REPAIRS RENEWAL OF STREET LIGHTS AND ALLIED WORKS UNDER AGE EM.II OF GE UTILITY SECUNDERABAD

Amount

Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections including Pipes, Bricks, etc. of any descriptions, laying in Trenches and/or fixing with Walls/Poles including Segregating of Serviceable Materials viz Bricks, Pipes, etc. and keep in Safe custody for re-use, complete all as specified and as directed.

Supply and lay in trenches/fixed to walls/poles etc connecting buy using lugs and commissioning XLPE insulated and PVC sheathed heavy duty LT 1100 Volts grade armoured under ground cable with aluminium conductor of 2 Core 10 Sqmm COMPLETE all as directed. Make : Havells/Finolex/POLYCAB/KEI Note :- Earth work excavation, sand cushioning and brick protection shall be measured and paid separately.

Relaying of LT cable of size10sq mm to 120 Sqmm 2/3.5 core after carrying out necessary Repair such as joining with Epoxy joint and laid with sand Cushioning and brick protection and making connection By using Lugs all as specified and directed by ingr in charge. Note: ( Earth work , sand Cushioning, brick protection, Lt Joints shall be measured and paid separately under Relevent Item) (b) Retrived serviceable bricks/ PCC cover shall be reused under relevent item)

Supply and lay GI tubing , 40 mm bore light grade for cable protection at road crossing / on poles/ fixing of post top lantren and tubing sealed at both ends after laying the cables complete all as directed by Engineer-in-Charge. Make :- ISI

Excavation in trenches not exc 1.5 mtr wide and n.exc 1.5 mtr in deep and getting out in Hard/Dense soil laying of cables etc.

Returning filling in including spreading, leveling watering and well ramming in layers n.exc 25cm thick using excavated soil

Removing excavated surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above from the starting point

M & L for brick protection cover of old size bricks common burnt clay building bricks sub class ’B’ of size 230 X 113 X 75mm laid dry and flat abutting each other with width equal to length of brick and gap between adjacent bricks not exceeding 10 mm complete all as specified.

M&L filling approved river sand in trenches for sand cushioning of laying of cables to the full width of excavated trench 8 cm thick before laying the cable and 15 cm above the cable, gently punned down, stretching and testing of cable on transformer yard etc complete all as specified and directed. Note :- Thickness of sand cushion after punning down shall be measured for payment.

Laying only old Brick in trenches for Under Ground Cable Protection (Serviceable Materials obtained from Item No. 1 here-in-before), complete all as directed.

Taking down street light fittings of any watt ( tube light / T5 fittings only/SVL/MH FITTINGS ) existing position on pole/ wall/ tower, complete and deposite to MES store yard complete all as specified and as directed

Taking down serviceable street light fittings of any watt and type from existing position on pole/ wall/ tower including bracket / clamp and refix the same at new location in pole complete all as specefied and directed.

Taking out unserviceable junction boxes of any type or size for replacement from pole/wall and removing the same from site completeall as specified and directed.

Taking down old unserviceable post top lantern/bollard / Garden/ Gate light fitting of any watt and type from existing position complete for repair and replacement all as specified and as directed

Supply, fixing, connecting and testing post top light fitting in spherical shape polycarbonate PMMA clear diffuser and IP65 protection, new generation energy saving and environmental friendly long life aesthetically desinged aluminium decorative luminaires with high power LED as light source of capacity 1X35/40 watts, fixed to Pole/Wall in any position including taking down old existing street light fitting of any type and capacity complete all as specified and directed. Make:- PHILIPS Cat Part No BGP161 LED2500/NW PSU 220-240V 7043 IN or CG MODEL NO LPTO 40 CDL/ Surya model lP07 501-XXX-57-CL / Havells Cat No. RUBYPT35WLED757PSYMTOPC or Wipro cat No.LP07-501-XXX-57-CL.

Supply, fixing, connecting and testing decorative LED Bollard light with opal diffuser and aluminium reflector of 8/9/11 watt LED including nut, bolts, washers, clamps etc as in repair complete all as specified and directed. Make:- C&S Cat Part NoLTGLCW9WLED or SURYA MODEL NO SLEBL 6W BLK800 or Havells Cat No. BAMBOOBL8WLED830SSYMTOPCM (1.0) or Wipro cat No.LB14-131-XXX-65-05.

Supply, fixing, connecting and testing energy saving, environmental friendly long life Varsatile pressure die cast aluminium alloy for housing (heat sink) with IP66 protection road way light fitting with high power LED as light source of capacity 60 watts with warranty option of 5 years with suitable driver and cable gland for maintaining ingress protection with Epoxy powder coated siemens grey finish after phosphochromate treatment, Tempered protective toughened glass,thermal shock and impact resistant fixed to the housing with SS screws , High efficiency long life LED chip in modules with lumen efficacy of >140 lm/W with PC lens and system lumen 6000. Powered by Built-in electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection. CCT 5700, CRI>70, THD<10%, PF>.95, IP66, IK07.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +50 DEG.C; Input Supply Voltage Range:140-270 V, Frequency : 50-60 HZ, Driver

safety requirement standards :IS 15885-2-13, Test report to be submitted for Driver performance requirements as per IS 16104, for Photo bilogical safety norms as per : IS 16108, Certification as per LM 79 for Luminaire , LM 80 for LED Source, with all standard accessories etc, including disconnecting and taking down old existing light fittings any type/capacity from any height/position complete all as specified and as directed. Make: Bajaj Cat No.BRTFG 60W LED V3 or Havells Cat No. ENDURAPEARLPLUSSL60WLED757SASYTOPC, SURYA CAT NO: SLEUL60W IP66 (LXN) or Wipro cat No. LR02-671-XXX-57-XX.

All as per item No.17 above, but 70/72 Watt LED Street light fitting with minimum system lumen out put 9000 lumen. Make: Bajaj Cat No.BRTFG 70W LED I or Havells Cat No. ENDURACITYLINERNEOSL70WLED757PASYBOTG, SURYA CAT NO: SLEUL72W IP66 (LXN) or Wipro cat No. LR02-781-XXX-57-G2.

All as per item No.17 above, but 90 Watt LED Street light fitting with minimum system lumen out put 9000 lumen. Make: Bajaj Cat No.BRTFG 90W LED I or Havells Cat No. ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO, SURYA CAT NO: SLEUL90W IP66 (LXN) or Wipro cat No. LR02-102-XXX-57-XX.

All as per item No. 17 here-in-before but Flood light of high power LED as light source of capacity 200 watts.. Make: Make : Bajaj Cat No.BARFEG 200W LED or Havells Cat No. JETAVALOURFL200WLED757PINTWBLTG, SURYA CAT NO SLEFEL200 WATT IP66 LUMOS II or Wipro cat No. LF20-272-060-57-G2.

All as per item No. 17 here-in-before but Flood light of high power LED as light source of capacity 150 watts.. Make: Make : Bajaj Cat No.BARFEG 150W LED or Havells Cat No. JETAIRISFLS150WLED757PSYMLTG, SURYA CAT NO SLEFEL150 WATT IP66 LUMOS MAX or Wipro cat No. LF20-192-060-57-G2.

All as per item No. 17 here-in-before but Flood light of high power LED as light source of capacity 100 watts.. Make: Make : Bajaj Cat No.BARFEG 100W LED or Havells Cat No. JETAIRISFLS100WLED757SYMLTG, SURYA CAT NO SLEFEL100 WATT IP66 LUMOS MAX or Wipro cat No. LF20-122-060-57-G2. Notes for item Nos 17 to22 :- (i) LED's used should be the make of Cree/Osram/Lumilieds/Nitchia, (ii) Contractor has to produce LM-79/ LM-80 certificate along with purchase vouchers and Guarantee certificate from Manufacturer. (iii) Surge protection (In-built) of the drive shall not be less than 10 KV or equivalent model in philips or Wipro.

All as per item No 23 above, but single phase load of 12 KW with Circuit wiring min25 sq mm 1 nos contactor each of 40 amps incoming and outgoing MCB (1 nos) rating 40 amps Make:-Model No. Swadeep-02EC 12 kW1P or equivalent make as approved. Note for item No 23and 24 :- (i) The contractor shall be obtained 1year gurranty and 1 year warranty for the sensor and 1 year warranty for the other accessories from the manufacturer and submitted to the deparment duly signed by all concerned.

Cutting the existing PCC PATH / road straight by manual, depth and width not less than 0.5 mtr below ground level for passing of underground cable and filling back with excavated soil upto 75% road portion and 25% shall be made with cement concrete 1:2:4 (using 20 mm graded aggregate stone complete all as specified and directed.

Supply and lay PVC Insulated , PVC sheathed industrial HV round multicore flexible cable with copper conductor THREE core 2.5 sqmm including PVC conduit 20 mm dia medium grade and necessary bends, fittings and fixtures as required for connection of light fittings . ( uSED FOR GARDEN LIGHT CONNECTION, EXCAVATION , RETUNING FILLIING ETC WILL BE MEASURED AND PAID SEPARATELY.

Supply anfd fix locally available glob light best quality clear with and including LED bulb 9 watt of 200 mm dia complete suitable for fixing in 40/50 mm dia GI pipe including necessary connections complete all as specified and directed

Supply anfd fix locally available glob light best quality clear with and including LED bulb 9 watt of 300 mm dia complete suitable for fixing in 40/50 mm dia GI pipe including necessary connections complete all as specified and directed

Supply, lay, test and commissioning of galvanized iron tubing 50 mm bore light grade with all fitting for fixing of garden light incl necessary clamp, bolt/nut if any and making hole on wall complete all as specified and as directed.

Material and Labour for drawing two runs of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 2.50 sq mm with one run of PVC insulated unsheathed single core multi stranded copper conductor FRLS cable of size 2.50 sq mm including 20mm dia PVC conduit of dia 20 mm medium gradeexclusive of boxes but inclusive of all tees, bends, elbow, reducers etc and fixing accessories such as couples, lock nuts, saddles, pipe hooks, clamps etc complete all as specified

S & F hot press moulded SMC junction / terminal box of size with internal diamensions of 200 x 140 x 95 mm with hinged door, incl provision of 2 way connector 415 Volts made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs/glands, fixied on pole by means of clamps made out of MS flat iron of size 25 mm x 3 mm including dismantling of old unserviceable all as specified and as directed.Make: Hensel/Syntex/C&S/nyptune

Supply and replace contactor ML 3 with coil operating voltage 230 Volt complete all as directed

Supply and replace contactor ML 2 with coil operating voltage 230 Volt complete all as directed

Supply and replace Timer Analog Type Suitable for 24 hours operation of street light of 16 amps capacity (LEGRAND/AVV/CG)

Supply and Replace MCB SP 32 Amps 10 KA, C Curve complete all as directed

M&L for road crossing/drain crossing by adopting trench less tunneling work through specified pipe jacking method by erecting the equipment to true to the allignment and gradient by haidrolic pipe jacking technique complete including tunneling, excavation in any type of soils including hard rock, MS casing pipe havy duty of size 100 mm dia with 3 mm thick in any length including jointing materials to carry LT UG cables of size upto 120 Sqmm and necessary conveyance charges of machinery and other required materials in co-ordination with the concerned authorites complete all as specified and as directed.

M&L for stright Through Joint heat shriankable type suitable for 1100 volt 10 - 25 Sqmm 2/3.5 core complete all as specified and directed

M&L for PCC 1:3:6 type C1 using 20mm graded aggregate as in coping /pedestals of poles including necessary form work and applying two coats of white wash to exposed surface of coping/platform complete all as specified and directed.

M&L for twin core 1100 volt grade aluminium service wire cross sectional area 2.5 Sqmm for connection of light complete all as specified and directed

M&L for twin core 1100 volt grade aluminium service wire cross sectional area 4.0 Sqmm for connection of light complete all as specified and directed

Fabrication and installation of GI pipe bracket made of midium Grade tubing of size 40 mm dia, duly bended by hot forgoing after filling of sand, length 1.20 mtr including providing two pair of MS flat strip clamps 40 mm x 4 mm with GI bolts nuts and washer complete all as specified and directed

omsai thermax engineers

M/S K Rama Rao

EXELLENT POWER CORPORATION

STANDARD AGENCIES

Srinivasa Consructions

diesel power services (a.p)

Shreshta Associates

K LAKSHMAN SINGH AND CO

L and S ENTERPRISES

POWER CONSTRUCTION COMPANY