SMPK/KDS/CIV/T/2993/66

Earth work in excavation of the foundation tranches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing spreading or stacking the spoils within a lead of 75Mtr as directed. The Item including necessary trimming the sides of tranches, levelling, dressing and ramming the bottom, bailing out water etc. as required complete. Depth of excavation not exceeding 1500 mm.

Dismantle R.C. floor, roof beams etc. including cutting rods and removing rubbish as directed within a lead of 75 Mtr including stacking of steel bars in ground floor including roof.

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. -In ground floor including roof. Upto 150 mm. thick.

Brick work with 1st class bricks in cement mortar (1:6) In superstructure, ground floor.

Provide and lay plaster to wall, floor, and ceiling with sand & cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface by chipping, etc., including throating, nosing and drip course where necessary in ground floor. (b) 20 mm thick plaster with 1:6 Cement mortar

Rule pointing to brick work in cement mortar (1:4) including raking out joints & top finishing.

Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. 150mm diameter [Note: Diameter of pile to be measured at a distance of1.5m from the thicker end.]

125mm dia

Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. 150mm diameter. [Note: 1) Payment to be made on the length driven into the ground, diameter of the measured at 1.5m. from the thicker end.]

Labour charges for fixing runner (125 mm dia bullah Diameter to be measured at a distance of 1.5m from the thicker end.) including drilling hole on driven bullah & runner ,fixing with bolts, nuts & washer. (Cost of bolts, nuts & washer and Eucalyptus Bullah paid separately. )

Coal tarring on wooden surfaces including cost of materials. Single coat

Supplying, fitting, fixing bolts with nuts, washer: Length above 150mm. 10 to 16 mm dia

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. Pakur variety (For Tidal Zone)

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. Pakur variety (For pre cast slab & other)

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur Variety

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof) 25 mm to 30 mm shuttering without staging in foundation

Hire and Labour Charges for shuttering with hard wood for precast R.C. Slab curved, or straight and striking out the same including fitting, fixing the precast slab in position with necessary carriage and haulage, hosting etc, complete in all respect. (only the area in contact with concrete to be measured)

Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturer’s specification. (0.4 Kg / m² of concrete surface).

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Provide reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary cutting to requisite length, Hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter section, complete as per drawing and direction. For works in foundation and upto roof of ground floor/ upto 4Mtr. Tor steel/Mild steel. Other manufacturer not specified.

Supplying fitting and fixing in position 8 mm. to 12 mm. thick Dholpur slab in wall, dado making suitable arrangement to hold the stone properly with approved polymerised adhesives (6 mm thick) as per ISI specification including pointing with cement mortar (1:2) (1 cement: 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of Engineer-in-charge including cost of all materials, labour, scaffolding, staging, curing complete [using white cement for pointing @ 2.4 kg/Sq.m] In ground floor

18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]