Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.5 LAccepted-AOC | L1 | Accepted-AOC Acceptance of tender | |
| 2 | L2₹39.6 L+₹7.2 L (22.2%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | L2 | Rejected-Finance being not L1 |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
31 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Lucknow
HQ CWE Lucknow, 229 MG Road, Lucknow Cantt, Lucknow-226002
SPL REPAIRS OF WINDOWS AT VIVEK VIHAR COLONY UNDER GE WEST LUCKNOW
2022_MES_543288_2
CWE/LKO/W/T-57 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
Izatnagar
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE West Lucknow
₹74,000
Yes
20 Dec 2022
11 Oct 2022
2 Nov 2022
11 Oct 2022
31 Oct 2022
19 Oct 2022
11 Oct 2022 - 19 Oct 2022
Amount
Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm each and removing the same from sites complete all as specified and directed. Note : Cost of making good of walls (Brickwork, cills & Jambs) after taking down of window chaowkhats shall be deemed to be inclusive in quoted unit rate.
All as item No 1 above but exc 1.5 Sqm and n.exc 4 Sqm each.
M&L for brick work with sub class "B" brick (old size) straight or curved on plan exc 6m mean radius built in CM 1:6 including demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement includimg taking down cement cement plaster from brick wall and racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coat oil bound distemper over Chalk whitening distemper to match the existing surface complete all as per specified and directed.
M&L for preparation of new plastered surfaces and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed
Supply and Fixing Steel Box type Windows/Ventilators with both provisions ie glazed and gauzed double panel / single panel shutters, Gauzed shutter shall be fixed in inner side and glazed shutter shall be fixed at outer side of the frame. The section of outer frame shall be 60 x 45 mm, F/S mullion/ transum 60x30x25 mm, F/S shutter frame 50x35x20mm, with handle and stopper of Z sec of size 20 x 25x 20mm. The section shall be made of ERW Section of 16 Gauge. 02 Nos of Box type hinges 75 mm long 12 mm dia with one part of hinges spot welded with frame and other with shutter for each openable shutter. 04 Nos of flat iron fast shall be welded with each window. 100 mm long handle and 150 mm long tower bolt shall be welded to each openable shutter. 10 mm square guard bar shall be provided @ 125mm c/c complete all as specified and shown in CELZ Drawing No LZ/C-TD/130 SHEET NO 1/4 to 4/4. Note: Glass panes and wire mesh shall be measured and paid separately under respective items of this schedule.
M&L for preparation of new plastered surface of any description exceeding 10 CM width and girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as per specified and directed.
S&F 3.00 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
QUALITY CONSTRUCTIONS CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .