ADD ALTN OF BLDG NO P 219 I FD COY EME AND OTHER SANCTIONED WORKS UNDER GE BRICHGUNJ

Amount

Demolition of Precast Concrete Block work built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed.

Dismantling boarding of any description, fixed in any position with nails/screws

Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L Rendering 10mm thick on concrete surfaces in CM (1:6) finished even & smooth without using extra cement.

M & L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of putty complete all as specified and as directed.

M&L for complete removal of old surfaces of walls and applying two coats of oil bound distemper over a coat of resistant primer complete all as specified and as directed.

M&L for coloured glazed ceramic tiles,300 X 450 mm x 7mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tile over and including rendering 10mm thick in CM 1:3 complete all as specified and as directed .

Supply and fix UPVC 20mm bore pipes of pressure rating 10 Kgf/Sqcm fixed with all fittings and fixed to walls and ceillings or laid in floors etc complete all as specified and as directed.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed .

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitredand jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and as directed.

Supply only 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and as directed.

Supply only 4.0mm thick sheet glass, ordinary quality in squares exc 0.50 sq.m in each panecomplete all as specified and as directed.

Supply only 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply only 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

Supply only 100MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified

S&F 75 mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix aluminium composite panel sheet of 4 mm thick with 0.5 mm thick aluminium sheet both sides as in cupboards,wall cladding and false ceiling fixed on aluminium frame works with plastic strips (Double sided sticker ) of suitable size of varying thickness of 10mm to 30mm applying adhesive over and including aluminium frame work for fixing composite panel with screws .The joints in panels shall be filled with weather proof sealant,the board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and directed.

S&F in repairs over head shower 105 mm round shape single flow with air effect (ABS Body & face plate chrome plated with rubit cleaning system jaquar Cat part No HSH-1719 completed all as specified and directed.

S & F in repairs Angle Cock, 15 mm dia, cast copper alloy with capstan head, Chromium Plated, screwed down high pressure with crutch or butterfly handle for iron pipe etc. complete all as per Jaquar Catalogue No. OPP-CHR-15053PM or its equivalent in Marc or Plumber complete all as specified.

S&F wall mixer 3 in 1 system with connecting legs &wall flange (without hand &over head shower of jaquar Cat part No CON-281KN complete all as specified and directed.

S & F in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook , complete all as specified and as directed by Engineer-in-Charge. (Make : Jaquar cat No ALD-CHR-573)

S & F in repairs glass corner shelf, Cat No.1173 of Jaquar or equivalent, complete all as specified and as directed by Engineer-in-Charge.

S&F in Repair Jaguar Glass Shelf 550mm long Make: Jaquar Cat Part No AQN 7771 all as specified and directed by Engineer in charge. .

S & F in repairs 15 mm dia bore single lever basin mixer without popup waste and 450mm long braided hoses complete all as specified and as directed. (Make : Jaquar cat No ARI-CHR-39001B or equivalent )

S&F in repairs stop valves 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed complete all as specified and as directed.

S&F in repairs PVC flexible connections 15 mm dia 450 mm long with brass checknuts complete all as specified and as directed. .

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with and including hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long etc complete all as specified

S&F 10mm PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing etc complete all as specified and as directed.

Taking down carefully aluminium point wiring (light, fan, socket or power) DBs complete offering credit, making good disturbed surfaces of walls, floors, etc, all as specified and as directed.

M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including concealed PVC conduit and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets,fan regulators etc., all as specified and as directed for the following:-(a) One light point controlled by one switch

(b) One exhaust fan point controlled by one switch

(d) One fan point controlled by one switch and one regulator

(e ) One 3 pin switch socket outlet point 5 amps on same board with other switches

(f) One 3 pin switch socket outlet point 5 amps on independent board

All as per item No 32 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed.

Supply and fixing Modular switch 1 way 5 A, 1 module all as specified and directed.

Supply and fixing Modular switch 1 way 15 A, 1 module all as specified and directed.

Supply and fixing modular socket outlet, 2/3 pin combined , 6/16 Amps, combined 2 module, 230 volts all as specified and directed.

Supply and fixing modular socket outlet, 2/3 pin combined , 6 Amps, combined 2 module, 230 volts all as specified and directed.

S & F modular white cover plate with frame, 3 module all as specified and directed.

S & F modular white cover plate with frame, 6 module all as specified and directed.

Supply and fixing modular fan step regulator, 230 V, AC, 120W - 2 module complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and as directed.

Taking down old serviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site with new clamps, nuts, washers & bolts including cotter pin for complete all as directed.

S & F in repairs Single Pole and Neutral Enclosure with Two Pin Earth Plug and Socket complete with one MCB, SP, 20 Amps, 240 Volts fixed on flat iron 32x6 mm or 2nd class hard wood wooden board complete all as specified and as directed.

Supply and fix in repair metal enclosure distribution board SPN, 12 way 240 volts, with 200 amps rated bus bar, double door suitable for mounting MCBs including taking down old MCB/DB complete all as specified and directed. Note-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc

Supply and fix MCB single pole 240 volts, 6 to 32 amps "B" series complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair single pole and netural 240 Volts 63 amps complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair recess mounted LED 12 w Round type downlighter with die cast aluminium housing coating prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair energy efficient aluminium housing LED Smart bright batten 10 Watt mounted batten fitting 2 ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as directed.

M & L in repairs for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Conduit and all accessories fixed to wall/ roofs/ floors etc with one run of 4 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.

Supply and fix switch piano flush button single pole oneway 5 amp complete all as specified and as directed.

Supply and fix switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, aluminium housing AC decorative box type 4 feet with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed and as specified by the engineer in charge.

Supply and fix exhaust fan steel body suitable for on working of AC 230 V ,50 Hz 300 mm sweep 1400 RPM,with heavy duty motor ,incl louvers complete all as specified

M & L for sub main wiring complete with three runs of 6 Sqmm FRLS single core PVC insulated single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, ,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Three runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.

M & L for sub main wiring complete with two runs of 6 Sqmm FRLS single core PVC insulated single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, ,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.

All as per item 57.00 above but of size 4.0 sqmm complete all as specified and as directed.

All as per item 57.00 above but of size 1.5 sqmm complete all as specified and as directed.

All as per item 57.00 above but of size 10 sqmm complete all as specified and directed.

Supply and fix sheet metal enclosure Loadline distribution vertical DB, MCCB as incomer 4 ways 415 volts, with 200 amps rated bus bar double door suitable for mounting MCCB 100 A TPN as incomer and MCBs as outgoing, Triple pole as incoming complete all as specified and directed including taking down old MCB DBs complete.The Rate shall be included the incomer MCCB TPN of 100 Amps Note-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc

Supply and fix metal enclosure distribution board SPN, 12 way 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs complete all as as specified and as directed by Engineer-in-Charge

All as per item 62.00 above above but distribution board SPN, 4 way 240 volts complete all as specified and directed.

All as per item 62.00 above but distribution board SPN, 2 way 240 volts, single door complete all as specified and directed.

Supply and fix MCB triple pole and neutral 63 amps B series complete all as specified and as directed by Engineer-in-Charge

Supply and fix MCB triple pole 63 amps, B series complete all as specified and as directed by Engineer-in-Charge.

Supply and fix MCB triple pole and neutral 40 amps B series complete all as specified and as directed by Engineer-in-Charge

Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed.

Supply and fix Electric water heater storage type ( GeySer ) of 6 Ltr capacity BEE 5 star rated including inlet and out let connection with hot and cold pipe lines complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and all accessories etc alll as specified and direcetd

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply & fix metalic heavy duty Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting including taking down of old Air circulator fans.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fix metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, double door suitable for mounting MCBs including taking down old MCB/DB complete all as specified and directed. Note-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc

Supply and fix single pole and netural 240 Volts 63 amps complete all as specified and as directed by Engineer-in-Charge

S & F of 20 A MCB DB BOX COMBO Plastic Enclosure modular type complete with one MCB, SP, 20 Amps, 240 Volts fixed complete all as specified and as directed.

Supply, install, testing and commissioning fixed speed inverter type split air conditioner of nominal capacity 2.0 TR 5 star rated with copper compressor , suitable for working on 230 volts, single phase, 50HZ supply, complete including cutting of wall, providing stand for out door unit, required copper cable connection and standard copper tubing approx 3 RM from indoor to outdoor unit and making good disturbed surface of wall etc and remote operation complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and as directed.

supply & Lay XLPE insulated, heavy duty 1100 volt grade electric armoured LT UG cable with aluminium conductor of size 25 Sqmm 3.5 Core in trenches/along the wall/including making all connections, saddles, spacers including scaffolding if any required for saddling the cable in walls of building of height up to 25 meter, complete with aluminium lugs as required at site and as directed by Engr-in-Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/loose Soil

Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cm soil / hard dense soil.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point.Soft Soil / hard dense soil

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed.

Gulmarg Electrical Service (BID ID -3393722)

M/s G K Enterprises (BID ID -3394317)

MAJUMDAR FURNITURE (BID ID -3394681)

M/s Ramesh Lal (BID ID -3395217)

Nirman Construction Company (BID ID -3394106)

Bismi Builders & Enterprises (BID ID -3394332)

M/s Kamal Electrical (BID ID -3394767)