WBPWD/EE/ HED / NIeT-113 of 2024-25

Amount

Errection & Repairing of Trident light pole approx. 5.12 Mtr long made of 80mm. Dia. G.I. pipe (Jindal/Bansal make) medium gauge along with two nos. extended bend arms (40mm) each length approx. 1.33 mts including fixing of 3 nos Post Top garden light LED fittings.The pole has slot cutting for provision of cable entry with bakelite sheet & 15A fuse unit (one no.). Erection of pole will be in CC foundation having 460mm x 460mm x 900mm depth of 1:3:6 cement concreat with hard Jhama metal including muffing of 300mm x 300mm x 300mm painting the pole with two coats of Al. paint (Barjar/Shalimar)over one coat of red oxide and including earthing by 600mm long 60mm dia and 5mm thick at a depth of 3 mtr below ground level which will be connected with the pole by 7/14 SWG GI wire with two sets both of double washer and nuts (3"x1/2") with GI pipe and 1"x 1/2" with pole. The wiring inside the pole is to be done by 2x1.5sqmm Pvc insulated,FR, Cu. wire through suitable dia polethene pipe.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the 19mm/25mm prelaid polythene pipe/PVC rigid conduit as per GS.

3 x (1.5 sqmm) [1(b) / E- 9 ]

4x(6 sqmm)+2x(4 sqmm) [1(a1)/E-9]

S & F solderless Copper socket by crimping of Copper wires.

4 sqmm [9(ii)/F-5]

6 sqmm [9(iii)/F-5]

Supply and fixing of Post-Top light fittings for Trident Pole including 9W LED lamp as per direction of EIC. (Make - Diamond or equivalent make/model of Bajaj/ Wipro/ Philips/ CG/ Havells)

Fixing only pendent light fitting complete with lamp, shade and 24/0.2 mm (1.5 sqmm) flexible copper wire incl. S&F pendent holder[12/C-2]

Supply and fixing 9 W LED bulb (Philips/Bajaj/CG/Wipro) in place of damaged lamp in existing light fittings on Trident Pole.

Supplying and fixing of Analogue timer AUTS03ANA00 (make-L&T)along with all accessories

Supplying & Fixing of 32Amp 4 Pole power contactor (Make- L&T, Cat No.- CS97011) as per direction of EIC. [NS]

Supplying and fixing 415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make-Legrand/ Schneider/Siemens/Crabtree/L&T) as per direction of EIC. ]

Supplying and fixing of 415V 4 pole 63 Amp. Terminal. (Approved make)along with all accessories

Supply and fixing of 415V, Porcelain Kit Kat Fuse unit of following current rating.

Supplying and fixing 415V, 100A,TPN SFU (Make-L&T/Havells) with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.[4(a)/D-3]

Supply & fixing 150 W LED flood-light fittings with IP66 protection along with all accessories (Make-Crompton Cat No. LFLN-150-CDL/60-M or quivalent model of Philips/Havells/Wipro/CG/Bajaj)

Lowering down & lifting up work of existing High Mast Tower light fitting for repairing work & lifting up after necessary repairing of existing damaged/non-functional flood light fitting after arranging necessary items like chain,small generator(in case of power failure) etc

Repairing of 150 W LED flood light fittings along with all accessories as per direction of E.I.C

Supply & fixing Driver for LED flood light fittings of 200 watt along with all accessories (Make - Philips/Bajaj/Wipro/CG)

Supply of 240V 60 W LED flood light luminarie complete with all accessories and equipped with IP66 Protection (Crompton Geaves-Cat no. TFS-504-60-57-60D-SL-GL-NSG or equivalent make of Philips/Bajaj//wipro) as per direction of E.I.C

Supply of 240V 20 W LED flood light luminarie complete with all accessories and equipped with IP65 Protection (Philips-Cat no.BVP101 LED20 CW FG GR PSU or equivalent make of Crompton Greaves/Bajaj//wipro) as per direction of E.I.C

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required. [20(b)/C-3]

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. (200 x 150 x 100mm )[H(5)/H-5]

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works

20 mm size [ 7(a)/ E- 16 ]

Greasing of Wire rope of High mast

Repairing of Feeder Pillar Boxes specially the repairing of doors and other necessary parts.

S & F of GI loop box cover incl. cutting and welding properly for trident poles necessary parts.

Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make--Gloster/KEI/Polycab/Havells]

4 Core 10 Sqmm

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [1(a)/F2]

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish

From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc. [5(i)/F3]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : [7(C)/F4]

4 Core 10 sqmm Cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

4 core 10 sq. mm cable [F5-8(b)-xi]

4Core 16 Sq. mm [F5-8(b)-xii]

Straigh through Jointing of cable of different size by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC)

4 core 10-16 sqmm cable [10(iv) / F-6]

Supplying & Fixing medium gauge GI pipe (ISI-medium) for cable protection with necessary fittings and jointing metarials as required

40 mm dia [11(c)/F-6]

50 mm dia [11(c)/F-6]

25mm dia [11(c)/F-6]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS [ 2(a)/G-1]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [3(a)/G-2]

Excavation of soil for installation of Earth Electrode and filling & ramming for Morrum Soil. [1(b)/G-1]

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS

No.-4 SWG [5(a)(i)/G-2]

Maintenance and operation of compound illumination by deputing 1 no. skilled Electrician and 1 no. unskilled labour (Helper) per shift for 3 shifts per day

Add GST 18 %

Add Labour Cess 1%

S B R ELECTRICAL ENTERPRISE (BID ID -6114895)

R.D.ELECTRICAL ENGINEERING CO (BID ID -6130585)

SEKHAR CHANDA (BID ID -6138198)

RAKSHIT CONSTRUCTION (BID ID -6138581)

SHATABDI ENGINEERING AND CONSULTANCY (BID ID -6134589)