WBPWD/EE-II/CKHED/eNIT-19/ 24-25

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (RR Cable/KEI/ Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/ Perspex (wall matching colour) top cover 3 mm thick and incl.175mmx100mmx 65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish as to GS. [Vide page No E-14, Item No-2 ]

Average run 10 mtr [Vide page No E-14, Item No-2 (e)]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20/25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.. [Vide page No E-14, Item No-1(a) ]

a) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [Vide page No E-14, Item No-1(a). iii ](For Power plough and Computer point)

b) 2x6 sqmm+1x 4 sqmm ECC) [ TPNDB to SPNDB ] [Vide page No E-14, Item No-1(a). iv ]

c) 4 x 16 sqmm + 2 x 10 sqmm ECC) [ VTPN to TPNDB ] [Vide page No E-9, Item No-1(g1) ] & E-16, 7(b)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.[Vide page No F-5, Item No-9 (i)& (ii)]

a) 2x2.5 sqmm+1x 1.5 sqmm ECC

b) 2x6 sqmm+1x 4 sqmm ECC) [ TPNDB to SPNDB ]

d) 4 x 16 sqmm + 2 x 10 sqmm ECC) [ VTPN to TPNDB ]

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board. [Vide page No D-13, Item No-20a ]

Supply & Fixing 240 V, 20 A Piano key type Plug socket (Make:- Anchor) on sheet metal switch board incl. S & F 100x100x65mm MS(16SWG) switch board and bakelite /perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. [Vide page No-8, Item No17b ]

Supply and Fixing 240V 3 nos 6A,1 no 20A Plugh Socket with separate 3 nos 6A 1No 20A Pino key type switch 1 No Indicator 1 no 6A MCB on shet metal switch bpard embeded in wall incl. supply and fixing 240X200X65 mm MS(SWG) switch board and bakelite perpex top cover of 3 mm thick by brass screws after making housing for switch by cutting bakelite/perpex cover and necy. connection as required.(Four number room for Computer point)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Incoming - 230V,40A, DPMCB Isolator (1-nos) Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB - (12-nos)

2+12 way [Legrand/ L&T/ ABB]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-10, 14] Incoming - 415V,63A, FPMCB Isolator (1-nos) Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB - (18-nos)

6 way [Legrand/ L&T/ ABB]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [Vide page No D-11, Item No-15] Incoming - 415V, 25/35KA, 160A, FPMCCB (1 -nos)[Vide page No D-8, Item No-10] Outgoing - 10KA, (C-characteristics) 63A, TPMCB - (6 -nos)[Vide page No D-6, Item No-7

6 way [Legrand/ L&T/ ABB]

Supply and Delivery of 1.1 KV grade following sizes Al. armoured PVC/XLPE cable (Gloster/Havells/polycab) as mentioned below as per choise of EIC.

4 Core 70 sqmm

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. [[Vide page No F-1, Item No-2(d)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. [[Vide page No F-4, Item No-7]

4 Core 70 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. [Vide page No F-5, Item No-8(b)]

4 Core 70 sqmm

S & D 48″ sweep, 230V 1-Ph. AC ceiling fans incl. all accss. The capacitor of fan must be P-2 type brust proof & must have safety wire directly linked from fan hook to stator of fan. 1200 mm Sweep [Make:Crompton-Aura Metallic/Orient-Quassar) --- Color-Brown], as directed by EIC.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [ C-3,21a ]

Supply Single LED T/L fittings( Philips TMC 501 P 1xT-LED 22W P3241) incl. 1x MAS LED tube (PC body) 1200mm 18W865 T8 I --2100 lm.)

Supply Twin LED T/L fittings( Philips TMC 501 P 2xT-LED 22W P3242) incl. 2x MAS LED tube (PC body) 1200mm 18W865 T8 I --2100 lm.)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “U” type MS clamp whose both side fixed on ceiling with suitable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 3x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. ][Vide page No C-2, Item No-17]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 3x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [Vide page No C-2, Item No-16]

Supply of 250V 450 mm sweep H D Wall fan complete fully (Metal Body) 18” Air Circulator (EPC)

Supplying & Fixing of 250 volts, 50Hz, sweep 1420 R.P.M. heavy duty exhaust fan complete with all accessories after making hole on wall and mending good damages as per practicable incl.(Make-EPC) as to GS.

a) 300 MM (12”)(Toilet)

b) 450 Mm(18")(Nurshing Kitchen)

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) [D-14,32 ]

300 MM (12”) for Al [D-14,32(a)]

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

Electromech Engineers Co-Operative Society Ltd. (BID ID -5491734)

A.P. ELECTRICAL (BID ID -5509977)

M/s Singh Electrical Works (BID ID -5491643)

EFFORTECH (BID ID -5516263)