REPAIR TO FLOORING, TILING, WALL PANELLING, CEILING, CERTAIN B/R WORKS IN ZONE-II UNDER GE (A) JAISALMER

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement.

M&L for 10mm thick rendering in CM 1:4 for backing coat for laying wall tiles.

M&L for 15mm thick screed bed or bedding layer of cement mortar in CM 1:6 for laying floor finish.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

S&F vitrified ceramic tiles light shade /double charged/ultra charged as directed, 10mm thick (square /rectangular), coloured, polished ,area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm (actual size of tile shall be 600x 600x8mm thick), in floors etc. set with and incl provison of suitable chemical adhesive of 3mm thickness (usage of adhesive shall not be less than 3 Kg/ sqm) and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles & floor tiling incl chemical complete all as specified and directed.

Material and labour for glazed ceramic tiles in vertical surfaces 350x 250x 7mm / 450 x 300 x 7mm thick coloured set and jointed in neat cement slurry and pointed in coloured cement all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing as specified

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete.

M& L plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone, copings, bed plates ,water through and the like including wethering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) set in CM 1:4 complete all as specified and as directed by Enginneer in charge

S & F in repair Bib tap cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia

S & F in repair 20mm stop cock cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends or for unions etc

S & F in repair 15 mm Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs Viteous China squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) all as specified & directed.

S & F in repair PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets

S & F in repairs plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device complete

S & F in repair vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket etc complete

S & F in repair Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed

S&F in repair gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20 mm bore pipe.

S&F Towel rail 600 mm long of CP brass fixed with and including chromium plated brass screw and wooden/plastic cleats (minimun weight 190 gms)

S&F in repair PVC connection 450mm long and15 mm dia with brass fly nut at both ends complete.

S&F in repair Vitreous china urinal ,half stall type ,complete incl providing and fixing plugs bedding urinal against wall in CM1:4 securing urinal to plug with and incl 60mm long brass screws ,pointing around urinal back in cement ,incl grating union for discharge pipe etc.

S & F in repair looking mirror 600x450mm with PVC sheet frame and back supported with 6mm thick AC building board or plywood sheet complete all as directed by Engr-in-Charge

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

S & F Galvanised mild Steel water tubes,15 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed.

S & F Galvanised mild Steel water tubes, 20 mm bore with all fittings, 'medium grade', ISI marked, galvanised, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity)

M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top, white colour ) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete fixed in repairs.

M&L for 20 mm ball valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or ferrule and fixed in rapair complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F, 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S & F in repair 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats

Taking down Aluminium anodised door, window and ventilator complete.

S&F Aluminium anodised frame for doors, windows, ventilators and partition in room with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F aluminium anodised window and ventilator shutters,fixed type without sash bar aluminium section wt 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised snap beading, screws etc, complete all as specified.

S&F Anodised aluminium door shutters,aluminium section wt 0.55 kg/m including necessary jointing cleats ,glazing clips rubber neoprane packing ,handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc complete all as specified.

S&F 5.5mm thick sheet glass, ordinary quality and glazing in squares not exceeding 0.5 Sqm in each pane complete all as specified & directed by Engineer-in-charge.

M&L for 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work fixed in any position, complete all as specified and directed by Engineer-in-Charge

S&F solar control film 50 micron reflective type sicked to glass panes as per instruction of manufacturers.

S&F Aluminium anodised butt hinges 125mm long.

S&F 100mm brass 4 Levers mortice lock vertical type.

S&F in repair 100mm brass 4 Levers mortice lock vertical type.

S&F Aluminium (Die cast) body door closer hydraulically regulated, desigantion No. 3, universal type, Suitable for door shutters of 851 to 1000mm in width and weight between 61to 80Kg.

S&F Brass 300mm,ordinary rat tail rod pattern springs including roller and roller plate complete.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S & F for 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F 250 mm aluminium anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed

Supply and fixed aluminium handles, cast type, anodised 150 mm size complete all as specified.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) of any description, any thicknes including cover fillets and frame work etc, complete all as specified and directed.

M & L for providing and fixing Gymsum board 12mm thick in ceiling fixed with screw as per manufacturer's instructions

S& F anodised aluminium snap grid frame work for false ceiling all as specified.

S&F hangars 6 mm dia, GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long size of grid 605 x 605 mm and expansion hold fasteners 12.5 mm dia, 40 mm long compplete all as specified

M& L for two coat of Oil bound distemper on ceiling surface

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing

Demolition and breaking up drain pipes (salt glazed ware AC or RCc) set in cement mortar 150 mm dia.

Demolition and breaking up drain pipes (salt glazed ware AC or RCc) set in cement mortar 200 mm dia.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe all as specified.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 200mm dia pipe all as specified.

M&L for 150mm dia SGSW drain pipes grade `A’ (ISI marked) laid in trenches and jointed in CM 1:1 and tested complete as directed by Engineer-in-Charge.

M&L for 200mm dia SGSW drain pipes grade `A’ (ISI marked) laid in trenches and jointed in CM 1:1 and tested complete as directed by Engineer-in-Charge.

Dadhich Engineers

BHAGWATI CONSTRUCTION

Leelashah Enterprises

M/S SHRI HARI CONSTRUCTION COMPANY

S AND S Constructions