow foundation with initial lead and lift as per SS 20 B,etc complete
Towards Labour Charges for Laying of Pvc Pipes and specials including all labour charges etc complete.
Refilling the excavated earth to the Pipe line trench including all labour charges etc complete.
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
JCK Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .