REPAIR REPLACEMENT AND MAINTENANCE OF WATER SUPPLY DISTRIBUTION SYSTEM AND OTHER CONNECTED WORKS AT SECTOR B UNDER AGE EM II OF GE 865 EWS

Taking up or down old unserviceable tubing of 20mm dia of any discription complete all as specified and directed. ( Excavation and earthwork measured and paid separately).

Taking up or down old unserviceable tubing of 25 to 32mm dia of any discription complete all as specified and directed. ( Excavation and earthwork measured and paid separately).

Taking up or down old unserviceable tubing of 40 to 50mm dia of any discription complete all as specified and directed. ( Excavation and earthwork measured and paid separately).

Taking up or down old unserviceable tubing of 63 to 150mm dia of any discription complete all as specified and directed. ( Excavation and earthwork measured and paid separately).

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as directed

Removing excavated material outside MD land n.exc 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point in soil complete all as directed.

Returning, filling in including spreading leveling watering and well ramming in layers not exceeding 25cm complete all as directed

S&F in replacement for GI tubing 150mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge.

S&F in replacement for GI tubing 100mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge.

S&F in replacement for GI tubing 80mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge.

S&F in replacement for GI tubing 50mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge.

S&F in replacement for GI tubing 40mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge.

S&F in replacement for GI tubing 25mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge.

S&F in replacement for GI tubing 20mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge.

S&F in replacement gun metal, globe or gate valve ISI marked cast with ironwheel head, screwed both ends for iron pipe and fixed for 50 mm dia bore complete all as specified & directed by Engr-in-Charge.

S&F in replacement gun metal, globe or gate valve ISI marked cast with ironwheel head, screwed both ends for iron pipe and fixed for 40 mm dia bore complete all as specified & directed by Engr-in-Charge.

S&F in replacement gun metal, globe or gate valve ISI marked cast with ironwheel head, screwed both ends for iron pipe and fixed for 25 mm dia bore complete all as specified & directed by Engr-in-Charge.

S&F in replacement gun metal, globe or gate valve ISI marked cast with ironwheel head, screwed both ends for iron pipe and fixed for 20 mm dia bore complete all as specified & directed by Engr-in-Charge.

Cutting of existing 150mm bore, CI/ GI pipes and reducing to required length before laying in position for insertion of new tees, branches etc complete all as specified & directed. Forfollowing size :- Note Ftting shall be measured and paid for separately under respective item

Cutting of existing 100mm bore, CI/ GI pipes and reducing to required length before laying in position for insertion of new tees, branches etc complete all as specified & directed. Forfollowing size :- Note Ftting shall be measured and paid for separately under respective item

Cutting of existing 80mm bore, CI/ GI pipes and reducing to required length before laying in position for insertion of new tees, branches etc complete all as specified & directed. Forfollowing size :- Note Ftting shall be measured and paid for separately under respective item

M & L Ductile iron pipes 100 mm bore with spigot and socket ends, centrifugally cast (spun) class K9, in any length, externally coated with metallic zinc Coating finished with bituminious paint complete all as specified. Note :- Excavation, earthwork and GI clamps shall be measured and paid separately)

M & L DI/ CI/ GI specials class B as per IS such as bends,tee, flange, tappers any branches cross all sockets and spigot collar caps and plug etc up to 150mm bore all as specified and as directed

M & L cement concrete type B-1 1:2:4 (20mm graded crushed stone aggregate) as in door cills, path and plinth protection (of any section) including chambers, weathering, throating etc and setting in motar complete all as specified and directed.

M & L for run lead joint CI Spigot socket end and CI special fitting caulks, spun yarn and lead complete for 150mm bore size, all as specified and directed

M & L for run lead joint CI Spigot socket end and CI special fitting caulks, spun yarn and lead complete for 100mm bore size, all as specified and directed

Dismantling the existing 150mm bore, rubber/fiberboard gasket flanged joint and replacing it with New joint including nuts, bolts and washer of appropirate size complete all as required at site and directed by Engr-in-charge

Dismantling the existing 100mm bore, rubber/fiberboard gasket flanged joint and replacing it with New joint including nuts, bolts and washer of appropirate size complete all as required at site and directed by Engr-in-charge

Dismantling the existing 80mm bore, rubber/fiberboard gasket flanged joint and replacing it with New joint including nuts, bolts and washer of appropirate size complete all as required at site and directed by Engr-in-charge

S & F for 150mm bore, Gun metal/ stainless steel spindle and Nut for any make/ type of sluice valve spindlefixed in repair all as specified and directed.

S & F for 100mm bore, Gun metal/ stainless steel spindle and Nut for any make/ type of sluice valve spindlefixed in repair all as specified and directed.

S & F for 80mm bore, Gun metal/ stainless steel spindle and Nut for any make/ type of sluice valve spindlefixed in repair all as specified and directed.

S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 150mm nominal bore CI/GI pipe complete all as specified

S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 100mm nominal bore CI/GI pipe complete all as specified

S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 80mm nominal bore CI/GI pipe complete all as specified

S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 50mm nominal bore CI/GI pipe complete all as specified

S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 40mm nominal bore CI/GI pipe complete all as specified

Supply only galvanized fitting like TEE, Elbow, Socket, Union, Reduser, Nipple etc of suitable for existing GI tubing of size up to 100 mm for day to day maintenance preventing leakage if any of make new branch connection complete all as specified and directed

Supply only lead wool used for CI pipe/ fitting joint

MS work as in clamps, made to shape of flat iron of suitable size incl nuts, bolts, washers of appropriate size and painting with synthetic enamel paint in two coats over one coat of redoxide zinc chrome primercomplete all as specified.Note:- Cost of fixing clamps in walls/ RCC by cutting and grouting PCC is deemed to include in the rate quoted by tenderer.

S&F in replacement of PP-R pipes PN 20 / SDR 6, 3 layer 90 mm dia bore with all fittings conforming to IS-15801 and fixed complete to walls and ceiling or laid in floors or trenches complete all as specified & directed by Engr-in-Charge. Make Sant/SFMC or equivalent.

S&F in replacement of PP-R pipes PN 20 / SDR 6, 3 layer 63 mm dia bore with all fittings conforming to IS-15801 and fixed complete to walls and ceiling or laid in floors or trenches complete all as specified & directed by Engr-in-Charge. Make Sant/SFMC or equivalent.

S&F in replacement of PP-R pipes PN 20 / SDR 6, 3 layer 50 mm dia bore with all fittings conforming to IS-15801 and fixed complete to walls and ceiling or laid in floors or trenches complete all as specified & directed by Engr-in-Charge. Make Sant/SFMC or equivalent.

S&F in replacement of PP-R pipes PN 20 / SDR 6, 3 layer 40 mm dia bore with all fittings conforming to IS-15801 and fixed complete to walls and ceiling or laid in floors or trenches complete all as specified & directed by Engr-in-Charge. Make Sant/SFMC or equivalent.

S&F in replacement of PP-R pipes PN 20 / SDR 6, 3 layer 32 mm dia bore with all fittings conforming to IS-15801 and fixed complete to walls and ceiling or laid in floors or trenches complete all as specified & directed by Engr-in-Charge. Make Sant/SFMC or equivalent.

S&F in replacement of PP-R pipes PN 20 / SDR 6, 3 layer 25 mm dia bore with all fittings conforming to IS-15801 and fixed complete to walls and ceiling or laid in floors or trenches complete all as specified & directed by Engr-in-Charge. Make Sant/SFMC or equivalent.

S&F in replacement of gate valve 63mm dia screwed down high pressure with crutch or butter fly handle screwed both ends for PP-R pipes or for union and fixed completely as specified complete all as specified and directed by Engr-in-Charge.

S&F in replacement of gate valve 50mm dia screwed down high pressure with crutch or butter fly handle screwed both ends for PP-R pipes or for union and fixed completely as specified complete all as specified and directed by Engr-in-Charge.

S&F in replacement of gate valve 40mm dia screwed down high pressure with crutch or butter fly handle screwed both ends for PP-R pipes or for union and fixed completely as specified complete all as specified and directed by Engr-in-Charge.

S&F in replacement of gate valve 32mm dia screwed down high pressure with crutch or butter fly handle screwed both ends for PP-R pipes or for union and fixed completely as specified complete all as specified and directed by Engr-in-Charge.

S&F in replacement of gate valve 25mm dia screwed down high pressure with crutch or butter fly handle screwed both ends for PP-R pipes or for union and fixed completely as specified complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Elbow 25mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Elbow 32mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Elbow 40mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Elbow 50mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Elbow 63mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Socket 25mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Socket 32mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Socket 40mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Socket 50mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Socket 63mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Tee 25mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Tee 32mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Tee 40mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Tee 50mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR Tee 63mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR union 25mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR union 32mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR union 40mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR union 50mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR union 63mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR socket reducer 32-25mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR socket reducer 40-25mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR socket reducer 40-32mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR socket reducer 50-40mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR socket reducer 63-32mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PPR socket reducer 63-40mm dia incl taking out old one complete all as specified and directed by Engr-in-Charge.

Refixing of old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) of GI tubing of 40 to 50 mm dia and connections complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) of GI tubing of 25 to 32 mm dia and connections complete all as specified and directed.

S&F in replacement of cast iron sluice valve 150mm dia with CI drilled flanged ends class PN 1.6 confirming with IS incl stainless steel spindle and iron wheel including jointing material complete such as rubber packing rings of adequate size and requisite number of nuts bolts and washer complete all as specified and directed by Engr-in-Charge.

S&F in replacement of cast iron sluice valve 100mm dia with CI drilled flanged ends class PN 1.6 confirming with IS incl stainless steel spindle and iron wheel including jointing material complete such as rubber packing rings of adequate size and requisite number of nuts bolts and washer complete all as specified and directed by Engr-in-Charge.

S&F in replacement of cast iron sluice valve 80mm dia with CI drilled flanged ends class PN 1.6 confirming with IS incl stainless steel spindle and iron wheel including jointing material complete such as rubber packing rings of adequate size and requisite number of nuts bolts and washer complete all as specified and directed by Engr-in-Charge.

S&F in replacement of non return valve ISI marked flanged ends with by pass arrangements of size 150 mm dia bore complete all as specified and directed by Engr-in-Charge.

S&F in replacement of non return valve ISI marked flanged ends with by pass arrangements of size 100 mm dia bore complete all as specified and directed by Engr-in-Charge.

S&F in replacement of cast iron air release valve flanged type heavy duty grade single outlet air release valve 50mm bore and fixing upto 150mm dia CI/DI/GI pipe including suitable adopter, rubber hinged sheet, nut, bolt etc complete all as specified & directed by Engr-in- Charge.

Supply and fix foot valve ISI marked flanged ends with by pass arrangements of size 80 to 150mm dia bore complete all as specified and directed by Engr-in-Charge.

Supply fixing for ALTOCH-GP (calcium based granular disinfectant for water treatment more stable than chlorine gas and stronger than bleaching powder and sodium hypo chlorite) paking in 45 Kgs plastic drums all as specified and directed.

Labour for lifting of submersible pump and motor set of any capacity alongwith column pipe 50 to 100 mm dia, length approx 50 mtr after dismantling existing GI/ MS fittings of 50 to 100 mm bore from NRV and incl disconnecting and removal of submersible cable from starter making necessary repairs by opening and renewal of parts as required including transportation to market and back for repair complete all as directed for 5 HP to 52 HPCapacity pump set Note:- Part renewed shall be measured and paid separately at supplied only rates under appropriated items.

Supply only Gun metal impellers suitable for 5 HP to 52 HP Submersible Pump

Supply only Gun metal Bush suitable for 5 HP to 52 HP Submersible Pump

Supply only Gun metalStainless steel sleeves suitable for 5 HP to 52 HP Submersible Pump

Supply only 'C' type bushes for impeller suitable for 5 HP to 52 HP Submersible Pump

Supply only Bowel case suitable for 5 HP to 52 HP Submersible Pump

Supply only Stainless steel shaft of standard size complete in all respect suitable for 5 HP to 52 HP Submersible Pump

M&L for rewinding and servicing of submersible motor, electric driven 415 volt 50 Hz, 3 phase AC supply with Supper enameled copper wire of suitable/existing gauge, ISI marked, including connected works for rewinding. The scope of job includes dismantling, removal of old winding wire and other parts, cleaning of slots and reassembling complete of the following capacity of pump motors:- Note: The above rates are included the replacement of other parts like, steel ball, rotor shaft, rotor sleeves, thrust bearing block, stator tube, stator end ring, end lamination, upper housing, bearing, bearing bush, hook bolts, washers, counter thrust bearing, suitable nut bolts, adaptor and seal for shaft/mechanical seal etc if required for made fuctional of submersible motor.

52 HP/ 42 HP capacity motor

25 HP capacity motor

15 HP capacity motor

5HP capacity motor

M & L for taking down carefully electric motor upto 15 HP, 3 phase 415 V, 50 HZ, AC from foundtion/ coupling, removal of electric connection, opening the motor, cutting and removing the burnt windings, cleaning the stator and rotor with cleaning agent, rewinding the motor with appropriate gauge of super enamelled copper wire of approved make, insulating the winding with same class of insulation, incl replacment of taper roller bearing, ball roller bearing etc if required, supply and replacement of base foundation nuts and bolts and re-installing the motor and connecting to the pump, testing the motor for satisfactory performance complete all as directed by the Engineer-in-Charge. Note: The rates are included the Transportation/ minor/ major parts which are required to make a motor fuctional complete.

M & L for taking down carefully electric motor upto 30 HP, 3 phase 415 V, 50 HZ, AC from foundtion/ coupling, removal of electric connection, opening the motor, cutting and removing the burnt windings, cleaning the stator and rotor with cleaning agent, rewinding the motor with appropriate gauge of super enamelled copper wire of approved make, insulating the winding with same class of insulation, incl replacment of taper roller bearing, ball roller bearing etc if required, supply and replacement of base foundation nuts and bolts and re-installing the motor and connecting to the pump, testing the motor for satisfactory performance complete all as directed by the Engineer-in-Charge. Note: The rates are included the Transportation/ minor/ major parts which are required to make a motor fuctional complete.

M & L for taking down carefully electric motor upto 60 HP, 3 phase 415 V, 50 HZ, AC from foundtion/ coupling, removal of electric connection, opening the motor, cutting and removing the burnt windings, cleaning the stator and rotor with cleaning agent, rewinding the motor with appropriate gauge of super enamelled copper wire of approved make, insulating the winding with same class of insulation, incl replacment of taper roller bearing, ball roller bearing etc if required, supply and replacement of base foundation nuts and bolts and re-installing the motor and connecting to the pump, testing the motor for satisfactory performance complete all as directed by the Engineer-in-Charge. Note: The rates are included the Transportation/ minor/ major parts which are required to make a motor fuctional complete.

Dismantling carefully centrifugal multistage pump set of any make , capacity 30000 GPH, head 180 mtr and size complete without damaging any part of the pump and setting aside in pump house for ascertaining the serviceabilityof existing parts with the following :- (a) Through dismantling and cleaning of complete bowl assembly items such as CI bowls, impeller, lock collets, bowl bush, suction and discharge case with GM bush including pump shaft (b) re-assembling the complete bowl assembly pump with all existing serviceable parts and renew the worn out unserviceable parts including S & F gasket, lathe work and balancing of assembly others small nature of indispensable items as required for repairing. Note :- parts renewed shall be measured and paid for separately under respective items of schedule 'A' /BOQ at supplied only rates. Cost of labour for fixing of new parts shall be deemed to include transportation to market and back for repair complete all as directed in the rate quoted by tenderer.

Supply only Coupling Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Thest bearing / ball bearing Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Bearing Housing Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Packing gland cover Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Suction casing Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Fist state Brass Impellar Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Diffuser Sleeve Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Brass Impeller Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Wear ring Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Rear Diffuser Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Discharge casing Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Balance ring Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Rear Cover Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Shaft Sleeve Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Shaft Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Sliding Bearing Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Mechanical seal / packing seal Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Supply only Balance disk Suitable for (105 BHP Pump) 10000GPH, Head 180 Mtr

Dismantling carefully centrifugal multistage pump set of any make , capacity suitable for 50/60 HP, 180 Mtr head and size complete without damaging any part of the pump and setting aside in pump house for ascertaining the serviceabilityof existing parts with the following :- (a) Through dismantling and cleaning of complete bowl assembly items such as CI bowls, impeller, lock collets, bowl bush, suction and discharge case with GM bush including pump shaft (b) re-assembling the complete bowl assembly pump with all existing serviceable parts and renew the worn out unserviceable parts including S & F gasket, lathe work and balancing of assembly others small nature of indispensable items as required for repairing. Note :- parts renewed shall be measured and paid for separately under respective items of schedule 'A' /BOQ at supplied only rates. Cost of labour for fixing of new parts shall be deemed to include transportation to market and back for repair complete all as directed in the rate quoted by tenderer.

Supply only Coupling Suitable for 50/60 HP pump, head 180 Mtr

Supply only Thest bearing / ball bearing Suitable for 50/60 HP pump, head 180 Mtr

Supply only Bearing Housing Suitable for 50/60 HP pump, head 180 Mtr

Supply only Packing gland cover Suitable for 50/60 HP pump, head 180 Mtr

Supply only Suction casing Suitable for 50/60 HP pump, head 180 Mtr

Supply only Fist state Brass Impellar Suitable for 50/60 HP pump, head 180 Mtr

Supply only Diffuser Sleeve Suitable for 50/60 HP pump, head 180 Mtr

Supply only Brass Impeller Suitable for 50/60 HP pump, head 180 Mtr

Supply only Wear ring Suitable for 50/60 HP pump, head 180 Mtr

Supply only Rear Diffuser Suitable for 50/60 HP pump, head 180 Mtr

Supply only Discharge casing Suitable for 50/60 HP pump, head 180 Mtr

Supply only Balance ring Suitable for 50/60 HP pump, head 180 Mtr

Supply only Rear Cover Suitable for 50/60 HP pump, head 180 Mtr

Supply only Shaft Sleeve Suitable for 50/60 HP pump, head 180 Mtr

Supply only Shaft Suitable for 50/60 HP pump, head 180 Mtr

Supply only Sliding Bearing Suitable for 50/60 HP pump, head 180 Mtr

Supply only Mechanical seal / packing seal Suitable for 50/60 HP pump, head 180 Mtr

Supply only Balance disk Suitable for 50/60 HP pump, head 180 Mtr

Dismantling carefully centrifugal multistage pump set of any make , capacity suitable for 15/25 HP, 152 Mtr head and size complete without damaging any part of the pump and setting aside in pump house for ascertaining the serviceabilityof existing parts with the following :- (a) Through dismantling and cleaning of complete bowl assembly items such as CI bowls, impeller, lock collets, bowl bush, suction and discharge case with GM bush including pump shaft (b) re-assembling the complete bowl assembly pump with all existing serviceable parts and renew the worn out unserviceable parts including S & F gasket, lathe work and balancing of assembly others small nature of indispensable items as required for repairing. Note :- parts renewed shall be measured and paid for separately under respective items of schedule 'A' /BOQ at supplied only rates. Cost of labour for fixing of new parts shall be deemed to include transportation to market and back for repair complete all as directed in the rate quoted by tenderer.

Supply only Coupling Suitable for 15/25 HP pump, head 152 Mtr

Supply only Thest bearing / ball bearing Suitable for 15/25 HP pump, head 152 Mtr

Supply only Bearing Housing Suitable for 15/25 HP pump, head 152 Mtr

Supply only Packing gland cover Suitable for 15/25 HP pump, head 152 Mtr

Supply only Suction casing Suitable for 15/25 HP pump, head 152 Mtr

Supply only Fist state Impellar Suitable for 15/25 HP pump, head 152 Mtr

Supply only Diffuser Sleeve Suitable for 15/25 HP pump, head 152 Mtr80 Mtr

Supply only Impeller Suitable for 15/25 HP pump, head 152 Mtr

Supply only Wear ring Suitable for 15/25 HP pump, head 152 Mtr

Supply only Rear Diffuser Suitable for 15/25 HP pump, head 152 Mtr

Supply only Discharge casing Suitable for 15/25 HP pump, head 152 Mtr

Supply only Balance ring Suitable for 15/25 HP pump, head 152 Mtr

Supply only Rear Cover Suitable for 15/25 HP pump, head 152 Mtr

Supply only Shaft Sleeve Suitable for 15/25 HP pump, head 152 Mtr

Supply only Shaft Suitable for 15/25 HP pump, head 152 Mtr

Supply only Sliding Bearing Suitable for 15/25 HP pump, head 152 Mtr

Supply only Mechanical seal / packing seal Suitable for 15/25 HP pump, head 152 Mtr

Supply only Balance disk Suitable for 15/25 HP pump, head 152 Mtr

Material and labour for construction of stone masonary valve pit size 105x105x120 cm (internal dimension) built in cement mortal 1:4 incl plastering 20mm thick internally and externally in CM 1:4 PCC 1:4:8 TYPE D-2 15 Cm thick in foundation extending 10cm beyound external faces of wall around PCC flooring 1:2:4 type B-1, 40mm thick cover made out of 3.15mm thick MS round bar and locking arrangement with lock 2 keys . MS sheet cover should be painted with two caats of enamelled paint over a coat of red oxide primer all as specified and directed by Engr-in-Charge.

Cleaning of under ground sump of 50000Gln to 100000Gln capacity by scrubbing before commencing the water supply in the season and painting the same with white colour of two coats upto the ceiling of the sump all as directed by Engr-in-Charge.

Cleaning of MS water tank of capacity upto 22000Gln by scrubbing the outer and inner surface and removing the sludge from the tank before commencing the water supply in the season and painting the same with one coat of red-oxide primer on inner surface of tank and and two coats of black bituminous paint on inner surface and one coat on outter surface all as directed by Engr-in-Charge.

Supply, fixing, Testing and commissioning 0.5 HP single phase self priming booster pump with Automatic Analogue controller, suitable for incoming and out going 25mm dia pipe complete all as directed by Engr -in- charge.

Supply, fixing, Testing and commissioning Submersible pump set , Cap 15 HP, 2880 RPM, Discharge Cap 400 LPM at 90 Mtr head, elctric driven 415 Volt suitable for 100mm dia bore, casing pipe size 200mm(Bore size ) against Recommended BER and old submersible pump set diposited to MES yard

Replacement of damaged mild steel cold drawn ERW column pipe 3.0 mtr long, wall thickness not less than 5mm thick, 80mm bore, both end flange with mild steel column coupling 10mm thick including welding, flanged jointon both ends complete all as specified and directed by Engr-in-charge.

Supply & Fixing PVC insulated flat submersible cable with copper conductor 3 core 6 sqmm.

Supply & Fixing PVC insulated flat submersible cable with copper conductor 3 core 10 sqmm.

Supply & Fixing PVC insulated flat submersible cable with copper conductor 3 core 16 sqmm.

Supply and fixing in replacement of Star Delta Starter with over load protection 3 phase 415V 50 HZ with complete accessories as per standard specification for operating upto 30 HP submersible pump/motors including necessary connections and testing on completion all as directed by the Engineer-in-Charge.

Supply and fixing in replacement of Star Delta Starter with over load protection 3 phase 415V 50 HZ with complete accessories as per standard specification for operating upto 20HP submersible pump/motors including necessary connections and testing on completion all as directed by the Engineer-in-Charge.

Supply and fixing in replacement of Star Delta Starter with over load protection 3 phase 415V 50 HZ with complete accessories as per standard specification for operating upto 7.5 HP submersible pump/motors including necessary connections and testing on completion all as directed by the Engineer-in-Charge.

Supply and fixing in replacement of Oil immerssed Star Delta Starter with over load protection 3 phase with complete accessories as per standard specification for operating upto 60 HP motors including necessary connections and testing on completion all as directed by the Engineer-in-Charge.

Supply and fixing in replacement of DOL Starter with over load protection relay Single phase 220 V with complete accessories as per standard specification for operating upto 5 HP submersible pump/motors including necessary connections and testing on completion all as directed by the Engineer-in-Charge.

Supply, connection and testing of thermal heater wires on water supply pipe lines (GI/MS/PPR) for heating of water through minimum 25 Watt per meter in spiral/ straight line shape above outer diameter of pipe with aluminium tape insulation to preserve heat, fiber glass layer, second layer of aluminium tap to hold fiber glass by glass wool minimum 40mm thick with essential tapes complete.

Taking out the unservicable insulation to GI/DI/PPR pipe of size 63 mm bore of pipe and providing for Insulation of MS Pipe with PUF slab 40 mm thick and applying bituminuous compound and GI cladding with 26 gauge GI sheet complete including complete earthwork for clearance around the pipe compete all as specifid and as directed.

Taking out the unservicable insulation to GI/DI/PPR pipe of size 50 mm bore of pipe and providing for Insulation of MS Pipe with PUF slab 40 mm thick and applying bituminuous compound and GI cladding with 26 gauge GI sheet complete including complete earthwork for clearance around the pipe compete all as specifid and as directed.

Taking out the unservicable insulation to GI/DI/PPR pipe of size 40 mm bore of pipe and providing for Insulation of MS Pipe with PUF slab 40 mm thick and applying bituminuous compound and GI cladding with 26 gauge GI sheet complete including complete earthwork for clearance around the pipe compete all as specifid and as directed.

Taking out the unservicable insulation to GI/DI/PPR pipe of size 32 mm bore of pipe and providing for Insulation of MS Pipe with PUF slab 40 mm thick and applying bituminuous compound and GI cladding with 26 gauge GI sheet complete including complete earthwork for clearance around the pipe compete all as specifid and as directed.

Supply, fixing, Testing and commissioning Submersible pump set , Cap 05 HP, 2880 RPM, Discharge Cap 300 LPM at 80 Mtr head, elctric driven 415 Volt suitable for 50mm dia bore, casing pipe size 150mm(Bore size ) against Recommended BER and old submersible pump set diposited to MES yard

Supply, fixing, Testing and commissioning 0.5 HP single phase self priming booster Tullu pump suitable for incoming and out going 20 mm dia pipe complete all as directed by Engr -in- charge.

S&F in replacement of Reciprocating pump chemical feeder for injecting Calcium Hypochlorite employing motor-driven reciprocating chemical pump having output of 2 U.S. GPD to 40 U.S. GPD and adjustable high pressure of up to 100 PSI. High Pressure Single Head Gear Motored Adjustable dosing pump of following specifications: Adjustable High Pressure: 0 to 100 PSI, Power: 230 V 50 HZ, RPM: 44 Horsepower: 1/30 Fractional, Output: 2 U.S. GPD to 40 U.S. GPD, Pump should include with accessories: Lead Tubing, Connecting Nuts, Injection check Valve, Clay Weight, Ferrules, Liquid end of doing pump including accessories must be non-metallic etc, complete all as specified and directed.

Supply and fix in replacement Altoch dosing system non-metallic solution tank of 100 litres capacity with motor driven agitator to maintain uniform suspension throughout the tank. Electrically operated Chlorine dosing tank consisting of: Dosing tank of 100 litres of PE/FRP MOC with PE/FRP, Lid having provision for mounting dosing pump on Lid & Level Gauge along with Single Phase Electric Motor and Agitator with shaft & blade in Plastic - mounted on Tank. Lid must have port hole for pouring Calcium Hypochlorite and water when necessary. Lid must have provision for mounting dosing pump on the lid/wall complete all as specified and directed.

Day to Day maintenance / repair/ rectification of water supply complaints against any kind of fauilt in water pipe line of any size and type or No water supply complaint from building mounted OHT or any other complaint all as directed time to time digging/ tightening of fittings / caulking of lead in CI pipes joints including necessary excavation returning filling and removing surplus soil (if required)and rectification of complaint to ensure satisfactory serviceability of the water supply with help of providing the one plumber with one helper on daily basis complete all as directed by Engineer -in-charge Note :- The fitting required to replace shall be measured and paid for separately under relevant items of BOQ as 'supply only' (ii) The contractore shall be fully responsible to provide necessary transpotation, T& P and safety equipment to his labour to prevent any type of accidents and department will not responsible to provide any type of compensation to the contractor or his labour in case any accident / miss happening or any type of causality to his labour/ plumber. (iii) in case any maintenance / complaine to the contractore telephonically or verbally or on complaint slip is not rectified within 48 Hrs the contractore shall be penalties @ Rs 250/- per complaint perday and shall be recovered from the contractore's dues.(v) The contractore or his representative will repor to the concerned JE E/M daily in the morning at 9.30 AM to collect the complain and shall diposite the same to his office after rectification duly signed by the concerned user/ occupant of effected accn or area complete all as specified and directed.

Deduct Schedule of Credit of Rs (-) 58664.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

Please Enable Macros to View BoQ information